DragonFly Design Center CT62 Transit Pro Dripper 02 (390ml)
Regular price $95.75 Save $-95.75A 62° conical dripper sized for 1- 4 cup, with an internal groove structure that keeps the drawdown steady at larger doses
The CT62 Dripper 02 (390ml) from DragonFly Design Center is a new bone china conical dripper made for a larger, 1-4 cup brew. It carries the 62° angle, internal grooves, and exterior texture of the original CT62, with a taller body that raises capacity from 1 to 2 servings to 1 to 4. It is available in Black and White.

The cone is set at 62°, a proprietary angle DragonFly developed to give a broad, stable extraction range. It responds well to a centered pour or a wider circular spiral pour, so you can adjust your technique without the brew losing balance.
Inside, 24 grooves guide water down the wall. Instead of the raised ribs found in many conical drippers, the CT62 uses recessed channels, with an added ring of horizontal grooves near the base to regulate flow through the lower part of the cone.
DragonFly refined this channel design through repeated testing. The goal is a drawdown that holds a consistent pace from start to finish, which helps reduce clogging and the bitterness, astringency, and sourness that come with uneven extraction.
Set the DragonFly Design Center CT62 Transit Pro Dripper 02 (390ml) and you have instantly transformed it to a hybrid brewer with variable flow rate.
The dripper sits over a cup or server for standard pour over brewing. At 390ml, it handles 1 to 4 servings, so the same brewer works for a single morning cup or a shared pot. It takes 1-4 cup paper filters.
Its base has an integrated raised ring that seats into the DragonFly Conical Dripper Transit Base. It also pairs with the DragonFly Conical Dripper Holder and Silicone Ring for a more secure, stable setup on the brew table.
The new bone china body is heat resistant to 120°C (248°F) and safe for dishwashers, microwave ovens, and dish dryers.
• 62° conical geometry: A proprietary angle that gives a wide working range and room to vary pour style.
• 24 recessed channels: Guide water downward along the wall in place of raised ribs, for a steadier drawdown.
• Horizontal groove ring: Sits near the base and regulates flow through the lower cone as the bed settles.

The CT in the DragonFly CT62 refers to its exterior texture, based on Shanwen armor (Shanwen Jia) from China's Tang Dynasty. The 62 refers to the interior cone angle.
The Shanwen design is an original concept from medieval China that takes a flat pattern and builds it directly into a three-dimensional form. DragonFly Design Center brought that approach to the dripper as a contemporary geometric exterior: curved surfaces and facets cover the full body, and the geometry repeats across it, giving the surface depth and perspective from any angle.
The built-in stand follows the same Shanwen Jia pattern, with one corner extended to form the handle, so the dripper and stand carry one visual language.

• Dripper: DragonFly CT62 Dripper 02 (390ml) x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
CT62 Dripper 02 (390ml) |
|
Weight |
250g net (415g gross, packaged) |
|
Dimensions |
119mm top diameter x 34mm bottom diameter x 92mm height |
|
Material |
New bone china (新骨瓷), matte glaze finish |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
Made in China |
|
Capacity |
390ml, 1 to 4 servings |
|
Filter |
V60 size 02, Sibarist Cone M, HIFLUX Folding V 02, ORIGAMI Cup4 paper filter |
|
Heat Resistance |
Up to 120°C (248°F) |
|
Cone Angle |
62° |
|
Internal Structure |
24 grooves, recessed channels, horizontal groove ring near the base |
|
Designer |
Jeff Shi |
|
Compatible Accessories |
DragonFly Conical Dripper Transit Base · DragonFly Conical Dripper Holder and Silicone Ring |
|
Color |
Black, White |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
DragonFly Tri-Spin FS Flat Transit – Flat-Bottom Variable Flow Hybrid Brewer with Transit Base, 280ml
Regular price $90.00 Save $-90.00The DragonFly Tri-Spin FS Flat Transit is a hybrid brewer built from four distinct design choices working together: a turning transit base, a ribbed flat-bottom interior, a three-point hollow base, and a woven ceramic exterior. Each does a different job, from managing brew style to keeping water flowing evenly through the grounds.
The Transit Base sits beneath the ceramic dripper and controls the outflow with a turning knob. With the knob open, it brews like a fast-flowing flat-bottom pour over and gives a filter-style cup. With the knob closed, water stays in contact with the grounds for as long as you choose. This gives a more evenly extracted, immersion-led cup. You can also choose to variate the flow rate and explore the recipe that works best for your coffee.
The Tri-Spin FS Flat Transit belongs to DragonFly's Tri-Spin series, also known by its Chinese name Xuanwu (玄武), after the mythological figure represented in the dripper's design language. The model was named a winner of the German Design Award 2026, recognized alongside other DragonFly coffee pieces for combining extraction control with a distinct visual identity.
DragonFly Design was founded in 1996 in Taipei by Jeff Dayu Shi [石 大宇], who has spent much of his career working with bamboo and other traditional Chinese materials. The International Bamboo and Rattan Organization named him one of its 100 Heroes of China's Bamboo Industry for that work, and his designs have won the German Design Award, Red Dot, and iF Design Award, among others. That same material focus carries into DragonFly's coffee equipment, including this dripper, where the exterior surface uses a woven bamboo-inspired texture applied to New Bone China rather than a plain ceramic wall.
With the knob open, the Transit brews as a fast-flowing flat-bottom pour over and gives a clean, filter-style cup. With the knob closed, water stays in contact with the grounds for as long as you choose, then drains when you open it, giving a fuller, immersion-led cup. The base is built to hold its position as you turn the knob, so the dripper stays steady through the change. You can also variate the flow rate and explore your own new recipe for the coffee you choose to experiment with.
It holds 280ml, brews 1 to 2 servings, and takes 185 flat-bottom paper filters. The dripper can go in the dishwasher, while the Transit Base is rinsed by hand and wiped or left to air dry.
It comes in three combinations: a White dripper on a Black base with a Black knob, a Black dripper on a Black base with a Black knob, and a Black dripper on a Black base with a Blue knob.
• Rib structure: Twenty raised internal ribs support the filter paper and keep its shape through the brew.
• Tri-Spin hollowed base: Disperses the outflow instead of concentrating it in the center, which reduces clogging at larger doses.
• New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.
The outer wall of the dripper carries a texture based on Wulong Weaving, a Chinese bamboo weaving technique. The texture forms an interwoven geometric pattern of repeating characters, bringing an element of Chinese tea culture to coffee brewing.

• Transit Dripper: DragonFly Tri-Spin FS Flat Transit Dripper (280ml) x 1
• Transit Base: DragonFly Tri-Spin FS Flat Transit Base x 1, in the knob color of your chosen option
|
Brand |
DragonFly Design Center |
|
Product Name |
Tri-Spin FS Flat Transit (280ml) |
|
Weight |
TBC |
|
Dimensions |
Transit Dripper: 104mm top diameter x 60mm bottom diameter x 77mm height Transit Base: 110mm (L) x 112mm (W) x 78mm (H) |
|
Material |
Transit Dripper: new bone china Transit Base: PC/ABS, 316L stainless steel, silica |
|
Care |
Transit Dripper: dishwasher safe. Also safe in microwave ovens and dish dryers. Transit Base: rinse with water, then wipe or air dry. Keep out of the microwave, dishwasher, and dish dryer. |
|
Origin |
TBC |
|
Capacity |
280ml, 1 to 2 servings |
|
Filter |
185 flat-bottom paper filter |
|
Heat Resistance |
Transit Dripper: up to 120°C (248°F) |
|
Brewing Modes |
Drip (switch open), immersion (switch closed) |
For the 280ml size please use 185 filters.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
DragonFly Design Center Conical Dripper Transit Base
Regular price $32.00 Save $-32.00A knob-controlled base for the DragonFly CT62 Transit Pro Dripper, letting it hold water for immersion or release it for drawdown
The Conical Dripper Transit Base from DragonFly Design Center is a knob-controlled base built for the DragonFly CT62 Transit Pro Dripper, available with a Black, White, Pink, or Purple knob. Turn the knob closed and the conical dripper becomes a full immersion brewer, holding the slurry for as long as your recipe calls for. Open it and the brew drains through the filter as a standard percolation pour over.
Setting the knob partway lets you meter the flow rate, so you can slow the drawdown without changing your grind size.
With the knob turned closed, water stays in contact with the grounds and extraction runs as immersion. Contact time is set by you, not by grind size and filter resistance. Turn the knob open and drawdown begins, finishing the brew as percolation, with water moving through the bed and the paper filter holding back fines and oils.
This makes hybrid recipes possible in a single brewer: a closed bloom for even saturation and degassing, an immersion phase to build body and extraction, then an open percolation finish for clarity. You can adjust the timing and balance of each phase on the fly, with no change to the dripper, filter, or grind.
The base comes apart in two sections joined by a magnetic connection, so it separates cleanly for rinsing and snaps back together for the next brew. Three feet keep it level on the server.
Set the CT62 Transit Pro Dripper on the base, place it over your server, and choose your starting configuration. With the knob closed, you control contact time directly. A closed bloom saturates the whole bed before any liquid drains, which reduces dry pockets and channeling and sets a foundation for even extraction.
With the knob open, the dripper behaves like a conventional conical pour over, and pour rate, pulse timing, and agitation drive the extraction.
The CT62 Transit Pro Dripper takes Size 02 conical paper filters.
• Knob control: A single knob opens and closes the flow path, moving between immersion and percolation mid-brew, with partial settings to adjust flow rate.
• Magnetic two-part base: The upper and lower sections join magnetically and detach for assembly and cleaning.
• Three-foot stand: A compact, three-foot footprint keeps the dripper stable over the server.
• Transit Base: DragonFly Conical Dripper Transit Base x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Conical Dripper Transit Base |
|
Weight |
150g net (300g gross, packaged) |
|
Dimensions |
110mm (L) x 112mm (W) x 82mm (H) |
|
Material |
Silicone, Tritan, POM, stainless steel |
|
Care |
Rinse with water, then wipe dry or air dry. Hand care only: keep out of the microwave, dishwasher, and dish dryer. |
|
Origin |
Made in China |
|
Compatible Dripper |
DragonFly CT62 Transit Pro Dripper |
|
Function |
Knob-controlled base: closed for immersion, open for drawdown |
|
Knob Color |
Black, White, Pink, Purple |

• Knob control: A single knob opens and closes the flow path, switching between immersion and drawdown mid-brew.
• Magnetic two-part base: The upper and lower sections join magnetically and detach for assembly and cleaning.
• Three-foot stand: A compact, three-foot footprint keeps the dripper stable over the server.
• Transit Base: DragonFly Conical Dripper Transit Base x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Conical Dripper Transit Base |
|
Weight |
150g net (300g gross, packaged) |
|
Dimensions |
110mm (L) x 112mm (W) x 82mm (H) |
|
Material |
Silicone, Tritan, POM, stainless steel (component breakdown TBC) |
|
Care |
Rinse with water, then wipe dry or air dry. Hand care only: keep out of the microwave, dishwasher, and dish dryer. |
|
Origin |
Made in China |
|
Compatible Dripper |
DragonFly CT62 Transit Pro Dripper |
|
Function |
Knob-operated switch base: closed for immersion, open for drawdown |
|
Knob Color |
Black, White, Pink, Purple |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
April Hybrid Brewer - option to add April Large Filters
Regular price $114.00 Save $-114.00Seeking simplicity in the coffee brewing methodology, Patrik developed the hybrid brewer to find a way to have delicious coffee with a simply yet effective brewing method. Pair with the April Large Wave filters for a simple brew.
The April Brewer merges the best aspects of both immersion and drip brewing techniques. By combining these methods, the brewer offers versatility and a unique brewing experience, allowing users to experiment with different approaches to coffee preparation.
Using a flat bottom brew bed approach as a basis, the brewer is made from selected materials that not only ensure durability but also contribute to a consistent and repeatable brewing process. Its flatbed design is one of the standout features, as it promotes even water distribution over the coffee grounds. This helps achieve consistent extraction, which is key to making the brewer process repeatable. Highlighting sweetness and clarity, this consistent extraction process makes the brewer well-suited for commercial use.
Another advantage of the April Hybrid Brewer is its flexibility. Whether you’re brewing a single cup, preparing multiple servings, or wanting to use as a cupping device, the April Hybrid Brewer is designed to adapt to different volumes, making it equally effective for both personal use and sharing. Moreover, the brewer is approachable and easy to use, which opens up a wide range of brewing possibilities. This adaptability makes it an excellent choice for anyone from beginners who are just learning the basics of coffee brewing to seasoned baristas looking to fine-tune their craft.
Adding to its practicality, the April Hybrid Brewer is optimized for use with large April paper filters developed by April Coffee Roasters.
In essence, the April Hybrid Brewer strikes a balance between simplicity and performance, making it an ideal tool for coffee enthusiasts who value both ease of use and high-quality results.
Watch the video to get some recipe inspiration!
Material: Glass, Silicone, Plastic, and Metal
Style: Flat Bed - Immersion
Cup Profile: Sweet & Round
Color(s): Orange and Pink
Made in: Indonesia
Paper Filters: April Paper Filters L
Years in development, we are excited to make this immersion - drip hybrid brewer available to the US market.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
| Item | Price | Qty | Total | |
|---|---|---|---|---|
| Subtotal |
$0.00 |
|||
| Shipping | ||||
| Total | ||||