Competitor Collections

Brew into it, taste from it, pour from it.

part of the Mazelab Solo Dripper brewing system

A single serving of pour over usually takes more pieces than the coffee does. A dripper, a server to catch the brew, a cup to taste it from, and three things to rinse afterward. The Mazelab Solo Sip puts the server and the tasting cup into one piece of ceramic, so the coffee stays where it landed until you drink it. The mouth is cut on a slant that holds a dripper directly, and a small spout at the front lets you pour into other cups when there is enough to share.

The Story Behind It

Designed by Jackie Tran

It comes from Jackie Tran, a finalist at the 2024 World Brewers Cup, and was designed in Prague. The starting point was a vessel that could do the work of two: catch a single brew as it falls, then serve as the cup you taste it from.

The slanted mouth is the piece that makes both jobs possible. Cut to match the profile of a dripper, it seats the brewer on top without a stand or a separate holder. That same angle draws the opening in toward the front, where a small spout gives you a defined edge to pour from instead of a wide ceramic rim.

Nothing is decanted along the way, which means the coffee is tasted in the ceramic it was brewed into, at the temperature it arrived at. The body carries a soft brushed matte exterior, a finish that reads as texture rather than gloss when you pick it up.

Product Details

The Setup

Set your dripper into the slanted mouth and brew straight into the vessel. The 400ml capacity holds a single serving with headroom above the brew. When the water has drawn through, lift the dripper away and drink from the same vessel, or use the front spout to pour into tasting cups.

The Ceramic Body

•    Material: Handmade grade ceramic. Full material and glaze specification TBC, confirm with Mazelab.

•    Finish: Soft brushed matte exterior.

•    Capacity: 400ml.

What’s in the Box

•    Mazelab Solo Sip  x 1

Arriving Friday 8.28 7pm CT

For the moment you stop brewing and start tasting.

A cup used for tasting does a different job than a cup used for serving. The shape of the rim, the way the form holds aroma, the way the liquid arrives at your palate: those details decide how much of the coffee you actually catch. The Solo Sip Sensory by Mazelab is a ceramic cup made for that job. It is the Solo Sip with the spout removed, an uninterrupted form built for focused tasting rather than pouring and sharing.

The Story Behind It

Mazelab is a roastery and coffee shop in Prague, founded by Jackie and Thu. The Solo brewing system came out of that shop, designed by Jackie Tran, the 2024 Czech Republic Brewers Cup Champion, and built around geometry: a dripper with a 40 degree internal angle and a sloped base, a wave filter, a server, and a tasting cup, each shaped to work with the others. George Jinyang Peng used the Solo Dripper to win the 2025 World Brewers Cup in Jakarta.

The Spoutless Version

The original Solo Sip is a server and tasting cup in one, with a small spout for pouring into other cups. The Sensory keeps everything except that spout. The shape is identical, including the slanted mouth that follows the dripper’s geometry, which Mazelab designed to guide aroma and flow directly to the palate.

Removing the spout leaves the rim continuous the whole way around, and that is the whole change. Mazelab describes the inner form as supporting clarity, sweetness, and structure in the cup. This is the version the team has been using in competition, and it is now in their shops as well.

The Form

A single piece of ceramic with no handle and no spout. The mouth is cut on a slant that follows the geometry of the Solo Dripper, so the rim sits higher on one side than the other. The exterior is finished in a soft brushed matte that feels calm and natural in the hand, and it comes in one color, beige.

What’s in the Box

•      Solo Sip Sensory ceramic tasting cup  x 1

Specifications

•      Material: Ceramic, listed by Mazelab as “handmade grade.”

•      Finish: Soft brushed matte exterior, the same ceramic and finish used across the current Mazelab cup line.

•      Form: Spoutless, with a slanted mouth matching the Solo Dripper. Holds 400ml when full.

The SIBARIST OREA B3 Wide filter is a high-quality paper filter designed for use with OREA brewers, especially models with a wider base. This 100-sheet pack brings B3 Specialty Coffee Filter technology to your pour-over setup, offering a balance of flow, control, and flavor clarity.

Filter Technology & Performance

The B3 Wide filter features thicker, low-porosity paper that provides a moderate flow rate. This allows for consistent saturation of the coffee bed and even extraction. The paper helps reduce bypass, ensuring that nearly all water passes through the coffee grounds for a reliable and precise brew.

Cup Profile

The B3 Wide filter produces a sweet, clean, and balanced cup. By retaining more oils and fine particles than faster-flowing papers, it delivers fuller body, richer sweetness, and nuanced flavors without compromising clarity. This makes it ideal for naturally processed, honey-processed, or complex beans where depth and balance are desired.

Materials & Craftsmanship

The filter's composition ensures minimal paper taste while allowing the coffee’s natural flavors to shine. The filters are packaged to maintain freshness and protect against dust or contamination.

This filter is ideal for OREA brewers with wider bases, coffees that benefit from enhanced body and sweetness, and pour-over brewers who want consistent, reliable results with clean, balanced flavor.

OREA FLAT 2. The Next Evolution in Zero Bypass Brewing

The OREA FLAT 2 carries the original SIBARIST FLAT concept into a new generation. It is thoughtfully designed to create a less bypass environment by gently sealing against the OREA interior walls. This prevents air channels from forming and keeps coffee particles from settling in fluted or wavy surfaces. The result is a calm, even, and more controlled extraction from start to finish.

Low Bypass Approach for Greater Precision
The OREA FLAT 2 introduces a fresh structure that makes SIBARIST’s low bypass design even more effective. It supports a low airflow flat bed that allows for a low bypass brew. This added stability brings more evenness and makes your brews easier to repeat with confidence. The filter is simple to use and slips naturally into your workflow, allowing a smoother brewing experience.

FAST Technology for a Clean, Steady Flow
The OREA FLAT 2 is made with FAST Specialty Coffee Filter technology, which helps water move through the coffee bed quickly and evenly. It maintains a more consistent drawdown without depending on air channels. This creates a smooth and predictable extraction that highlights clarity and sweetness in the cup.

Materials and Packaging
FAST Specialty Coffee Filter paper technology with materials crafted in Barcelona
Sealed packaging that preserves freshness and protects from dust and odors
Sustainable FSC certified paper packaging

Created for baristas, competition brewers, and thoughtful home enthusiasts, the FLAT 2 brings a new level of consistency, efficiency, and precision to your pour over ritual. It is made to support brews that feel steady, expressive, and deeply satisfying.

What's in the bundle

- One SMALL size ORIGAMI Dripper in the color of your choice

- One ORIGAMI AS Resin Holder

• One pack of ORIGAMI Wave Filter Pack (50 Sheets)

A porcelain brewer with 400 years of history

Made of minoware clay, the Origami Dripper carries 400 years of history of minoware production of the Gifu region, famous for its washi paper and pottery.

Minoware is a ceramic-making technique some 400-500 years old and only a few dozen artisans left in Japan still know the craft. By purchasing a Origami Dripper, you are bringing this rich tradition into your coffee brewing routine.

Excellent Brewer compatible with both wave and conical style filters

Made with high density clay, the Origami has excellent heat retaining properties. When used with the conical filter, the 20 folds encourages faster brew time by enabling faster airflow. When used with a wave style filter, it can be used as a flatbed brewer.

This ORIGAMI Small Dripper Intro Bundle includes everything you need for 1-2 cups servings. We have chosen a rotation of seasonal colors!

Compatible with the following Filters:

Hario 01 / Cafe 2 cup / Kalita 155 / Sibarist Cone S / ORIGAMI Cup 2 / April Flat Bottom Filter

RECIPES Want to read some recipes for brewing inspiration? Visit our Brew Recipe Blog for printable recipe cards!   

 As a safety precaution, all filters are final sale and not returnable.

A perfect fit with your UFO Dripper

Reinvent your recipes, reach new cups, and rediscover your coffees!

Introducing the FAST UFO Special Edition Filter, crafted to elevate your brewing experience with your UFO Dripper to new heights. Specially designed to seamlessly complement the UFO Dripper's 80 degree angle, this filter + brewer combination is a game-changer for coffee enthusiasts seeking unparalleled performance.

Engineered for excellence, the no-fold FAST UFO Special Edition Filter boasts a unique geometry that goes beyond the capabilities of standard filters. Experience a balanced drawdown speeds and heightened extractions that surpass not only our regular filters but also industry standards.

Designed to avoid bypass during the brewing process, the Sibarist UFO Special Edition Filters unlock the potential for extraordinary extractions. This innovative approach is perfect for those who appreciate the balanced drawdown rate of the 80 degree angle UFO Drippers.

Upgrade your brewing ritual with the FAST UFO Special Edition Filter, where precision meets innovation for a cup of coffee that transcends expectations. 

Air S Dripper + Resin Holder Bundle

In this bundle, you will get:

1. 1 x Air S Dripper in the color of your choice
2. 1 x AS Resin Holder

Excellent Brewer compatible with both wave and conical style filters

Introducing the AS Resin ORIGAMI Air S Brewer - a modern take on a classic favorite!

Experience brewing perfection with our excellent Brewer, designed to be compatible with both wave and conical style filters.

Crafted with a cutting-edge styrene-acrylonitrile copolymer, the Air S has high thermal stability, eliminating the need to preheat your brewer. This is especially suitable for outdoors and commercial use. The thermal stability also helps with providing a stable temperature environment for a fast brewing process.

The AS Resin series comes in a variety of translucent and lively colors, boasting a frosted finish that adds a touch of elegance to your brewing experience. These AS drippers are a stunning representation of the beloved original Origami series, but with the added benefit of being made from resin material. 

Prepare to be captivated by our breathtaking range of colors! The Origami Air S is available in six vibrant shades, making it the perfect companion for your professional brew bars or your exciting camping adventures. These eye-catching drippers will not only enhance your brew bar's aesthetics but also serve as a fantastic introduction to the world of home brewing.

To complete your brewing setup, simply pair the Air S with either the conical or wave style filter and opt for our optional resin dripper holder. With everything in place, you're good to go on your journey to brewing excellence!

What's in the bundle

And that's not all! When you choose the ORIGAMI AIR S Brewing Bundle, you'll receive everything you need for 1-2 cup servings. Here's what's included:

• One Air S ORIGAMI Dripper in the color of your choice: Select the shade that resonates with your style and let it become the centerpiece of your brewing setup.

• One ORIGAMI AS Resin Holder: Keep your dripper securely in place with our specially designed holder, ensuring stability and ease of use.

Compatible with the following Filters:

Hario 01 / Cafe 2 cup / Kalita 155 / Sibarist Cone S / ORIGAMI Cup 2 / April Flat Bottom Filter

Check out our Brewing Recipes!

Are you looking for brewing inspiration? We've got you covered! Visit our Brew Recipe Blog for printable recipe cards!, where you'll find an array of recipes to excite your taste buds. We even offer printable recipe cards, making it convenient for you to explore new flavors and techniques.

Elevate your brewing journey with the AS Resin ORIGAMI Air S Brewer. Discover a world of flavors, craftsmanship, and possibilities. Order yours today and experience the perfect blend of style and functionality!

As a safety precaution, all filters are final sale and not returnable.

CONE S fits with 01 size / Small/  1-2 cup size brewers.

Experience the fullest potential with SIBARIST Filters 

Fits with Conical Brewers. Two sizes available.

Experiment with fast flow filters by changing grind size, pulse rates and agitation

CONE

The CONE is the premium conical filter that provides faster, even and continuous flow for coffee brewing. It also provides a clean and silky result in your cup. Its unique FAST Specialty Coffee Filter technology makes it possible to explore new extraction conditions and recipes, which have been limited until now.

EXPLORE! 

Experiment with fine grinds and short pours with large amounts of water that stirs up the coffee bed, or conversely, use coarse grinds and long fine pours while maintaining a low water level with a full pulse and drawdown control.

FASTER  

The filter’s permeability enables a faster flow providing an extraction drawdown 15-40% faster than other filters.

NO CHOKING OR CLOGGING

The fast flow Sibarist filter  is less likely to choke or clog during the brewing process. Get the most out of your washed coffees or push your grind size limits to experience the full potential of your coffees.

CONTINUITY AND UNIFORMITY

The filter’s permeability offers greater circulation, minimizing the retention of liquid in the slurry, the creation of puddles or uneven drawdowns, even with fine grinds. This provides you with high control over extraction:

CONTROL OVER EXTRACTION

The pouring speed and turbulence have a direct effect on the filter’s flow and drawdown: cause-effect, making it possible to lengthen or shorten the extraction with the pouring valence.

EXPLORE USING FINER GRINDS

Its extraction speed allows users to explore finer grinds than ever before with percolation methods that do not choke or clog the filter.

ACHIEVE HIGHER EXTRACTIONS

The FAST Specialty Coffee Filter flow has the potential to yield higher extractions and performance values. It also has a lower LRR.

FULL BODY + CLEAN CUP

The permeability and structure of the paper provides an equilibrium between body and cleanliness, providing a unique silky mouthfeel that characterizes FAST papers.

Moreover: No paper impact on flavor

It leaves no trace of flavor or aroma in the cup. The material uses thinner fibers and less substance.

Pair the Sibarist CONE filter with Conical Drippers and Brewers

Hario V60 01: Cone S

Hario V60 02: Cone M

Origami Dripper S (including Air S): Cone S

Origami Dripper M: Cone M

Cafec Flower Dripper cup 1: Cone S

Cafec Flower Dripper cup 4: Cone M

Sibarist Cone XL: 

Classic Chemex 6 cups

Ratio glass carafe

  As a safety precaution, all filters are final sale and not returnable.

Be the first ones to get the B3 FLAT Specialty Coffee Filter!

The B3 FLAT Specialty Coffee Filter utilizes the B3 Specialty Coffee Filter paper technology, jointly developed by Sibarist and 2021 World Brewers Cup Champion Matt Winton. This FLAT filter is for flat bed drippers (Kalita 185 style).

B3 Filter Papers are 100% organic.

The B3 FLAT filter shape provides a brewing bed that promotes even extraction of the coffee particles, high uniformity turbulence and full access to the coffee bed. The B3 rigidness produce a minimum contact surface with the dripper and provides a fast extraction, but its material thickness and low porosity provides sweeter and clean cups, avoiding bypass during the brewing process.

Sibarist packaging are made using organic and composable materials.

B3 Flat filters are packaged in a flat stack with pre-folded creases for users to fold.

FILTER PREPARATION

1. Fold the 4 edges of the filter, following the indentation marks on the paper.When folding, it is fine to go over the folds, with no need to avoid the center area of the filter.
   
2. Place the filter on top of the dripper and gently push the edges of the filter with both hands to fold inwards
   
3. Starting from the center, gently and slowly rinse the filter with hot water by moving towards the outer edge in circular motion, while making sure that the entire surface of the filter is stuck to the walls of the dripper, without leaving any air channels between the filter and the filter holder.

The image shows how the filter should look before starting the infusion.

Manufactured with care in Barcelona.

Experience a new era of brewing with our cutting-edge DUAL CHAMBER filter—an engineering masterpiece poised to redefine industry norms.

This innovative filtration system boasts a dual-chamber design intentionally engineered to unlock a diverse range of brewing possibilities.

Explore and push boundaries in your brewing journey with the DUAL CHAMBER filter—a game-changer in coffee extraction. This innovative system features two chambers for precise flavor control.

Unleash creativity  across various brewing formulas, seamlessly integrated into a single session. You can now each new possibilities that maximizes the potential of your coffees.

Secure your preorder of our DUAL CHAMBER filter and gain access to first batch production, with filters arriving by the end of June.

As a safety precaution, all filters are final sale and not returnable.

When ordering OREA 50 sheets - you might be receive two Orea 25 sheet packs. This will not change the total sheet count for this product sold.

A perfect fit with your OREA V3

Reinvent your recipes, reach new cups, and rediscover your coffees!

Made specifically for the OREA V3 dripper, the FLAT Special edition OREA is a FLAT filter redesigned to fit perfectly with the OREA V3 brewer.

This special edition has the proper angles and diameters to ensure the zero bypass and a fast drawdown and great drain-through control.

FLAT

The FLAT is the unique and original non-fluted flat-bottomed filter for coffee drippers, designed and patented by SIBARIST. It offers a unique, smooth and unobstructed area that offers the perfect and even space for brewing with full access to the coffee bed. It eliminates the bypass effect and provides the most even extraction with the maximum coffee particle yield, preventing coffee particles from being trapped in fluted areas.

The FLAT uses the FAST Specialty Coffee Filter technology, its no-waves surface eliminates the bypass to provide a regular water contact to all coffee particles and continuous turbulence. Also have all the FAST Specialty Coffee Filter characteristics.

A COMPLETE FIT - ELIMINATING BYPASS

The air flow between the filter and the brewer is eliminated by the flat paper’s adhesion to the dripper walls when wet, thereby removing the “bypass” that can cause astringency in the cup.

The FLAT is very sensitive to dripper geometries and properties since once it is wet, the filter stitches to the dripper walls, eliminating the bypass effect and the air circulation through the filter. This makes it possible to obtain different flow rates depending on the dripper used, opening a new world of possibilities for the barista to experiment with and select the dripper depending on the target extraction time.

A CLEAN SILHOUETTE - NO WAVES

The filter CONE FAST eliminates the air gaps created between the waves of classic flat bed filter which ones produce the bypass effect, the FLAT FAST eliminates any air circulation between the filter and the dripper. The FAST Specialty Coffee paper provide enough permeability to provide a fast and excellent flow rate without these extra air channels. In addition, provides a characteristically clean taste and silky mouthfeel that is free of paper flavor.

The free waves shapes do not allow to the coffee particles to be trapped on the waves, providing a more uniform and complete extraction, ensuring that all the coffee particles used on the brew will be in contact with the water in a more uniform and complete fashion providing a more even extraction. The smooth surface offers a better geometry to create a more uniform turbulence.

UNIFORMITY IN TURBULENCE

A smooth, obstacle-free infusion volume provides freedom, more even turbulence and uniform circulation of particles in the slurry when pouring, resulting in even extractions.

MORE CONTROL OVER EXTRACTION

The pouring speed and turbulence have a direct effect on the filter’s flow and drawdown: cause-effect, making it possible to lengthen or shorten the extraction with the pouring valence.

UTILIZATION OF THE FULL COFFEE BED

Because the filter adheres to the dripper walls, it provides 100% access and view of the coffee-bed area, gaining you more pouring surface and full access to the coffee slurry.

FLOW RATES

The FLAT is very sensitive to dripper geometries and properties, making it possible to obtain different flow rates depending on the dripper used, opening up a new world of possibilities for the barista to experiment with and select the dripper combo depending on the target extraction time. Pair with a flow-rate-compatable scale to explore a new world of possibilities!

CONSISTENCY AND REPEATABILITY

Created to offer the greatest consistency and coffee particle extraction uniformity, the filter always provides the same geometry, with no coffee trapped or isolated in any fluted areas, providing continuous even agitation.

HIGHER EXTRACTION

The FAST Specialty Coffee Filter flow has the potential to yield higher extractions and performance values. It also has a lower LRR..

Moreover: No paper impact on flavor

It leaves no trace of flavor or aroma in the cup. The material uses thinner fibers and less substance.

 As a safety precaution, all filters and minerals are final sale and not returnable.

A porcelain brewer with 400 years of history

Made of minoware clay, the Origami Dripper carries 400 years of history of minoware production of the Gifu region, famous for its washi paper and pottery.

Minoware is a ceramic-making technique some 400-500 years old and only a few dozen artisans left in Japan still know the craft. By purchasing a Origami Dripper, you are bringing this rich tradition into your coffee brewing routine.

Excellent Brewer compatible with both wave and conical style filters

Made with high density clay, the Origami has excellent heat retaining properties. When used with the conical filter, the 20 folds encourages faster brew time by enabling faster airflow. When used with a wave style filter, it can be used as a flatbed brewer.

This ORIGAMI Small Dripper Intro Bundle includes everything you need for 1-2 cups servings. We have chosen a rotation of seasonal colors!

What's in the bundle

- One SMALL size ORIGAMI Dripper in the color of your choice

- One ORIGAMI AS Resin Holder or Wooden Holder

- One pack of original ORIGAMI SMALL dripper filter (100 sheets) by CAFEC Japan

Compatible with the following Filters:

Hario 01 / Cafe 2 cup / Kalita 155 / Sibarist Cone S / ORIGAMI Cup 2 / April Flat Bottom Filter

RECIPES Want to read some recipes for brewing inspiration? Visit our Brew Recipe Blog for printable recipe cards!   

The original paper filters designed specifically for the Origami Dripper, crafted by CAFEC in Japan.

Unlike traditional filters, these are cut for a smooth, ridge-free conical shape that sits cleanly inside the dripper, allowing for even water flow and consistent extraction, whether you're pouring fast for a brighter cup or slow for something richer and fuller-bodied.

Details:

• Style: Conical, no ridges. Designed to complement the Origami Dripper's fluted exterior while keeping the interior smooth for unrestricted flow
• Size: CUP2, ideal for 1–2 cups brew
• Quantity: 100 sheets per pack
• Material: Virgin pulp. Unbleached, chlorine-free, and free of any papery off-taste, so nothing gets between you and the coffee's true flavor
• Origin: Made in Japan by CAFEC, a name trusted by specialty coffee brewers worldwide

 As a safety precaution, all filters are final sale and not returnable.

Brews 1-2 Cups – popular size for morning ritual and competition brewing

The ORIGAMI Dripper Small is sized for 1-2 cup brewing, for the morning ritual or on coffee competition stage.

Handcrafted in Toki City, Gifu Prefecture, the ceramic heartland of Japan, the ORIGAMI Small Ceramic Dripper carries the same Mino-yaki porcelain tradition as its larger counterpart: a craft four to five hundred years old, practiced today by only a few dozen artisans. In your hands it is a brewer. In theirs it is a continuation of something much older.

The 20-fold interior works with both conical and wave style filters, giving you the freedom to brew to the cup you want, not the equipment you have. Conical filters encourage faster airflow and a brighter extraction. Wave filters settle the flow, producing something fuller and rounder. The porcelain holds heat steadily through both.

A Craft Worth Knowing

Mino-yaki is the ceramic tradition of the Toki area in Gifu Prefecture, a region long celebrated in Japan for its pottery and washi paper. The techniques used to produce ORIGAMI Drippers are the same ones that have shaped ceramics in this region for generations, refined over centuries and carried forward by the artisans who remain.

The ORIGAMI Dripper was designed by the founder of Trunk Coffee in collaboration with these makers. The result is a brewer shaped by both the culture it comes from and the demands of specialty coffee. It has been used by World Brewers Cup competitors and sits equally well on a competition table or a kitchen counter.

Excellent Brewer compatible with both wave and conical style filters 

The 20-fold interior of the ORIGAMI Dripper Small does two things well. With a conical filter, the folds create airflow channels between the filter and the dripper wall, encouraging faster, more even extraction. With a wave filter, the flat bed geometry changes the brew dynamic entirely, slowing flow rate and producing a fuller, rounder cup. One dripper, two distinct approaches.

The high-density Mino porcelain retains heat through the full pour, keeping the brew bed temperature stable from bloom to drawdown.

The ORIGAMI Dripper Small brews one to two cups, holding up to around 25 grams of dry grounds. It is the right size for a morning pour over or Brewers Cup competition

Recommended Set

A dripper collar or holder is strongly recommended to stabilize the ORIGAMI Dripper during brewing and prevent it from sitting directly in the server. The ORIGAMI Wooden Holder and ORIGAMI AS Resin Holder are both available separately and sized for this dripper. 

Compatible Filters

The ORIGAMI Dripper Small is compatible with the following filter papers. ORIGAMI also manufactures its own ORIGAMI Wave (Flat Bottom) Filter Box

Conical  Original ORIGAMI Conical Paper Filter for Small Dripper by CAFEC, Sibarist Filters - SMALL CONE for 01,  HIFLUX Coffee Filter - Cone Folding V 50 Sheets (small), Hario V60 Filter (01), Kono 1-2 cup filters

Wave  Origami Wave Small, Kalita Wave 155, April Small Wave Filter, Hiflux Wave Filter 155

We recommend trying different filters to explore recipes for your coffee