WPM 10oz and 22oz WPM Barista Bundle in Cinder
Regular price $94.50 Sale price $91.50 Save $3.00The WPM 10oz and 22oz WPM Barista Bundle in Cinder pairs two of WPM's most trusted pitcher sizes in a single matte gray finish with a warm red undertone. Baristas get a small pitcher built for precise, low-volume pours and a large pitcher built for bold service and to-go pours, both finished to match for a consistent look on the bar.
This bundle is designed for baristas and cafes that need one pitcher for delicate small-cup latte art and another for higher-volume service, without mixing finishes or replacing an entire pitcher set piece by piece.
– Two pitcher sizes in one matching Cinder finish, so small-cup and large-cup service share a consistent look.
– 10oz Model #26 pitcher with a medium-wide spout balances flow and control for cups under 6oz.
– 22oz Model #09 pitcher with a wide spout delivers a bold, high-flow stream for large to-go cups and milk sharing.
– Signature WPM slanted top on both pitchers brings the milk stream closer to the crema for easier pour starts.
– 9.5oz milk volume indicator on the 22oz pitcher helps gauge steamed milk levels before pouring.
– Wide diameter vessels on both sizes give steaming milk more room to move for smoother microfoam.
– 304 (18/8) stainless steel construction with an uncoated, food-safe interior on both pitchers.
– Cortados, small cappuccinos, and gibraltars using the 10oz pitcher.
– Large to-go cups and higher-volume service pours using the 22oz pitcher.
– Milk sharing between two pitchers of matching size and finish.
– Cafes and home baristas who want one finish across both small and large pours.
WPM builds its pitcher line around matching a proven body and spout profile to a specific pour volume, rather than scaling one design across every size. The Cinder bundle applies that approach across two sizes at once, giving baristas a small pitcher tuned for controlled, low-volume pours and a large pitcher tuned for higher flow, both finished in the same ash gray coating with a red hue.
Pairing the 10oz and 22oz pitchers together also supports a common café workflow: the smaller pitcher for individual small-cup orders and the larger pitcher for shared or to-go volumes, without switching between mismatched finishes during service.
The 10oz pitcher uses a medium-wide spout that balances flow and control at small volumes. It is sized for cups under 6oz, including cortados, small cappuccinos, and gibraltars, where controlled placement matters more than pour speed.
The 22oz pitcher uses a round, wide spout suited to bold, dramatic pours. It is built for larger to-go cups and for milk sharing, where a higher flow rate speeds up service without sacrificing pour control.
Both pitchers use WPM's signature slanted top, which angles the milk stream toward the crema surface sooner. This reduces the tilt needed to start a pour and applies to both the 10oz and 22oz pitchers in this bundle.
The 22oz pitcher includes a 9.5oz milk volume indicator built into the slanted top, giving baristas a visual reference for steamed milk levels before pouring or sharing between pitchers.
Both pitchers use a wide body diameter relative to their capacity. This gives steaming milk more room to move during texturing, supporting smoother microfoam in both the small and large pitcher.
Both pitchers include a full loop handle sized to accommodate a range of grip styles, keeping the pour stable from initial tilt through finishing lines.
The Cinder finish is a matte gray powder coating with a subtle red hue over the exterior of both pitchers. The interior on both sizes is left uncoated, keeping it food safe and easy to clean after each use.
The name Cinder, an ash gray finish with a red hue, is credited to Morgan Eckroth.
The 10oz pitcher is sized for cups under 6oz, including cortados, small cappuccinos, and gibraltars. The 22oz pitcher is sized for larger to-go cups and for milk sharing between service pours.
The 10oz pitcher's medium-wide spout produces a balanced flow suited to controlled placement at small volumes. The 22oz pitcher's wide spout produces a higher flow rate for bold, dramatic pours at larger volumes.
Keeping both sizes in the same Cinder finish lets baristas move between small-cup orders and larger to-go or shared pours without switching pitchers of different colors during service. The 22oz pitcher's milk volume indicator also makes it easier to divide milk between the two pitchers when sharing.
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#26 |
|
Capacity |
10oz (300ml) |
|
Spout |
Medium-wide spout |
|
Top Design |
Signature WPM slanted top |
|
Body |
Wide diameter relative to capacity |
|
Handle |
Full loop handle |
|
Material, Interior |
304 (18/8) food-grade stainless steel, uncoated |
|
Material, Exterior |
Matte gray (Cinder) powder coating |
|
Manufacturer |
WPM |
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#09 |
|
Capacity |
22oz |
|
Spout |
Round, wide spout |
|
Top Design |
Signature WPM slanted top with 9.5oz milk volume indicator |
|
Body |
Wide diameter relative to capacity |
|
Handle |
Full loop handle |
|
Material, Interior |
304 (18/8) food-grade stainless steel, uncoated |
|
Material, Exterior |
Matte gray (Cinder) powder coating |
|
Manufacturer |
WPM |
– 1 x 10oz WPM Latte Art Pitcher, Model #26, in Cinder.
– 1 x 22oz WPM Latte Art Pitcher, Model #09, in Cinder.
Hand wash both pitchers with warm water and a mild detergent after each use, focusing on the interior where milk residue collects. Dry each pitcher immediately with a soft cloth to keep the Cinder finish free of water spots. Avoid abrasive pads, harsh chemicals, or prolonged soaking, since milk's acidity can wear down stainless steel's protective layer over time if residue is left to sit.
The bundle includes one 10oz pitcher (Model #26) and one 22oz pitcher (Model #09), both finished in matching Cinder.
Cinder is a matte gray powder coating with a subtle red hue, applied to the exterior of both pitchers. The interior on both sizes remains uncoated stainless steel.
The 10oz pitcher is designed for cups under 6oz, such as cortados, small cappuccinos, and gibraltars. The 22oz pitcher is designed for larger to-go cups and milk sharing.
Pairing the two sizes lets a barista use the small pitcher for individual small-cup pours and the large pitcher for shared or higher-volume pours, both in the same finish.
Hand wash both pitchers with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads and prolonged soaking to protect the interior stainless steel and the Cinder exterior on both pitchers.
The 10oz and 22oz WPM Barista Bundle in Cinder gives baristas a matched pair of pitchers for both delicate small-cup latte art and higher-volume service pours. Between the medium-wide spout on the 10oz pitcher and the wide spout on the 22oz pitcher, the bundle covers a full range of everyday café pours in one consistent finish.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz

Perfect for <6oz cup sizes, these beautiful pitchers are the smallest size in our lineup. Available in both narrow, round and wide spout shape options.

Our largest size. The 22oz pitcher is perfect for 12-16oz cups. This is the perfect pitcher for milk sharing or to go cup sizes. Available in narrow, and wide (previously categorized as round) options.
THAMES x WPM 20oz Free Pour Latte Art Competition Pitcher in Brushed Rose Gold
Regular price $61.50 Save $-61.50The THAMES × WPM 20oz Free Pour Latte Art Competition Pitcher was developed for baristas who pour drawing style latte art, where a free pour base is combined with etched or layered detail. Built on WPM's #30 flat top platform, this limited edition collaboration with Bangkok-based barista Platoon "Thames" Seangcharoen introduces a redesigned spout and a curved base that support smooth foam rollover and controlled combination pours.
Finished in Brushed Rose Gold, this edition pairs competition-focused engineering with a satin metallic exterior over 304 (18/8) stainless steel. The goal of the collaboration was not to reinvent the flat top pitcher, but to refine the details that most affect how milk moves, rolls, and leaves the spout.
– Smooth foam rollover helps you use nearly every drop of milk in the pitcher for your pour.
– Redesigned round-bottom spout supports the mixed foam flow that drawing style and combination pours rely on.
– Elongated, precisely angled spout delivers a controlled stream for detailed placement.
– Curved vortex base encourages a larger vortex while steaming for smoother, more consistent microfoam.
– Integrated volume gauge in the slanted top gives a visual reference for exact milk volumes.
– Built on the proven WPM #30 flat top body used by baristas in cafés and competitions.
– Laser-etched THAMES design on the body and handle marks this limited edition collaboration.
– 10oz combination pour beverages.
– Drawing style latte art, including combo pour and etched pour designs.
– Competition routines and practice sessions.
– Café service where consistent milk texture matters.
– Latte art training for baristas moving beyond basic free pour patterns.
– Home baristas refining advanced pouring techniques.
This pitcher is the result of a collaboration between WPM and Bangkok-based barista Platoon "Thames" Seangcharoen, whose competition experience spans Thailand, Malaysia, Singapore, Hong Kong, and Vietnam, including a First Runner-Up finish at the Thailand Latte Art Championship. The project blends WPM's manufacturing expertise with Thames's background in artistic, drawing style pours.
Rather than designing an entirely new pitcher, the collaboration focused on optimizing the widely used flat top format. New elements were added where they improve function: a spout reshaped for mixed foam flow, a curved base for better milk circulation, and a volume gauge for repeatable measurements. The result keeps the familiar feel of WPM's #30 body while making it more capable for detailed combination pours.
The spout was redesigned specifically to benefit mixed foam pours, where the barista needs both fluid milk and lighter foam to leave the pitcher in a controlled way. Its round-bottom profile lets foam roll over smoothly instead of catching at the lip. This allows latte artists to use nearly every drop of milk in the pitcher, which is especially useful when a design depends on finishing details at the end of the pour.
The spout is lengthened and set at a carefully designed angle so it works in tandem with the redesigned spout profile. A longer spout brings the point of release closer to the cup and narrows the stream. This makes precise drawing and controlled placement easier during the detailed stages of a combination pour.
The curved base promotes a larger vortex during steaming. Better circulation helps air incorporate evenly and supports a smoother foam transition, producing consistent microfoam from one drink to the next. Consistent texture is the foundation for repeatable latte art, both on bar and in competition.
The slanted top incorporates a volume gauge that gives a visual reference while filling and steaming. Measuring milk the same way every time supports exact volume control, reduces waste, and helps baristas reproduce the same pour across practice sessions and competition runs.
The 90° handle accommodates a range of grip styles. It keeps the pitcher stable and comfortable through the full motion of a pour, giving the barista steady command during the fine movements that drawing style patterns require.
The pitcher is built on WPM's #30 flat top body, a familiar platform with balanced handling and predictable pouring characteristics. Baristas who already train on the #30 can move to this edition without relearning the basic feel of the pitcher.
The Brushed Rose Gold finish gives the pitcher a satin rose gold look with a textured surface rather than a mirror shine. A unique THAMES design is laser etched on both the body and the handle, identifying this limited edition collaboration without affecting how the pitcher handles.
The 600cc (20oz) capacity is sized for approximately 10oz combination pour patterns. This gives enough milk volume for multi-element designs without steaming far more milk than the cup requires.
The round-bottom spout and elongated, angled tip work together to produce a smooth, controlled stream with clean foam rollover. This supports drawing style pours where the barista builds a free pour base and then adds etched or layered detail. Because foam leaves the pitcher smoothly, the final portion of milk remains usable for finishing touches.
The integrated volume gauge, curved vortex base, and stable 90° handle support repeatable milk texture and pour control. Those qualities matter on the competition stage, where a routine must be reproduced under pressure. The same consistency also benefits busy café service.
|
Specification |
Details |
|
Capacity |
600cc (20oz) |
|
Recommended Drink Size |
Approximately 10oz combination pour beverages |
|
Model |
WPM #30 Flat Top |
|
Material |
304 (18/8) food-grade stainless steel |
|
Finish |
Brushed Rose Gold |
|
Spout |
THAMES collaboration spout, elongated with a round-bottom profile |
|
Base |
Curved vortex base |
|
Handle |
90° ergonomic handle |
|
Volume Gauge |
Integrated into slanted top |
|
Branding |
Laser-etched THAMES design on body and handle |
|
Edition |
Limited edition collaboration |
|
Manufacturer |
WPM |
– 1 × THAMES × WPM 20oz Free Pour Latte Art Competition Pitcher in Brushed Rose Gold.
Hand wash with warm water and a mild detergent after each use, paying attention to the interior where milk residue collects. Dry the pitcher immediately with a soft cloth to prevent water spots on the brushed finish. Avoid abrasive pads, harsh chemicals, or prolonged soaking. Wipe the exterior with a clean microfiber cloth to keep the rose gold surface looking its best.
It keeps the familiar WPM #30 flat top body but adds a redesigned round-bottom spout, an elongated angled tip, a curved vortex base, an integrated volume gauge, and laser-etched THAMES branding.
Yes. The spout was redesigned to benefit mixed foam pours, and its smooth foam rollover makes it well suited to combo pour and etched pour designs.
The 600cc (20oz) capacity is best suited for approximately 10oz combination pour beverages.
The curved base encourages a larger vortex while steaming. This supports a smoother foam transition and more consistent microfoam.
Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads, harsh chemicals, and prolonged soaking.
The THAMES × WPM 20oz Free Pour Latte Art Competition Pitcher in Brushed Rose Gold reflects a focused collaboration between WPM and Platoon "Thames" Seangcharoen. Each refinement supports smooth foam rollover, consistent milk texture, and controlled pouring for drawing style latte art in both competition and daily service.
Pour drawing style latte art and want to work with us? Send your combo pour or etched pour portfolio to support@slowpoursupply.co to learn about product review and testing opportunities.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
SLOW POUR SUPPLY® x WPM 15oz Round Spout Latte Art Pitcher in "Hold Fast Pour Slow" - 2026 Seasonal Colors
Regular price $50.00 Save $-50.00Hold Fast right side up, Pour Slow turned over: a sailor's steadiness, brought to the espresso bar.
There's a moment right before a pour starts, when the espresso has settled and the milk is ready, where everything about the art still comes down to the angle of the wrist. Get too close too soon and the crema breaks apart. Hold back too long and the lines blur before they ever form. The SLOW POUR SUPPLY® x WPM 15oz Round Spout Latte Art Pitcher was built for that exact window: a milk pitcher for pouring lattes, cappuccinos, and other espresso-based drinks, shaped with a slanted rim and round spout, in the "Hold Fast Pour Slow" design, so you can work close to the surface without losing control of the pour.
Hold Fast is old sailor language, once inked across the knuckles of dockhands as a reminder to grip steady when the water turned rough. It carries that same idea here: stay grounded, stay resilient, hold onto what matters even as everything else moves.
Pour Slow is the other half, and it doubles as a quiet nod to Slow Pour Supply. In coffee, it means precision and patience. In everything else, it means the same thing: move with care, savor the process, and let the small, deliberate moments count.
Matthew Tabor, Art Director of the Houston design studio Letterset, translated that balance of strength and softness into a single piece of turnabout lettering. Read right side up, it says Hold Fast. Turn the pitcher over, and the same lines resolve into Pour Slow. It's drawn in a seafarer style that borrows from the hand-painted plaques and ropework you'd find on an old ship's wheel, the same tradition Letterset works in through its sign painting. Read one way, it's a grip. Read the other, it's a reminder.
That same care carries into how the pitcher pours. WPM, the pitcher's manufacturer, built the slanted rim to set a defined exit angle for the milk, letting it tilt more horizontally and bring the spout within about a centimeter of the espresso before anything starts to flow. Poured this way, the contact between milk and espresso is less abrupt, and the resulting art holds brighter whites against deeper crema.
The body holds 15 oz (450 mL), sized for the 6 to 8 oz pours common to lattes and cappuccinos. An internal marking at the 6 oz line gives a consistent fill point every time, so the milk-to-espresso ratio stays steady from one drink to the next. The handle wraps fully around the base, shaped to sit comfortably across grip styles and hold steady through a long pour.
SLOW POUR SUPPLY® x WPM 15oz Round Spout Latte Art Pitcher, "Hold Fast Pour Slow" x 1
Slanted Top: Sets a defined exit angle for the milk, letting the pitcher tilt further before the pour begins.
Round #06 Profile: Shaped for a medium line width, tuned for crisp rosettas, tulips, and hearts.
Turnabout Type: One design, two readings: right side up it reads "Hold Fast," turn the pitcher over and it reads "Pour Slow."
Seafarer Style: Hand-drawn lettering that nods to ship plaques and dockside signage, the same tradition the phrase itself comes from.
Hand-Painted Heritage: Drawn by Matthew Tabor of Letterset, a Houston studio that still practices traditional sign painting.
Weight: 235g
Material: Food-grade 304 (18/8) stainless steel

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
ROUND SPOUT

Lipped round spout for bolder lines, this pitcher is great for thicker lines - slozettas, rosetta revolution, tulips, wing bases with thicker lines, and stacks. This pitcher is great for a higher flow rate. Available in our 10oz and 15oz pitchers
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
RORA & UMPAUL x WPM 20oz #41 Free Pour Competition Milk Pitcher
Regular price $82.00 Save $-82.00Designed in collaboration with two legendary latte artists: Umpaul, the 2016 World Latte Art Champion with seven world champion titles, and RORA, the Korea National Champion and the first female latte artist from Korea to compete in the World Latte Art Championship, this special edition pitcher embodies their shared motto: “No Problem.”
The result of years of research combined with WPM’s renowned spout flow dynamics, this pitcher is engineered to elevate your pouring in every style; from your first practice swirl to competition-level designs.
Features:
#41 Tongued Spout Design – Delivers unmatched control over milk flow for even the most intricate latte art.
Versatile Craftsmanship – Performs flawlessly with any cup size or latte art style.
Elegant Ro&Um Logo – A refined stamped emblem uniting the artistry of both champions.
Dual Line Indicators – Clear, easy-to-read markers for consistent milk measurements to reduce milk waste.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Latte Art Bundle - "Hold Fast Pour Slow" SLOW POUR SUPPLY® x WPM 15oz Round Spout Latte Art Pitcher + WPM Practice Cup
Regular price $72.75 Save $-72.75A pair for the discerning latte artist, the WPM Hold Fast Pour Slow Latte Art Bundle is for those who seeks the best in the latte art pitcher world.
Hold Fast right side up, Pour Slow turned over: a sailor's steadiness, brought to the espresso bar.
There's a moment right before a pour starts, when the espresso has settled and the milk is ready, where everything about the art still comes down to the angle of the wrist. Get too close too soon and the crema breaks apart. Hold back too long and the lines blur before they ever form. The SLOW POUR SUPPLY® x WPM 15oz Round Spout Latte Art Pitcher was built for that exact window: a milk pitcher for pouring lattes, cappuccinos, and other espresso-based drinks, shaped with a slanted rim and round spout, in the "Hold Fast Pour Slow" design, so you can work close to the surface without losing control of the pour.
Hold Fast is old sailor language, once inked across the knuckles of dockhands as a reminder to grip steady when the water turned rough. It carries that same idea here: stay grounded, stay resilient, hold onto what matters even as everything else moves.
Pour Slow is the other half, and it doubles as a quiet nod to Slow Pour Supply. In coffee, it means precision and patience. In everything else, it means the same thing: move with care, savor the process, and let the small, deliberate moments count.
Matthew Tabor, Art Director of the Houston design studio Letterset, translated that balance of strength and softness into a single piece of turnabout lettering. Read right side up, it says Hold Fast. Turn the pitcher over, and the same lines resolve into Pour Slow. It's drawn in a seafarer style that borrows from the hand-painted plaques and ropework you'd find on an old ship's wheel, the same tradition Letterset works in through its sign painting. Read one way, it's a grip. Read the other, it's a reminder.
That same care carries into how the pitcher pours. WPM, the pitcher's manufacturer, built the slanted rim to set a defined exit angle for the milk, letting it tilt more horizontally and bring the spout within about a centimeter of the espresso before anything starts to flow. Poured this way, the contact between milk and espresso is less abrupt, and the resulting art holds brighter whites against deeper crema.
The body holds 15 oz (450 mL), sized for the 6 to 8 oz pours common to lattes and cappuccinos. An internal marking at the 6 oz line gives a consistent fill point every time, so the milk-to-espresso ratio stays steady from one drink to the next. The handle wraps fully around the base, shaped to sit comfortably across grip styles and hold steady through a long pour.
SLOW POUR SUPPLY® x WPM 15oz Round Spout Latte Art Pitcher, "Hold Fast Pour Slow" x 1
Slanted Top: Sets a defined exit angle for the milk, letting the pitcher tilt further before the pour begins.
Round #06 Profile: Shaped for a medium line width, tuned for crisp rosettas, tulips, and hearts.
Turnabout Type: One design, two readings: right side up it reads "Hold Fast," turn the pitcher over and it reads "Pour Slow."
Seafarer Style: Hand-drawn lettering that nods to ship plaques and dockside signage, the same tradition the phrase itself comes from.
Hand-Painted Heritage: Drawn by Matthew Tabor of Letterset, a Houston studio that still practices traditional sign painting.
Weight: 235g
Material: Food-grade 304 (18/8) stainless steel
Sought after by latte artists around the world, the WPM Latte Art Cup is designed to enhance both the visual and tactile experience of milk-based drinks. At 83.5 grams, its thoughtful form and performance-driven features provides the perfect vessel for those who take their latte art seriously.
Expanded Surface Area
The wide opening offers an ideal canvas for intricate and expressive designs, promoting better integration of espresso and milk foam.
Enhanced Flow Dynamics
A flatter internal base encourages smoother, more controlled pours - ideal for clean lines and well-defined shapes.
Comfortable Handling
Ergonomically shaped to fit securely in your hand, while staying cool to the touch.
Optimized Capacity
8 oz (220 mL) size, ideal for standard lattes and consistent practice.

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
ROUND SPOUT

Lipped round spout for bolder lines, this pitcher is great for thicker lines - slozettas, rosetta revolution, tulips, wing bases with thicker lines, and stacks. This pitcher is great for a higher flow rate. Available in our 10oz and 15oz pitchers
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
Knot Knot x WPM 600cc / 20oz Free Pour Latte Art Competition Pitcher
Regular price $52.00 Save $-52.00The WPM #30 600cc flat top pitcher is a collaborative creation with Bangkok-based barista Knot Knot. This limited edition pitcher is designed for competition, blending WPM's expertise with Knot Knot's artistic touch.
This pitcher focuses on optimizing the commonly available pitcher design - incorporating new elements to functionally improve the common flat top pitcher.
The spout of this flat top pitcher has been redesigned to provide a flow that benefits mix foam use. Excellent for drawing style, its round-bottom design enables a smooth rollover of foam - and latte artists are able to fully utilize every drop of milk for their pours.
At 600cc / 20oz size - this pitcher is perfect for pouring 10oz combination pour style patterns. The lengthened spout at a carefully designed angle works in tandem with a specially designed spout for a controlled flow.
Volume: 600cc/ 20oz
Color: Matte Black
Angled handle for a natural, pencil-like grip
Are you interested in showcasing your drawing style latte art with this pitcher?
Contact and provide us with your drawing style (combo pour / etched pour) latte art portfolio to work with us on product review and testing. Email to support@slowpoursupply.co for more details!
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Hope - 2 pack Latte Art Pitcher Bundle in 10oz + 15oz
Regular price $86.50 Sale price $84.00 Save $2.50Model #26 10oz Round Spout and Model #06 15oz Round Spout
Our popular "Hope" pitcher now has a mini version. This 2 pack bundle features the beloved 15oz "Hope" with round spout, and its sibling "Hope Mini" in round spout.
Available for a limited time!
Product Details:
Round Spout for balanced lines
15oz: Signature WPM slanted top design with 6 oz milk volume indicator
Full Handle for any gripping style
Material: 304 18/8 Stainless Steel. Uncoated, food-safe interior.
Gloss Pink exterior
Wide diameter

Perfect for <6oz cup sizes, these beautiful pitchers are the smallest size in our lineup. Available in both narrow, round and wide spout shape options.

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
ROUND SPOUT

Lipped round spout for bolder lines, this pitcher is great for thicker lines - slozettas, rosetta revolution, tulips, wing bases with thicker lines, and stacks. This pitcher is great for a higher flow rate. Available in our 10oz and 15oz pitchers
DLC 64MM BURRS for ZP-1
Regular price $90.00 Save $-90.00NOT ELIGIBLE FOR DISCOUNT
Elevate your grinding experience with our premium 64mm DLC flat burr replacement, engineered for exceptional performance and unmatched longevity, providing the perfect enhancement for your grinder, ensuring every coffee bean is ground to perfection.
Diamond-Like Carbon (DLC) Coating: Where Durability Meets Efficiency
Experience the Purest Taste in Every Cup
Designed for Durability: Engineered to Last
Note: Please refer to the "Burr change" guide on how to replace the burrs.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Cinder Latte Art Pitcher Bundle - 10oz and 15oz
Regular price $90.50 Sale price $87.75 Save $2.75WPM Cinder Edition 2-Pack Bundle, color named by Morgan Eckroth, is a limited Cinder edition, an ash color with a red hue, offered as a matched 2-pitcher set for baristas who want a cohesive, distinctive kit.
The Cinder 2-Pack is a complete pairing for baristas who want the right pitcher within reach.
Two sizes, one intention
The Cinder 2-Pack pairs the 10 oz and 15 oz in a matched set, covering your most-reached-for cup sizes with the flow control and contrast the WPM line is known for.
What's in the bundle:
1 x 10 oz #26 Cinder, Wide Spout
1 x 15 oz #22 Cinder, Wide Spout
Wide #26 Spout 10 oz
Sized for cups under 6 oz, the 10 oz is the go-to for cortados, gibraltars, and small cappuccinos. Its medium-wide spout delivers a balanced, controlled flow that gives you definition and contrast even in a smaller cup.
Wide #22 Spout 15 oz
The 15 oz is a daily workhorse built for 6 to 8 oz pours. With a 6.3 oz milk volume indicator and a wide spout designed for bold, dramatic flow, it handles high-volume pours with confidence and consistency.
Ergonomic Handle and 304 Stainless Steel
Each pitcher in the bundle is balanced for extended use and comfortable across grip styles, built to hold its shape through daily temperature swings and heavy commercial wear.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz

Perfect for <6oz cup sizes, these beautiful pitchers are the smallest size in our lineup. Available in both narrow, round and wide spout shape options.

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
600cc / 20oz WPM Free Pour Latte Art Competition Pitcher in Matte White
Regular price $50.00 Save $-50.00The WPM #30 600cc flat top
This pitcher focuses on optimizing the commonly available pitcher design - incorporating new elements to functionally improve the common flat top pitcher.
The spout of this flat top pitcher has been redesigned to provide a flow that benefits mix foam use. Excellent for drawing style, its round-bottom design enables a smooth rollover of foam - and latte artists are able to fully utilize every drop of milk for their pours.
At 600cc / 20oz size - this pitcher is perfect for pouring 10oz combination pour style patterns. The lengthened spout at a carefully designed angle works in tandem with a specially designed spout for a controlled flow.
Volume: 600cc/ 20oz
Color: Matte White / Matte Black
Angled handle for a natural, pencil-like grip
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
22oz - Brushed Silver Pitcher with Round Spout by SLOW POUR SUPPLY
Regular price $47.00 Save $-47.00A versatile pitcher that is perfect for both competition and service pours. Great for large to-go cups, as well as milk sharing.
Round spout, perfect for flowing, thicker lines pours
Signature WPM slanted top design with 9.5 oz milk volume indicator
Full Handle for any gripping style
Material: 304 18/8 Stainless Steel. Uncoated, food safe interior.
Brushed Silver
Wide diameter

Our largest size. The 22oz pitcher is perfect for 12-16oz cups. This is the perfect pitcher for milk sharing or to go cup sizes. Available in narrow, and wide (previously categorized as round) options.
ROUND SPOUT

Lipped round spout for bolder lines, this pitcher is great for thicker lines - slozettas, rosetta revolution, tulips, wing bases with thicker lines, and stacks. This pitcher is great for a higher flow rate. Available in our 10oz and 15oz pitchers
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
20oz WPM x KJ Latte Art Pitcher in #67 Competition Spout - Matte Black
Regular price $76.00 Save $-76.00Designed in collaboration with KJ, the 2024 Hong Kong Latte Art Champion and WLAC Semi-Finalist, this pitcher is the newest addition to our #30 Competition Series—crafted for baristas aspiring to elevate their free-pour artistry.
Precision Spout Design
The finely engineered narrow spout delivers unparalleled control, enabling intricate line work and keeping your foam "wet" longer. Perfect for executing sharp, visually striking designs with ease.
Unmatched Stability
Engineered for stability, the fine-tip spout reduces unnecessary hand movement, allowing for smoother, more consistent pours and flawless leaf creation.
Ergonomic and Comfortable
The thoughtfully designed handle offers a secure, ergonomic grip, minimizing hand fatigue. Ideal for extended practice or high-pressure competitions, it ensures comfort with every pour.
Lightweight Yet Durable
With a weight of just 187g and a capacity of 600mL, this pitcher strikes the perfect balance between lightweight usability and long-lasting durability, making it a reliable choice for professionals and enthusiasts alike.
Enhanced Foam Longevity
Keep your foam silky and stable for extended periods, allowing you to focus on crafting intricate designs. Designed to perform best at 60°C, this pitcher ensures your latte art stays crisp and captivating until the final pour.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Matte White
Regular price $53.50 Save $-53.50WPM #21 Milk Pitcher — Blankenburg Edition, named by Kay Cheon, 2025 US Barista Champion A limited matte white edition named after Mark Blankenburg, the beloved milk delivery man behind Dune Coffee Roasters.
Color chosen by Kay Cheon, it is a quiet tribute to the people who make great coffee possible.
#21 Spout 17oz is a natural companion to the 10 oz and 22 oz Blankenburg for a complete bar flow setup.
Pour with definition
The WPM #21 is built for baristas who want crisp, defined lines on medium to large cups. Its protruding round tip and wider vessel make it the go-to choice for 10 to 12 oz pours where precision and contrast matter most.
Slanted Top Design
With dual volume indicators at 6 oz and 7.5 oz, the signature sloped rim gives you the same precise control WPM is known for, scaled for medium cup sizes. Tilt nearly horizontal before milk begins to flow, bringing the spout close to the surface for a gentler, more controlled pour every time.
Round Tip #21 Spout
Designed for defined, high-contrast output, the protruding round tip delivers crisp lines and a more horizontal flow that gives you greater surface coverage and expressive detail on larger canvases.
Ergonomic Handle and 304 Stainless Steel
Balanced for extended use and comfortable across grip styles, the pitcher is built to hold its shape through daily temperature swings and heavy commercial wear.

Perfect for 8-12oz cups, these 17oz pitchers provide a horizontal and intentional flow. The result is a controlled flow enabling high definition and contrast in the cup. Available in tapered sharp, narrow, round tip, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Matte Black
Regular price $53.50 Save $-53.50A round tip latte art pitcher in matte black, built for baristas who want crisp, defined lines on medium to large cups. The 17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Matte Black pairs WPM's #21 protruding round tip spout with a wider vessel, making it a dependable choice for 10 to 12oz pours where precision and contrast matter most.
Built on WPM's signature slanted top design, this edition adds dual milk volume indicators at 6oz and 7.5oz to keep portions consistent across drink sizes. An uncoated 304 (18/8) stainless steel interior and a matte black exterior make it a practical tool for daily service, competition practice, and home bars alike.
– Protruding #21 round tip produces crisp, high-contrast lines with expressive detail.
– More horizontal flow gives greater surface coverage on larger cups.
– Dual volume indicators at 6oz and 7.5oz support consistent milk portioning.
– Signature WPM slanted top lets the spout start close to the crema for a gentler, more controlled pour.
– Wider vessel is sized for 10 to 12oz drinks without excess milk.
– Full ergonomic handle stays comfortable across grip styles during extended service.
– Uncoated 304 (18/8) stainless steel interior is food safe and easy to clean.
– 10 to 12oz milk beverages, including lattes and to-go cups.
– Pours that call for crisp, defined, high-contrast lines.
– Detailed patterns on larger cup surfaces.
– Consistent milk portioning across two drink sizes.
– Café service paired with 10oz and 22oz pitchers for a complete bar flow.
– Home baristas moving up to medium and large cup sizes.
WPM's approach to latte art equipment centers on matching the spout to the pour volume. Slow Pour Supply carries four pitcher sizes for this reason, each paired with a cup range: 10oz for cups under 6oz, 15oz for 6 to 10oz, 17oz for 8 to 12oz, and 22oz for 12 to 16oz. The 17oz size fills the medium to large range, where a pitcher needs enough volume for a full latte without giving up control.
The #21 applies that philosophy to definition. Its protruding round tip shapes the milk stream for crisp lines, while the slanted top and dual volume indicators bring the precise control WPM is known for to medium cup sizes. The 17oz pitcher is offered in several spout profiles, and the round tip is the choice for baristas who prioritize contrast and clean line work on larger canvases.
The #21 spout extends a round tip beyond the rim of the pitcher. This shape is designed for defined, high-contrast output, producing crisp lines rather than soft, diffuse ones. Combined with a more horizontal flow, the round tip gives greater surface coverage and room for expressive detail on larger cups.
The slanted top is original to WPM's pitcher design. It allows the pitcher to tilt nearly horizontal before milk begins to flow, which brings the spout close to the crema surface at the start of the pour. A lower starting point means a gentler initial contact and more control over where the milk lands.
Two milk volume indicators are integrated into the slanted top at 6oz and 7.5oz. They give baristas a visual reference while filling and steaming, which helps standardize milk portions from one drink to the next. Having two marks makes it easier to keep recipes consistent when moving between cup sizes during service.
The 17oz body uses a wider vessel that holds enough milk for 10 to 12oz drinks. Matching vessel size to the cup keeps milk volume appropriate for the pour and limits the amount of steamed milk left over afterward.
The full handle is balanced for extended use and accommodates a range of grip styles. It keeps the pitcher stable from the initial tilt through the final lines, which matters more as milk volume and pitcher weight increase.
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. It is designed to hold its shape through daily temperature swings and heavy commercial use. The interior is left uncoated, keeping it food safe and easy to clean after each shift.
The exterior is finished in matte black for a clean, understated look on the bar. The finish is applied to the exterior only, so the milk contacts uncoated stainless steel.
The 17oz capacity is sized for 8 to 12oz cups and performs best on 10 to 12oz pours. This covers standard lattes and many to-go cups, keeping milk volume matched to the drink.
The protruding round tip delivers crisp, defined lines with a more horizontal flow. Paired with the slanted top, it allows a gentle, controlled start close to the surface, which supports high-contrast patterns with expressive detail across the larger surface of a medium to large cup.
The dual volume indicators make it simple to portion milk consistently during busy service. The 17oz size also pairs naturally with 10oz and 22oz pitchers, giving cafés a complete set that covers small, medium, and large drinks without forcing one pitcher to handle every cup size.
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#21 |
|
SKU |
HC7121BK |
|
Capacity |
17oz |
|
Recommended Cup Size |
8 to 12oz, best suited to 10 to 12oz pours |
|
Spout |
#21 protruding round tip |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicators |
Dual milk volume indicators at 6oz and 7.5oz |
|
Handle |
Full ergonomic handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Matte black |
|
Manufacturer |
WPM |
– 1 x 17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Matte Black.
Wash the pitcher with soap and warm water after every shift, focusing on the interior. Milk contains fats, proteins, and sugars that rinsing alone will not remove, and residue left behind can harden and become difficult to clean. As milk spoils, it becomes more acidic, and prolonged exposure can wear down the protective layer of stainless steel.
After washing, dry the pitcher with a towel and leave it right side up to air out. Proper drying prevents water spots and protects the stainless steel over the long term. Avoid abrasive pads and harsh chemicals to protect the matte black finish.
The 17oz capacity is designed for 8 to 12oz cups and is best suited to 10 to 12oz pours, including lattes and many to-go drinks.
The round tip extends beyond the rim to shape a defined milk stream. It produces crisp, high-contrast lines and a more horizontal flow for greater surface coverage on larger cups.
They are visual references for milk volume while filling and steaming. Using them helps keep portions consistent across drinks and reduces wasted milk.
The slanted top lets you tilt the pitcher nearly horizontal before milk begins to flow. This brings the spout close to the surface for a gentler, more controlled start.
The 17oz fits between WPM's 10oz and 22oz pitchers. Together they cover small, medium, and large cup sizes for a complete bar flow setup.
Wash with soap and warm water after every shift, then towel dry and leave it right side up to air out. Avoid abrasive pads and harsh chemicals to protect the finish.
The 17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Matte Black brings WPM's slanted top and #21 protruding round tip to medium and large cups. With crisp, defined lines, dual volume indicators, and durable 304 stainless steel construction, it gives baristas a precise, dependable tool for high-contrast pours in daily service and practice.

Perfect for 8-12oz cups, these 17oz pitchers provide a horizontal and intentional flow. The result is a controlled flow enabling high definition and contrast in the cup. Available in tapered sharp, narrow, round tip, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
15oz SLOW POUR SUPPLY® X WPM PITCHER with Wide Spout in Cinder
Regular price $49.25 Save $-49.25The 15oz Slow Pour Supply® × WPM Pitcher with Wide Spout in Cinder is built for baristas who want bold, high-contrast latte art without slowing down service. It pairs WPM's #22 pitcher body with the Slow Pour Supply Signature Spout, the widest spout in the Slow Pour lineup. The result is a fast, natural flow that lays down thick, confident lines in 6 to 10oz cups.
Finished in Cinder, a matte gray powder coat with a subtle red hue, this edition combines an uncoated 304 (18/8) stainless steel interior with a durable exterior made for daily café use. A 6oz milk volume indicator keeps portions consistent from drink to drink, and the #22 carries a name given by 2022 US Barista Champion Morgan Eckroth.
- The Slow Pour Supply Signature Spout, the widest in the Slow Pour lineup, produces bold, dramatic lines.
- A very high flow rate keeps service pours fast without sacrificing definition.
- The 15oz capacity is sized for 6 to 10oz cups, including cappuccinos, flat whites, and small lattes.
- The signature WPM slanted top brings the spout closer to the crema, reducing the tilt needed to start a pour.
- A 6oz milk volume indicator provides a visual reference for consistent portioning.
- The wide body diameter gives milk room to circulate during steaming for smoother microfoam.
- The full handle supports any grip style and keeps the pitcher stable through the pour.
- The matte Cinder powder coat sits over an uncoated, food-safe stainless steel interior.
- 6 to 10oz milk beverages such as cappuccinos, flat whites, and small lattes.
- Fast service pours during busy café shifts.
- Wing base tulips, rosettas, stacks, and framed patterns.
- Latte art throwdowns that reward bold, high-contrast lines.
- Replacing a traditional 12oz pitcher with a more horizontal flow.
- Home baristas developing confident, high-flow pouring technique.
This pitcher is part of the Slow Pour Supply® × WPM line, which pairs WPM's pitcher bodies with spout profiles exclusive to Slow Pour Supply, a distributor of latte art and brewing equipment that has supported the coffee community since 2018. Model #22 carries the Slow Pour Supply Signature Spout. This wide spout is available only on Slow Pour's 22oz Wide Spout pitchers and the 15oz Rowan, Cinder, Periwinkle, and Creamsicle editions.
The collaboration is built around matching pitcher size to cup size. Slow Pour Supply offers four WPM pitcher sizes, each paired with a specific cup range: 10oz for cups under 6oz, 15oz for 6 to 10oz, 17oz for 8 to 12oz, and 22oz for 12 to 16oz. Slow Pour positions the 15oz #22 as a replacement for traditional 12oz pitchers, offering a more horizontal flow that makes the first contact with the crema less abrupt.
The #22 was named by Morgan Eckroth, the 2022 US Barista Champion and runner-up at the 2022 World Barista Championship in Melbourne. Slow Pour Supply WPM pitchers have accompanied national latte art champions, barista champions, and Coffeefest Latte Art World Championship Open winners on the competition stage.
The Signature Spout is the widest spout Slow Pour Supply offers, designed for a dramatic yet natural flow with a very high flow rate. A wider opening releases more milk at a given tilt, which lets baristas lay down thick, high-contrast lines and fill the cup quickly. Compared with Slow Pour's regular round spout, it favors bold definition over narrow, fine detail, making it a strong fit for service pours and framed patterns.
The slanted top is original to WPM's pitcher design and angles the milk stream toward the crema sooner. This reduces how far the pitcher must tilt before milk begins to flow, so the spout can sit closer to the surface for better contrast. Paired with the high-flow Signature Spout, the slanted top helps keep the start of each pour controlled.
A 6oz milk volume indicator gives baristas a visual reference while filling and steaming. It helps standardize milk portions across drinks, reducing waste and keeping recipes consistent. For cafés serving 6 to 8oz drinks, the indicator makes it easy to steam the right amount of milk every time.
The wide body gives steaming milk more room to circulate. Better movement during texturing supports smoother, more even microfoam, which carries through to cleaner lines in the cup.
The full handle accommodates a wide range of grip styles. It keeps the pitcher stable from the initial tilt through the final finishing lines, which matters when working with a fast-flowing spout.
Cinder is an ash gray tone with a subtle red hue, applied as a matte powder coat to the exterior. The coating gives the pitcher a distinctive look on the bar while holding up to daily handling. It is applied to the exterior only, so it never comes into contact with milk.
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. The interior is left uncoated, keeping it food safe and easy to clean after each use.
The 15oz capacity is sized for 6 to 10oz cups, which covers cappuccinos, flat whites, and small lattes. Matching pitcher size to cup size keeps milk volume appropriate for the drink and avoids steaming far more milk than the pour requires.
The Signature Spout delivers a fast, natural flow that favors bold, flowing lines over very fine detail. Combined with the slanted top and the pitcher's more horizontal flow, it supports wing base tulips, rosettas, stacks, and framed patterns with thick, high-contrast lines.
A high flow rate shortens pour time, which keeps the bar moving during busy periods without sacrificing presentation. The 6oz volume indicator adds consistency to steaming, so each drink starts from the same milk portion.
The predictable, high-flow stream suits throwdowns and routines built around bold patterns. Baristas who train on the #22 during service can carry the same feel to the stage, where Slow Pour Supply WPM pitchers already have a strong competition record.
|
Specification |
Details |
|
Brand |
WPM |
|
Collaboration |
Slow Pour Supply® × WPM |
|
Model |
#22 |
|
Capacity |
15oz |
|
Recommended Cup Size |
6 to 10oz |
|
Spout |
Slow Pour Supply Signature Spout (wide) |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicator |
6oz milk volume indicator |
|
Body |
Wide diameter |
|
Handle |
Full handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Matte gray powder coat (Cinder) |
|
Pitcher Named By |
Morgan Eckroth |
|
Manufacturer |
WPM |
- 1 x 15oz Slow Pour Supply® × WPM Pitcher with Wide Spout in Cinder.
Wash the pitcher with soap and warm water after every shift, focusing on the interior. Milk contains fats, proteins, and sugars that rinsing alone cannot remove, and this residue can harden over time. As milk spoils, lactose ferments into lactic acid, which can slowly wear down the protective layer of stainless steel.
After washing, dry the pitcher with a towel and leave it right side up to air out. Water left on the surface can cause spots and may encourage corrosion over the long term. Avoid abrasive pads and prolonged soaking to protect the matte Cinder finish.
The 15oz capacity is designed for 6 to 10oz cups, making it well suited to cappuccinos, flat whites, and small lattes.
The Signature Spout is Slow Pour Supply's widest spout. It produces a higher flow rate and bolder lines than Slow Pour's regular round spout, trading some fine detail for speed and contrast.
The fast, natural flow suits wing base tulips, rosettas, stacks, and framed patterns. It works best for designs built on thick, high-contrast lines.
It gives a visual reference for how much milk is in the pitcher while filling and steaming. This keeps portions consistent and reduces milk waste.
The #22 was named by Morgan Eckroth, the 2022 US Barista Champion and 2022 World Barista Championship runner-up.
Wash with soap and warm water after every shift, focusing on the interior. Dry with a towel and leave it right side up to air out.
The 15oz Slow Pour Supply® × WPM Pitcher with Wide Spout in Cinder brings the widest spout in the Slow Pour lineup to a pitcher sized for 6 to 10oz cups. With a high-flow Signature Spout, a 6oz volume indicator, and a wide body for smooth steaming, it gives baristas a dependable tool for bold lines in both daily service and competition.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
WIDE SPOUT

The Wide Spout is known for its dramatic yet very natural flow. Available only on our 22oz Wide Spout, 15oz Rowan, Cinder, Periwinkle, Creamsicle. This versatile pitcher can achieve very bold lines, and is the perfect pitcher for service pours. Great for wing based tulips and rosetta revolution, this pitcher is also great for stacks, and any framed patterns. A pitcher with a very high flow rate.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
15OZ SLOW POUR SUPPLY® X WPM Monochrome Handleless Latte Art Pitcher with Soft Touch Silicone Wrap
Regular price $59.75 Save $-59.75A Blend of Contemporary and Functionality
Step up your coffee game with our latest innovation: the Monochrome Handleless Milk Pitcher line. This sleek and stylish pitcher combines modern design elements with exceptional functionality, making it an essential tool for baristas and coffee enthusiasts alike.
Now available in beautiful new packaging!
Round Spout: Prepare to create bold, dramatic patterns and pour with lightning-fast precision. Our round spout is specifically engineered to deliver bold and contrasting latte art patterns and ensure rapid service pours. Best for tulips, bold rosettas, hearts and fast pouring styles
Monochrome Color: Choose sophistication with our Model #14 in #06 Spout. This 15oz handleless pitcher features a monochrome color scheme, adding a touch of understated elegance to your coffee station. It's a statement piece that speaks volumes about your dedication to quality and style.
Signature WPM Design: Our handleless pitcher features the WPM original, unique slanted top design, setting it apart from traditional milk pitchers. This distinctive shape not only adds visual appeal but also provides a ideal flow dynamics. The ergonomic grip, ensuring comfort and precision while pouring. It's innovation you can feel.
Premium Materials: Crafted from 304 18/8 stainless steel, our pitcher guarantees durability and longevity. The uncoated, food-safe interior ensures the purity of your milk, maintaining its quality without compromising taste.
Patterned Silicone Wrap: We understand the importance of a secure grip. That's why our handleless pitcher comes with a patterned silicone wrap that not only adds a touch of contemporary flair but also provides a comfortable and slip-resistant hold. Your hands will thank you.
Wide Diameter: Designed with a wide diameter, our pitcher accommodates frothing skill from beginner to professional - a wider diameter also ensure realistic assessment of foam distribution.
Stunning Colors: Our handleless milk pitcher is available in four captivating colors: Marigold, Marina Blue, Aubergine, and Matte White. Whether you prefer a vibrant pop or a minimalist aesthetic, we have a shade to match your personal style. Elevate your coffee setup with a touch of visual brilliance.
6oz Milk Volume Indicator: Achieve precision in your measurements with the WPM signature slanted top design, featuring a convenient 6oz milk volume indicator. No more guessing games or wasted milk. This pitcher is designed to enhance your workflow and make every pour count.
Upgrade your coffee experience with the New Monochrome Handleless Milk Pitcher, where innovation meets beauty. Embrace the art of pouring with confidence, and indulge in the seamless fusion of style and functionality.
Slow Pour Supply - we speak pitchers like nobody else
*please note that the Matte White version comes in past version black packaging
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
ROUND SPOUT

Lipped round spout for bolder lines, this pitcher is great for thicker lines - slozettas, rosetta revolution, tulips, wing bases with thicker lines, and stacks. This pitcher is great for a higher flow rate. Available in our 10oz and 15oz pitchers
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in Moss Green "ROWAN"
Regular price $49.50 Save $-49.50The 15oz Slow Pour Supply® x WPM Latte Art Pitcher with Wide Spout in Moss Green "Rowan" is built for baristas who want bold, confident lines without sacrificing control. Its Model #22 Slow Pour Supply Signature Spout delivers a high, natural flow that suits busy service pours and dramatic, thick-line patterns in 6 to 10oz cups.
The Rowan is finished in a matte moss green inspired by evergreen mountains and hiking trails. It takes its name from the rowan, the wayfarer’s tree, long associated with protecting travelers and guiding them wherever they are going.
– Slow Pour Supply’s widest 15oz spout produces dramatic, bold lines with a very natural flow.
– High flow rate keeps service pours fast and consistent during busy periods.
– Sized for 6 to 10oz cups, including cappuccinos and small lattes.
– Built-in 6oz milk volume indicator helps standardize milk portions drink after drink.
– Signature WPM slanted top reduces the tilt needed to begin a pour.
– Wide body diameter gives milk room to circulate for smoother microfoam.
– Matte moss green powder coat over an uncoated, food-safe stainless steel interior.
– 6 to 10oz milk beverages.
– Fast, consistent café service pours.
– Wing base tulips and rosetta revolutions.
– Stacks and framed patterns built on thicker lines.
– Throwdowns and practice sessions focused on bold, high-contrast art.
The Rowan is part of Slow Pour Supply’s ongoing collaboration with WPM, pairing WPM’s pitcher manufacturing with spout and size combinations selected by Slow Pour Supply for specialty cup sizes. The Model #22 Signature Spout sits alongside the Periwinkle, Cinder, and Creamsicle editions, and Slow Pour Supply describes this wide spout and 15oz pairing as its most popular spout-size combination for service pours and throwdowns.
Slow Pour Supply WPM pitchers are used from neighborhood cafés to national competitions, and they have accompanied National Latte Art Champions, Barista Champions, and Coffeefest Latte Art World Championship Open winners on stage. The Rowan carries that same proven spout in a new colorway, named by Fernando Hernandez.
The Model #22 Signature Spout is the widest spout Slow Pour Supply offers on a 15oz pitcher, sharing the same spout shape as the popular Periwinkle. Its broad opening releases milk at a high but natural rate, letting baristas lay down thick, defined lines with less effort. This makes it well suited to bold patterns and to service pours where speed and consistency matter.
The slanted top is original to WPM’s pitcher design and angles the milk stream toward the crema sooner. Less tilt is needed before milk begins to flow, so the spout can sit closer to the surface for cleaner contact and better definition. On a 15oz pitcher, this supports a more horizontal flow and a less drastic initial contact with the cup.
A 6oz milk volume indicator gives baristas a clear visual reference while filling and steaming. Consistent fill levels lead to consistent texture and pour volume, which reduces waste and keeps drinks uniform across a shift.
The wide body gives steaming milk more room to circulate. Better movement during texturing supports smoother, more even microfoam, which translates into cleaner lines and better contrast in the cup.
The full handle accommodates any gripping style. It keeps the pitcher stable through the entire pour, from the initial tilt to the final finishing line.
The exterior is finished with a matte moss green powder coating and a laser-etched "SLOW POUR X WPM" logo. The coating is applied to the exterior only, so it never comes into contact with milk.
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. The interior is left uncoated, keeping it food safe and easy to clean after each use.
Slow Pour Supply matches each pitcher size to a specific cup range, and the 15oz pitcher is designed for 6 to 10oz cups. Paired with the 6oz milk volume indicator, it is especially well matched to 6 to 8oz drinks, replacing a traditional 12oz pitcher with one that offers a more horizontal flow.
The wide spout delivers a high, natural flow that favors bold, flowing lines over very fine detail. Combined with the slanted top, it supports wing base tulips, rosetta revolutions, stacks, and framed patterns with thick, high-contrast lines.
A faster flow shortens pour time without making the stream hard to manage, which helps keep the bar moving during peak hours. The volume indicator and wide body support repeatable steaming, so each drink starts from the same milk quantity and texture.
The Model #22 wide spout and 15oz combination is popular for throwdowns, where bold, quickly executed patterns stand out. Baristas who train on it during service can carry the same familiar flow into competition settings.
|
Specification |
Details |
|
Brand |
Slow Pour Supply® x WPM |
|
Model |
#22 |
|
SKU |
7122ROWAN |
|
Capacity |
15oz |
|
Recommended Cup Size |
6 to 10oz |
|
Spout |
Slow Pour Supply Signature Wide Spout (same spout shape as Periwinkle) |
|
Flow Rate |
High |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicator |
6oz milk volume indicator |
|
Body |
Wide diameter |
|
Handle |
Full handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Matte moss green powder coating |
|
Branding |
Laser-etched "SLOW POUR X WPM" logo |
|
Manufacturer |
WPM |
– 1 x 15oz Slow Pour Supply® x WPM Latte Art Pitcher with Wide Spout in Moss Green "Rowan."
Wash the pitcher with warm water and soap after every shift, focusing on the interior where milk residue collects. Dry it thoroughly with a soft cloth, since proper drying extends the life of stainless steel kitchenware. Avoid abrasive pads, harsh chemicals, or prolonged soaking to protect the matte powder coated finish.
The 15oz pitcher is designed for 6 to 10oz cups and includes a 6oz milk volume indicator, making it a natural fit for cappuccinos and small lattes.
The wide spout is Slow Pour Supply’s widest option at 15oz and produces a high, natural flow for bold, thick lines. Round and narrow spouts deliver a more restrained flow suited to finer detail work.
Yes. The Rowan uses the same Model #22 Signature Spout shape as the Periwinkle, as well as the Cinder and Creamsicle editions. The difference is the matte moss green finish.
It excels at wing base tulips, rosetta revolutions, stacks, and framed patterns, along with any design built on bold, high-contrast lines.
Wash with warm water and soap, then dry thoroughly with a soft cloth. Avoid abrasive pads, harsh chemicals, and prolonged soaking to protect both the stainless steel interior and the powder coated exterior.
The 15oz Slow Pour Supply® x WPM Latte Art Pitcher with Wide Spout in Moss Green "Rowan" brings Slow Pour Supply’s most popular service spout to a calm, trail-inspired colorway. With a high, natural flow, a 6oz volume indicator, and WPM’s signature slanted top, it gives baristas a dependable tool for bold lines in daily service, practice, and throwdowns.

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
WIDE SPOUT

The Wide Spout is known for its dramatic yet very natural flow. Available only on our 22oz Wide Spout, 15oz Rowan, Cinder, Periwinkle, Creamsicle. This versatile pitcher can achieve very bold lines, and is the perfect pitcher for service pours. Great for wing based tulips and rosetta revolution, this pitcher is also great for stacks, and any framed patterns. A pitcher with a very high flow rate.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in Creamsicle
Regular price $49.25 Save $-49.25The 15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in Creamsicle is built for baristas who want a fast, natural flow for bold, high-contrast latte art. It pairs Slow Pour Supply's signature Model #22 wide spout with WPM's slanted top and wide-diameter body, a spout and size combination that has become a favorite for service pours and latte art throwdowns.
Released as a 2024 colorway, Creamsicle features a summer-like pastel peach exterior over an uncoated, food-safe 304 (18/8) stainless steel interior. A 6oz milk volume indicator and a full handle complete a pitcher designed for consistent results from the morning rush to the competition stage.
– Slow Pour Supply's widest spout produces bold, dramatic lines with a fast, natural flow.
– Shares the same Model #22 spout shape as the popular Periwinkle, Rowan, and Cinder pitchers.
– 15oz capacity is matched to 6 to 10oz cups, Slow Pour Supply's most popular pitcher size.
– 6oz milk volume indicator helps keep milk portions consistent from drink to drink.
– Signature WPM slanted top creates a more horizontal flow and a gentler first contact with the crema.
– Wide body diameter gives milk room to circulate during steaming.
– Full handle supports any grip style for stable, repeatable pours.
– Pastel peach Creamsicle exterior with a laser-etched "SLOW POUR X WPM" logo.
– 6 to 10oz milk beverages, with 6 to 8oz cups as the sweet spot.
– High-volume café service pours.
– Latte art throwdowns and competition practice.
– Tulips, wing base tulips, and rosetta revolutions.
– Stacks and framed patterns that call for thick, confident lines.
– Replacing a traditional 12oz pitcher for a more horizontal pouring angle.
Slow Pour Supply has supported the specialty coffee community since 2018 as a distributor of latte art pitchers and brewing equipment. Its collaboration with WPM pairs WPM's established pitcher bodies and signature slanted top with Slow Pour Supply's own spout profiles, colorways, and branding.
The Model #22 Slow Pour Supply Signature Wide Spout sits at the center of that partnership. It is available only on the 15oz Rowan, Cinder, Periwinkle, and Creamsicle pitchers and on Slow Pour Supply's 22oz wide spout pitcher. According to Slow Pour Supply, this spout and size combination is its most tried and tested for service pours and throwdowns, and it has accompanied many baristas to wins at the Coffee Fest Latte Art Championship Open. Creamsicle brings that same spout to a pastel peach colorway released in 2024.
The wide spout is the widest profile in Slow Pour Supply's pitcher lineup and shares the same spout shape as the Periwinkle pitcher. It produces a very high flow rate that still feels natural in the hand, letting baristas lay down bold, dramatic lines without forcing the pour. That combination makes it equally useful for quick service pours and for patterns built on thick, well-defined layers.
The slanted top is a defining detail of WPM's pitcher design. It angles the milk stream toward the cup sooner, producing a more horizontal flow and a less drastic initial contact with the crema. A gentler start helps the milk sit on the surface rather than diving beneath it, which gives the finished pattern more contrast and higher color definition.
A 6oz milk volume indicator gives a clear visual reference while filling and steaming. It helps standardize milk portions across drinks, which reduces waste and keeps recipes consistent during service. For baristas training on patterns, a repeatable milk volume also removes one variable from practice.
The wide body gives milk more room to move while steaming. Better circulation during texturing supports smoother, more even microfoam, and it also makes it easier to see how foam is distributed before the pour begins.
The full handle accommodates any gripping style, from a relaxed hold to a firm, controlled grip. It keeps the pitcher stable from the initial tilt through the final finishing line, which matters when a fast-flowing spout leaves little room for hesitation.
Creamsicle is finished in a summer-like pastel peach, giving the pitcher a distinctive presence on the bar or the competition stage. The color is applied to the exterior only, so the interior that holds milk remains bare stainless steel.
A laser-etched "SLOW POUR X WPM" logo identifies the pitcher as part of the collaboration. Etching marks the surface directly rather than adding a printed layer that can wear with handling.
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. The interior is left uncoated, keeping it food safe and easy to clean after every shift.
Slow Pour Supply recommends its 15oz pitchers for 6 to 10oz cups, and it notes that this size is especially well suited to 6 to 8oz drinks. Matching pitcher size to cup size keeps milk volume appropriate for the drink and avoids steaming far more milk than the pour requires. The 15oz is Slow Pour Supply's most popular size.
The wide spout delivers a dramatic yet natural, high-volume flow that favors bold lines over very fine detail. Combined with the slanted top, it supports tulips, wing base tulips, rosetta revolutions, stacks, and framed patterns with clean, thick definition. Baristas who want delicate, fine lines may prefer a narrow spout profile instead.
A faster flow shortens pour time, which keeps tickets moving during busy service without giving up presentation. The 6oz volume indicator supports consistent portioning, so each drink starts from the same amount of milk.
The Model #22 wide spout is one of Slow Pour Supply's go-to choices for throwdowns, and Slow Pour Supply reports that it has accompanied many winners of the Coffee Fest Latte Art Championship Open. Its predictable, high-flow stream suits routines built around bold patterns, and baristas who train on it during service can carry the same feel to the stage.
|
Specification |
Details |
|
Brand |
SLOW POUR SUPPLY® x WPM |
|
Model |
#22 |
|
Capacity |
15oz |
|
Recommended Cup Size |
6 to 10oz |
|
Spout |
Slow Pour Supply Signature Wide Spout |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicator |
6oz milk volume indicator |
|
Body |
Wide diameter |
|
Handle |
Full handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Creamsicle pastel peach |
|
Branding |
Laser-etched "SLOW POUR X WPM" logo |
|
Colorway Release |
2024 |
|
SKU |
7122PF |
|
Manufacturer |
WPM |
– 1 x 15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in Creamsicle.
Wash the pitcher with warm water and soap after every shift, focusing on the interior. Milk contains fats, proteins, and sugars that can leave residue when only rinsed with water, and that residue can harden over time. As milk spoils, lactose ferments into lactic acid, which can gradually wear down the protective layer of stainless steel.
After washing, dry the pitcher with a towel and leave it right side up to air out. Water left on stainless steel can cause water spots and may encourage corrosion over the long term. Avoid abrasive pads and harsh chemicals to protect the Creamsicle exterior finish.
The 15oz capacity is designed for 6 to 10oz cups, and Slow Pour Supply notes that it is especially well suited to 6 to 8oz drinks.
Yes. Creamsicle uses the same Model #22 Slow Pour Supply Signature Wide Spout shape as Periwinkle, Rowan, and Cinder. The pitchers differ in colorway, not in pouring performance.
The wide spout is Slow Pour Supply's widest profile and produces a higher flow rate than its regular round spout. That extra flow makes it easier to lay down bold, dramatic lines and to finish service pours quickly.
The fast, natural flow suits tulips, wing base tulips, rosetta revolutions, stacks, and framed patterns. It favors bold, thick lines over very fine detail work.
Colors can appear slightly different depending on your screen and the lighting at the time a photo was taken. The Creamsicle finish may also look warmer or cooler under different light sources, such as fluorescent or warm-toned bulbs.
Wash with warm water and soap after every shift, focusing on the interior, then dry with a towel and leave it right side up to air out.
The 15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in Creamsicle brings Slow Pour Supply's signature wide spout and WPM's slanted top together in a bright 2024 colorway. With a fast, natural flow, a 6oz volume indicator, and a wide body for smooth steaming, it gives baristas a dependable tool for bold service pours, throwdowns, and competition practice.

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
WIDE SPOUT

The Wide Spout is known for its dramatic yet very natural flow. Available only on our 22oz Wide Spout, 15oz Rowan, Cinder, Periwinkle, Creamsicle. This versatile pitcher can achieve very bold lines, and is the perfect pitcher for service pours. Great for wing based tulips and rosetta revolution, this pitcher is also great for stacks, and any framed patterns. A pitcher with a very high flow rate.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in "Periwinkle"
Regular price $49.50 Save $-49.50Model #22 15oz Slow Pour Supply Signature Spout
A wider spout makes this a versatile pitcher for dramatic bold lines and service pours.
Our widest spout for dramatic bold lines - swipe to the last photo to see comparison between Periwinkle and our regular round spout.
Signature WPM slanted top design with 6 oz milk volume indicator
Full Handle for any gripping style
Material: 304 18/8 Stainless Steel. Uncoated, food safe interior. Matte blue powder coated exterior.
Wide diameter

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
WIDE SPOUT

The Wide Spout is known for its dramatic yet very natural flow. Available only on our 22oz Wide Spout, 15oz Rowan, Cinder, Periwinkle, Creamsicle. This versatile pitcher can achieve very bold lines, and is the perfect pitcher for service pours. Great for wing based tulips and rosetta revolution, this pitcher is also great for stacks, and any framed patterns. A pitcher with a very high flow rate.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
15oz Latte Art Pitcher with Round Spout in Matte White
Regular price $45.25 Save $-45.25A Matte White "Blankenburg" version designed by Kay Cheon (2025 US Barista Champion). This Milk Pitcher was named after Dune Coffee Roaster's milk delivery man Mark Blenkenburg.
Read the story below in the dropdown menu!
Get consistent and contrasting latte art with the WPM #06 slanted spout pitcher, a popular choice among latte art competitors and professional baristas. This pitcher’s signature design, featuring WPM’s original slanted top and round “#06” spout - is internationally acclaimed for giving baristas unparalleled control and precision. Its well-researched spout support consistent, precise pours with ease, helping you create latte art that truly pops with contrast.
Product Features
· Original Slanted Top Design: Patented WPM slanted rim provides the perfect pouring angle for unparalleled flow control. It apart from traditional pitchers, making it easier to get close to the surface for fine latte art details.
· Round #06 Spout: The rounded spout is barista-engineered for bold lines and smooth pours, ideal for creating hearts, rosettas, tulips, and other patterns with high contrast.
· It delivers a controlled, medium width for crisp latte art lines.
· 6 oz Volume Indicator: An internal scale at 6 oz helps measure milk precisely for 6–8 oz drinks. This ensures consistency in milk-to-espresso ratio and texture: a critical factor for latte art quality.
· Ergonomic Full Handle: Designed for comfort and stability, the pitcher’s handle allows any grip style and steady control during pours. The pitcher feels balanced in hand, reducing fatigue during repeated use.
· Durable Stainless Steel Build: Crafted from food-grade 304 stainless steel, the WPM pitcher is built to last. Its robust construction maintains the spout shape and resists dings or warping, so you can rely on precise performance over time.
Trusted by Baristas and Champions
WPM pitchers are trusted by baristas worldwide, from local cafés to international competitions, spotted on stage with National Latte Art Champions and World Latte Art Championship winners, prized for their superior flow control.
The #06 spout model is a favorite in the latte art community, often described as a game changer by those who have upgraded to it. It is a versatile spout elevates the quality and definition of latte art for everyday baristas and champions alike.
Patterns it is prized for: medium line width rosetta, tulips, ripple heart, solid heart, stacks, swans and wing base tulips
Optimal Flow with Signature Slanted Top
One defining feature of WPM pitchers is their original slanted top design. Developed with service pours style in mind, this sloped pitcher rim creates a defined exit angle for the milk, resulting in better flow control during pouring. The upward-sloped spout lets you tilt the pitcher more horizontally before the milk starts to flow. This means you can bring the spout very close (~1 cm) to the espresso surface without spilling, a crucial technique for creating a defined base. By making it easier to position the spout low and level, the WPM #06 pitcher gives you greater control over the pour rate and direction – helping you effortlessly pour intricate patterns with smooth, consistent strokes.
WPM’s slanted top encourages a more horizontal pour, leading to a less abrupt initial contact of milk and espresso. This technique accentuates the distinction between the crema and the milk foam, yielding latte art with brighter whites and deeper contrast.
Enhanced Contrast in Latte Art with Expertly Designed Spout
Not all spouts are the same. The round #06 spout on this pitcher is expertly designed by professional latte artist. The #06 spout produces medium line width, high-contrast patterns. Its flow dynamics promote a gentle, even integration of milk and espresso, preventing over-mixing.
In other words, hearts, rosettas, and tulips poured with the #06 spout pitcher tend to have crisp, well-defined lines, making your latte art really stand out. Whether you’re pouring a symmetrical tulip or an elaborate free-pour design, the WPM #06 pitcher helps ensure your art is vivid and eye-catching.
Precision Volume Indicator for Consistency
Consistency is key to perfecting your pours, and the WPM #06 pitcher makes it easier with a built-in 6 oz milk volume indicator. This handy marking inside the pitcher helps you measure the optimal milk volume every time. The 15 oz (450 mL) pitcher size is geared toward 6–8 oz cups, which are common for lattes and cappuccinos.
By filling to the 6 oz line, you have the ideal amount of milk for an 8 oz drink, reducing waste and ensuring repeatable results with each serving. This feature is especially useful in busy café settings or during competitions, as it removes guesswork - you can steam the same volume of milk consistently, leading to uniform texture and temperature for your latte art canvases. The volume marker, combined with the pitcher’s excellent pouring control, means you can focus on your art without worrying about uneven milk amounts.
Designed for Comfort and Durability
Beyond its performance in the cup, the WPM #06 pitcher is built with barista comfort and durability in mind. It sports a full ergonomic handle that accommodates various gripping styles, allowing you to pour with comfort and stability. The balanced weight and thoughtful design reduce wrist strain, even during extended use.
Importantly, WPM constructs these pitchers from high-grade 304 18/8 stainless steel, ensuring they are rust-resistant and long-lasting. This sturdy build means the pitcher retains its shape (and that precise spout geometry) over time, even with daily use and temperature fluctuations. The slanted top design isn’t just about looks – it’s a result of extensive engineering and barista feedback, culminating in a pitcher that provides ideal flow dynamics. In short, the WPM #06 pitcher marries form and function: it’s tough enough for commercial environments yet refined enough to give you an edge in the art of pouring.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
ROUND SPOUT

Lipped round spout for bolder lines, this pitcher is great for thicker lines - slozettas, rosetta revolution, tulips, wing bases with thicker lines, and stacks. This pitcher is great for a higher flow rate. Available in our 10oz and 15oz pitchers
| Item | Price | Qty | Total | |
|---|---|---|---|---|
|
KIMERA 450 Tri-Spout Latte Art Pitcher
Color: Matte Pink
|
$80.00 | 1 |
$80.00
|
| Subtotal |
$80.00 |
|||
| Shipping | ||||
| Total | ||||