DragonFly Design Center “Mountain Path” MP62 Dripper with Coffee Blossom Channels
Regular price $50.00 Save $-50.00
A 62° new bone china cone for 1 to 2 servings, built to hold a consistent filter seat and an even drawdown
The “Mountain Path” MP62 Dripper from DragonFly Design Center is a new bone china pour over cone for 1-2 cup brew, designed for the Year of the Snake. It pairs a 62° wall angle with an interior groove pattern called the Coffee Blossom Channel, and takes small size conical paper filters.
How the MP62 Manages Flow
The 62° angle gives the filter paper a tight fit against the dripper wall and bed forms consistently with a dialed-in recipe is easier to repeat.
Beneath the paper, the Coffee Blossom Channel continues the inward-sloping flow design of DragonFly’s CT62, with a revised number and layout of grooves. Twelve long grooves run down the wall in pairs, with a short groove set between each pair. Each short groove forks at its end like a snake’s tongue, and the branches meet the long grooves on either side to form a diamond-shaped petal. A smaller diamond sits between neighboring pairs.
Seen from above, the grooves form two coffee flowers set in a crisscross at the center of the cone. DragonFly describes the channel as a three-section design.
Product Details
Brewing with the MP62
Set it on the DragonFly CC62 / FS62 / MP62 Dripper Holder over your server or mug. Rinse the filter with hot water to clear paper taste and preheat the cone, then bloom and pour to your recipe.
Filters for the MP62
• Size 01: Hiflux Folidng V01, Sibarist Cone S, or Original ORIGAMI Conical Paper Filter for Small Dripper by CAFEC.
The Coffee Blossom Channel and Cone
• 62° wall angle: Gives the filter a tight fit for even, repeatable bed formation.
• Coffee Blossom Channel: Paired long grooves and forked short grooves, continuing the inward-sloping flow design of the CT62.
• New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.
The Mountain Path Weave Exterior
The outer wall carries a texture based on Mountain Path Bamboo Weaving, a Chinese bamboo weaving technique. Turned upside down, the cone takes the shape of a mountain, and the woven pattern reads as stone steps spiraling from the base to the peak.
Snake motifs are set evenly into the vertical bamboo strips, worked into the weave so they sit within the pattern rather than on top of it. DragonFly shaped the texture to follow the line of the cone as a symbol of steady progress upward.
What’s in the Box
• Dripper: DragonFly “Mountain Path” MP62 Dripper with Coffee Blossom Channel x 1
Specifications
|
Brand |
DragonFly Design Center |
|
Product Name |
“Mountain Path” MP62 Dripper with Coffee Blossom Channel |
|
Weight |
TBC |
|
Dimensions |
113mm top diameter x 30mm bottom diameter x 69mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
TBC |
|
Capacity |
1 to 2 servings |
|
Filter Size |
V60 01 or 02 size cone paper filter |
|
Recommended Filters |
Sibarist Filters - SMALL CONE for 01 · Sibarist Filters - MEDIUM CONE for 02 · Original ORIGAMI Conical Paper Filter for Small Dripper by CAFEC · Original ORIGAMI Conical Paper Filter for Medium Dripper by CAFEC |
|
Wall Angle |
62° |
|
Internal Structure |
Coffee Blossom Channel: 12 long grooves in pairs, forked short grooves forming diamond-shaped petals |
|
Heat Resistance |
Up to 120°C (248°F) |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
ORIGAMI Glass Matcha Whisk Rest
Regular price $12.00 Save $-12.00A heat-resistant glass chasen holder that lets your matcha whisk dry with its tines open, so it keeps its shape for long-term use
The ORIGAMI Glass Matcha Whisk Rest is a chasen holder, known in Japanese as a kusenaoshi, made from heat-resistant glass. A whisk (chasen) is carved from a single piece of bamboo, and its tines take on the shape they dry in. Drying the whisk on a holder after each session lets water drain from the tines while they stay spread, so they are open and ready for the next bowl rather than bent inward or flattened.
ORIGAMI chose glass for this piece so its transparent, neutral material blends into a café counter or a home kitchen, and it gives the rest a light, contemporary presence beside the bowl and tin.
Part of the ORIGAMI Glass Matcha Series
The rest belongs to the same glass series as the ORIGAMI Glass Katakuchi Matcha Bowl, a spouted bowl for whisking and pouring. Used together, the bowl and rest keep the full preparation in one matching set: whisk in the bowl, pour from its spout, and set the chasen back on its rest.
Product Details
Two Ways to Set the Chasen
Placed in the usual position, the chasen stores neatly while the rest holds its tines in shape as they dry.
Turned upside down with the handle facing down, the chasen stays clean on the inside and ready to pick up. This position is useful when you are preparing several bowls in a row, such as during café service or when serving guests, because the whisk moves straight from the rest to the next bowl. Choose whichever position suits how you prepare and clean up.
The Glass Rest
• Shape retention: Supports the chasen so its tines dry in a naturally open shape instead of closing in.
• Two openings: A small 13mm opening and a large 38mm opening in a compact 59mm wide form.
• Heat-resistant glass: A clear, neutral body at 32g that suits a café bar or a home kitchen.
Caring for the Glass
Wash and dry the rest soon after use. This keeps matcha from staining the glass or carrying odors, and it keeps the glass clear over time. Use a small amount of mild detergent with lukewarm water and a soft sponge or bottle brush, then rinse thoroughly.
If matcha staining builds up, dissolve 1 teaspoon of baking soda in lukewarm water, soak the rest for 20 to 30 minutes, then rinse and wash gently. After washing, drain off excess water and air dry it upside down, wiping the inside with a paper towel if it is slow to dry.
As a result of the glassmaking process, slight wrinkles or small air bubbles may appear in the glass. These are natural characteristics of the material and do not affect how the rest performs.
What's in the Box
• Whisk Rest: ORIGAMI Glass Matcha Whisk Rest x 1
Specifications
|
Brand |
ORIGAMI |
|
Product Name |
Glass Matcha Whisk Rest |
|
Weight |
32g |
|
Dimensions |
59mm diameter x 40mm height. Small opening: 13mm diameter. Large opening: 38mm diameter. |
|
Material |
Heat-resistant glass (glass type TBC) |
|
Care |
Hand wash with a small amount of mild detergent and lukewarm water, then air dry upside down. Keep out of the dishwasher, microwave, oven, and direct flame, and avoid metal scrubbers, abrasive sponges, and sudden temperature changes. |
|
Origin |
China |
|
Function |
Chasen (bamboo matcha whisk) holder, also called a kusenaoshi |
|
Pairs With |
ORIGAMI Glass Katakuchi Matcha Bowl |
ORIGAMI Glass Katakuchi Matcha Bowl
Regular price $43.00 Save $-43.00A double-wall glass matcha bowl for visual enjoyment of the beauty of matcha.
The Origami Glass Katakuchi Matcha Bowl is a double-wall, heat-resistant glass bowl with a carefully designed pouring spout. Through the transparent glass, You can watch the whisk work through the walls, then pour the finished matcha into a cup or over milk without it running down the side.
Why Origami Made a Matcha Bowl in Glass
Matcha tools have traditionally been made from ceramic. Origami set that convention aside for this bowl and chose glass because it is lighter, cleaner, and visually neutral, so it fits a home kitchen, a café bar, or a tea setting without competing with the space around it.
Glass also changes what the whisking looks like. The movement of the chasen and the matcha building into suspension are visible from the side, so the preparation becomes part of the presentation before it is served. Ceramic, with its strong presence as a material, keeps that process hidden. The glass matcha bowl adds a more open and contemporary feel to the process.
The bowl is double-walled. The air layer between the inner and outer glass holds heat in the matcha, keeps the outside comfortable to hold, and reduces condensation on the outer wall, which keeps the surface around it dry. It also gives the matcha the look of floating inside the glass.
Product Details
Whisking and Pouring with the Katakuchi Spout
The spout is shaped to connect whisking and pouring into one motion: finish the whisk, tilt, and pour. It reduces dripping and lets you pour comfortably down to the last of the bowl.
That makes it useful well beyond straight usucha. Whisk a concentrated base and pour it over steamed or cold milk for a matcha latte, much the way a barista builds a latte on a shot of espresso. The bowl holds 350ml when filled to the brim.
The Double-Wall Glass Body
• Heat-resistant glass: Rated for thermal shock resistance of 120°C, suited to hot whisked matcha. Avoid sudden temperature changes.
• Double-wall construction: An insulating air layer keeps matcha warm, keeps the outer wall comfortable to hold, and reduces condensation.
• Sealed air chamber: The small opening left by the manufacturing process is sealed with silicone resin, keeping water out of the space between the walls.
Caring for the Glass
Glass keeps its clarity with simple daily care. Wash and dry the bowl soon after use to prevent matcha staining and odor transfer. Use a small amount of mild detergent with lukewarm water and a soft sponge or bottle brush, rinse thoroughly, then drain and air dry upside down. A paper towel helps dry the inside if needed.
If matcha staining builds up, dissolve 1 teaspoon of baking soda in lukewarm water, soak the bowl for 20 to 30 minutes, then rinse and wash gently. Keep metal scrubbers and abrasive sponges away from the glass, and use it off direct flame and outside the microwave, oven, and dishwasher.
What's in the Box
• Bowl: Origami Glass Katakuchi Matcha Bowl x 1
Specifications
|
Brand |
Origami |
|
Product Name |
Glass Katakuchi Matcha Bowl |
|
Weight |
Approx. 228g |
|
Dimensions |
145mm (W) x 127mm (D) x 80mm (H) |
|
Base Diameter |
70mm |
|
Material |
Heat-resistant glass, double-wall construction. Air chamber seal: silicone resin. |
|
Care |
Hand wash with mild detergent and lukewarm water using a soft sponge or bottle brush, then air dry upside down. Keep out of the microwave, oven, and dishwasher (including drying cycles), and away from direct flame. |
|
Origin |
Made in China |
|
Capacity |
350ml (full) |
|
Thermal Shock Resistance |
120°C |
|
Construction |
Double-wall glass bowl with katakuchi pouring spout |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
WPM 22oz Latte Art Pitcher with Wide Spout (previously known as Round) in Matte Black
Regular price $53.25 Save $-53.25A wide-spout latte art pitcher in matte black, sized for larger milk drinks and bold, high-flow pours. The 22oz Latte Art Pitcher with Wide Spout in Matte Black pairs WPM's signature slanted top with a wide-diameter body, giving baristas one pitcher that handles large to-go cups, milk sharing, and competition-style pours with clean, dramatic lines.
Built on WPM's #09 pitcher, the largest size in the Slow Pour Supply lineup, this edition combines an uncoated 304 (18/8) stainless steel interior with a matte black powder-coated exterior. A 9.5oz milk volume indicator helps keep milk portions consistent from one drink to the next, whether you are pouring a single large latte or splitting milk between two cups.
WHY YOU'LL LOVE IT
– Wide #09 spout produces a fast, natural flow for bold lines and quick service pours.
– 22oz capacity is sized for 12 to 16oz cups, including large to-go drinks.
– 9.5oz milk volume indicator gives a visual reference for portioning and sharing milk.
– Signature WPM slanted top brings the spout closer to the crema, reducing the tilt needed to start a pour.
– Wide body diameter gives milk room to move during steaming for smoother microfoam.
– Full handle supports any grip style and keeps larger, heavier pours stable.
– Matte black powder-coated exterior over an uncoated, food-safe stainless steel interior.
RECOMMENDED FOR
– 12 to 16oz milk beverages.
– Large to-go cups.
– Milk sharing between two drinks.
– High-volume café service.
– Bold, thicker-line patterns such as tulips, stacks, and wing base tulips.
– Competition and practice pours that call for a fast, dramatic flow.
DESIGN PHILOSOPHY
WPM's approach to latte art equipment centers on matching spout profile to pour volume. Slow Pour Supply carries four pitcher sizes for this reason, each paired with a specific cup range: 10oz for cups under 6oz, 15oz for 6 to 10oz, 17oz for 8 to 12oz, and 22oz for 12 to 16oz. The #09 sits at the top of that range, built for the drinks where a pitcher needs to move more milk without losing control.
The #09 spout was previously labeled as a round spout. As part of WPM's updated packaging, it is now designated Wide, a name that more accurately describes the spout-to-pitcher size ratio at 22oz. The pitcher's specifications and pouring performance are unchanged, so baristas familiar with the #09 round spout will find the same flow they already know.
DESIGN FEATURES
WPM #09 WIDE SPOUT
The #09 wide spout is designed for a fast, natural flow rate that supports high-contrast patterns with clean, dramatic lines. A higher flow lets baristas lay down bold, thicker lines and finish large drinks quickly, which keeps service moving during busy periods. It is one of WPM's most widely used spouts across commercial cafés and specialty coffee bars.
SIGNATURE SLANTED TOP
The slanted top is original to WPM's pitcher design and angles the milk stream toward the crema sooner. This reduces how far the pitcher must tilt before milk begins to flow, letting the spout sit closer to the surface for better definition and contrast. In a pitcher this size, less tilt also means a steadier start when the pitcher is full.
9.5OZ MILK VOLUME INDICATOR
A 9.5oz milk volume indicator gives baristas a visual reference while filling and steaming. It helps standardize milk portions across drinks, reducing waste and keeping recipes consistent. The indicator also makes it easier to judge an even split when sharing milk between two pitchers or two cups.
WIDE BODY DIAMETER
The wide body gives steaming milk more room to circulate. Better movement during texturing supports smoother, more even microfoam, which carries through to cleaner lines in the cup.
FULL HANDLE
The full handle accommodates a wide range of grip styles. At 22oz, a secure grip matters more, and the handle keeps the pitcher stable from the initial tilt through the final finishing lines.
MATTE BLACK POWDER-COATED FINISH
The exterior is finished with a matte black powder coating over the stainless steel body. The understated finish gives the pitcher a clean, professional look on the bar or the competition stage. The coating is applied to the exterior only, so it never comes into contact with milk.
304 (18/8) STAINLESS STEEL CONSTRUCTION
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. The interior is left uncoated, keeping it food safe and easy to clean after each use.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 22oz capacity is sized for 12 to 16oz cups, including large lattes and to-go drinks. Matching pitcher size to cup size keeps milk volume appropriate for the drink and avoids steaming far more milk than the pour requires.
POURING CHARACTERISTICS
The #09 wide spout delivers a fast, natural flow that favors bold, flowing lines over fine detail. Combined with the slanted top, it supports high-contrast patterns such as tulips, stacks, and wing base tulips with thicker lines across the larger surface of a big cup.
WORKFLOW
The pitcher's size and volume indicator make it practical for milk sharing, where one larger batch of steamed milk is divided between two drinks. The faster flow also helps shorten pour time on large to-go orders, keeping the bar moving without sacrificing presentation.
COMPETITION APPLICATIONS
The #09 is described by Slow Pour Supply as suited to both competition and service pours. Its predictable, high-flow stream supports routines built around bold patterns, and baristas who train on it during service can carry the same feel to the stage.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#09 |
|
Capacity |
22oz |
|
Recommended Cup Size |
12 to 16oz |
|
Spout |
Wide spout (previously designated round) |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicator |
9.5oz milk volume indicator |
|
Body |
Wide diameter |
|
Handle |
Full handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Matte black powder coating |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x 22oz Latte Art Pitcher with Wide Spout in Matte Black.
CARE & MAINTENANCE
Hand wash the pitcher with warm water and a mild detergent after each use, focusing on the interior where milk residue collects. Dry it immediately with a soft cloth to prevent water spots on the matte black finish. Avoid abrasive pads, harsh chemicals, or prolonged soaking, which can wear the powder coating over time. Wipe the outside with a clean microfiber cloth to keep the matte surface looking its best.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 22oz capacity is designed for 12 to 16oz cups, making it well suited to large lattes, to-go drinks, and milk sharing.
WHAT IS THE DIFFERENCE BETWEEN THE WIDE SPOUT AND THE ROUND SPOUT?
For the 22oz #09, there is no difference in the pitcher itself. WPM renamed the spout from round to wide to better describe the spout-to-pitcher size ratio at this size, and the specifications and performance remain the same.
WHAT PATTERNS DOES THE WIDE SPOUT SUPPORT?
The fast, natural flow suits bold, high-contrast patterns with thicker lines, such as tulips, stacks, and wing base tulips. It favors flowing lines over very fine detail.
WHAT IS THE 9.5OZ MILK VOLUME INDICATOR USED FOR?
It gives a visual reference for how much milk is in the pitcher while filling and steaming. This helps keep portions consistent and makes it easier to divide milk evenly when sharing between two drinks.
HOW SHOULD I CARE FOR THE MATTE BLACK FINISH?
Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads, harsh chemicals, and prolonged soaking to protect both the stainless steel interior and the matte powder-coated exterior.
The 22oz Latte Art Pitcher with Wide Spout in Matte Black brings WPM's proven #09 pitcher and signature slanted top to the largest size in the lineup. With a fast, natural flow, a 9.5oz volume indicator, and a wide body for smooth steaming, it gives baristas a dependable tool for large drinks, milk sharing, and bold pours in both daily service and competition.

Our largest size. The 22oz pitcher is perfect for 12-16oz cups. This is the perfect pitcher for milk sharing or to go cup sizes. Available in narrow, and wide (previously categorized as round) options.
ROUND SPOUT

Lipped round spout for bolder lines, this pitcher is great for thicker lines - slozettas, rosetta revolution, tulips, wing bases with thicker lines, and stacks. This pitcher is great for a higher flow rate. Available in our 10oz and 15oz pitchers
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
WPM 10OZ LATTE ART PITCHER WITH WIDE SPOUT IN CINDER
Regular price $41.25 Save $-41.25The WPM 10oz Latte Art Pitcher with Wide Spout in Cinder is built for small milk based espresso drinks, where precise pour placement matters more than volume. Finished in a matte Cinder exterior, it pairs WPM's signature slanted top with a wide diameter body and a WPM #06 spout, giving baristas a compact tool suited to macchiatos, cortados, and piccolos.
Built on WPM's proven #26 pitcher body, Cinder combines a food-grade stainless steel interior with a durable powder-coated exterior. The wide diameter body leaves extra room for steaming despite the pitcher's compact size, and the full handle supports multiple grip styles throughout the pour.
WHY YOU'LL LOVE IT
- Compact 10oz (300ml) capacity sized for small milk based espresso drinks.
- WPM #06 round spout from the Push and Flow series delivers a moderate, consistent flow suited to continuous pouring.
- Signature slanted top brings the milk stream closer to the crema layer sooner, producing fuller patterns with higher contrast.
- Wide diameter body leaves extra room for steaming despite the pitcher's compact size.
- Full handle accommodates multiple grip styles for comfort and stability during the pour.
- Matte Cinder exterior, an ash gray finish with a red hue.
RECOMMENDED FOR
- Macchiato, cortado, and piccolo service.
- Continuous pouring rather than edge-controlled drag techniques.
- Hearts, wing base tulips, stacked tulips, and slozettas.
- Baristas at beginner and up skill levels building pattern control.
DESIGN PHILOSOPHY
Cinder follows WPM's approach of pairing a proven pitcher body with a spout profile matched to a specific pour volume. The WPM #06 spout belongs to WPM's Push and Flow series, built for continuous pouring rather than edge-controlled drag techniques, and keeps flow moderate and consistent rather than fast.
Fitted to the 10oz #26 body, the same #06 spout reads proportionally wider than it does on WPM's larger-format pitchers, though the flow itself matches other #06 spouts in the line. The slanted top, a detail original to WPM's pitcher design, angles the stream toward the crema layer sooner, giving Cinder the same fuller, higher contrast patterns found across WPM's slanted top pitchers.
The name Cinder, an ash gray finish with a red hue, is credited to Morgan Eckroth.
DESIGN FEATURES
WPM #06 ROUND SPOUT
The #06 spout is part of WPM's Push and Flow series, developed for continuous pouring rather than edge-controlled drag techniques. It produces a moderate, consistent flow that gives baristas time to place milk accurately. At this 10oz volume, it suits hearts, wing base tulips, stacked tulips, and slozettas, and its forgiving flow makes it accessible to beginner and up skill levels while still supporting more advanced hybrid techniques as skill develops.
SIGNATURE SLANTED TOP
The slanted top is original to WPM's pitcher design and directs the milk stream at an angle that reaches the crema layer sooner. This reduces the tilt needed to start the pour, letting the spout sit closer to the surface and producing fuller patterns with higher contrast.
WIDE BODY DIAMETER
Relative to its 10oz capacity, the pitcher has a wide body diameter. This gives steaming milk more room to move during texturing, supporting smoother microfoam even in a pitcher sized for small pours.
FULL HANDLE
The full loop handle is sized to accommodate a range of grip styles. It keeps the pitcher stable through the full motion of a pour, from initial tilt to the final finishing lines.
CINDER MATTE FINISH
The exterior is finished in Cinder, an ash gray powder coating with a red hue, applied over food-grade stainless steel. The coating resists dings and helps the pitcher hold its shape under the repeated handling of daily café use.
304 (18/8) STAINLESS STEEL CONSTRUCTION
The pitcher is built from 304 (18/8) food-grade stainless steel. The interior is left uncoated, keeping it food safe and easy to clean after each use.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 10oz (300ml) capacity is sized for cups under 6oz, including macchiato, cortado, and piccolo. This keeps the milk volume matched to the cup, avoiding excess steamed milk left over after the pour.
POURING CHARACTERISTICS
The WPM #06 spout produces a moderate, consistent flow built for continuous pouring rather than edge-controlled drag techniques. Combined with the slanted top, this supports hearts, wing base tulips, stacked tulips, and slozettas.
WORKFLOW
The spout's moderate, forgiving flow makes Cinder accessible to baristas at a beginner-plus skill level who are building pattern control. It also gives more experienced baristas a dependable option for small-format, continuous pours where consistency matters more than flow rate.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#26 |
|
Name |
Cinder |
|
Capacity |
10oz (300ml) |
|
Spout |
WPM #06 round spout, Push and Flow series |
|
Top Design |
Signature WPM slanted top |
|
Body |
Wide diameter relative to capacity |
|
Handle |
Full loop handle |
|
Material, Interior |
304 (18/8) food-grade stainless steel, uncoated |
|
Material, Exterior |
Matte gray powder coating (Cinder finish) |
|
Origin |
China |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
- 1 x WPM 10oz Latte Art Pitcher with Wide Spout in Cinder.
CARE & MAINTENANCE
Hand wash the pitcher with warm water and a mild detergent after each use, focusing on the interior where milk residue collects. Dry it immediately with a soft cloth to keep the matte Cinder finish free of water spots. Avoid abrasive pads, harsh chemicals, or prolonged soaking, since milk's acidity can wear down stainless steel's protective layer over time if residue is left to sit.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 10oz (300ml) capacity is designed for cups under 6oz, such as macchiato, cortado, and piccolo.
WHAT SPOUT DOES THIS PITCHER USE, AND WHAT PATTERNS DOES IT SUPPORT?
It uses the WPM #06 round spout from WPM's Push and Flow series. At this volume, it suits hearts, wing base tulips, stacked tulips, and slozettas.
IS THIS PITCHER SUITABLE FOR BEGINNERS?
Yes. The #06 spout's moderate, consistent flow is forgiving during the pour, making it accessible to beginner and up skill levels while still supporting more advanced hybrid techniques as skill develops.
DOES THE WIDE BODY DIAMETER AFFECT STEAMING?
Yes. The wide diameter relative to the 10oz capacity gives milk more room to move during steaming, which supports smoother microfoam despite the pitcher's compact size.
WHERE DOES THE NAME CINDER COME FROM?
Cinder, an ash gray finish with a red hue, is credited to Morgan Eckroth.
HOW SHOULD I CLEAN AND MAINTAIN THE FINISH?
Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads and prolonged soaking to protect both the interior stainless steel and the matte Cinder exterior.
The WPM 10oz Latte Art Pitcher with Wide Spout in Cinder brings WPM's proven slanted top design to a compact, cup-matched size. Between the moderate flow of the #06 spout and the wide body diameter, it gives baristas a dependable tool for continuous, small-format pours in daily service or while building pattern control.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.

Perfect for <6oz cup sizes, these beautiful pitchers are the smallest size in our lineup. Available in both narrow, round and wide spout shape options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Please note that this product name has changed to reflect the spout: pitcher size relationship. The product remains the same.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
WPM 22oz Latte Art Pitcher with Wide Spout in Calamansi Mist
Regular price $53.25 Save $-53.25A wide-spout latte art pitcher in matte Calamansi Mist, sized for large milk drinks and bold, high-flow pours. The WPM 22oz Latte Art Pitcher with Wide Spout in Calamansi Mist pairs WPM's signature slanted top with a wide-diameter body, giving baristas one versatile pitcher for large to-go cups, milk sharing, and in-house pours with clean, dramatic lines.
Built on WPM's #09 pitcher, the largest size in the Slow Pour Supply lineup, this edition combines an uncoated 304 (18/8) stainless steel interior with a matte lime exterior. A 9.5oz milk volume indicator helps keep milk portions consistent from one drink to the next, whether you are pouring a single large latte or splitting milk between two cups.
WHY YOU'LL LOVE IT
- Wide #09 spout produces a fast, natural flow for bold, dramatic lines.
- 22oz capacity is sized for 12 to 16oz cups, including large to-go drinks.
- 9.5oz milk volume indicator gives a visual reference for portioning and sharing milk.
- Signature WPM slanted top brings the spout closer to the crema, reducing the tilt needed to start a pour.
- Wide body diameter gives milk room to move during steaming for smoother microfoam.
- Full handle supports any grip style and keeps larger, heavier pours stable.
- Matte Calamansi Mist exterior over an uncoated, food-safe stainless steel interior.
RECOMMENDED FOR
- 12 to 16oz milk beverages.
- Large to-go cups.
- Milk sharing between two drinks.
- In-house service where one pitcher needs to cover larger cup sizes.
- Bold, thicker-line patterns such as tulips, stacks, and wing base tulips.
- Practice and competition pours that call for a fast, dramatic flow.
DESIGN PHILOSOPHY
WPM's approach to latte art equipment centers on matching spout profile to pour volume. Slow Pour Supply carries four pitcher sizes for this reason, each paired with a specific cup range: 10oz for cups under 6oz, 15oz for 6 to 10oz, 17oz for 8 to 12oz, and 22oz for 12 to 16oz. The #09 sits at the top of that range, built for drinks where a pitcher needs to move more milk without losing control.
The #09 spout was previously labeled as a round spout. It is now designated Wide, a name that more accurately describes the spout-to-pitcher size relationship at 22oz. The pitcher itself is unchanged, so baristas who already know the #09 round spout will find the same flow and handling.
Calamansi Mist was introduced as a new color in 2025, and the name is credited to Howard Ki. The finish is offered across several formats, including the 10oz, 15oz, and 15oz handleless pitchers, so baristas can build a color-matched set that covers every cup size on the menu while keeping the pouring characteristics of each model unchanged.
DESIGN FEATURES
WPM #09 WIDE SPOUT
The #09 wide spout is designed for a fast, natural flow rate that supports high-contrast patterns with clean, dramatic lines. A higher flow lets baristas lay down bold, thicker lines and finish large drinks quickly, which keeps service moving during busy periods. The wider opening suits the larger surface area of a 12 to 16oz cup, where fine, narrow streams can look undersized.
SIGNATURE SLANTED TOP
The slanted top is original to WPM's pitcher design and angles the milk stream toward the crema sooner. This reduces how far the pitcher must tilt before milk begins to flow, letting the spout sit closer to the surface for better definition and contrast. In a pitcher this size, less tilt also means a steadier start when the pitcher is full.
9.5OZ MILK VOLUME INDICATOR
A 9.5oz milk volume indicator gives baristas a visual reference while filling and steaming. It helps standardize milk portions across drinks, reducing waste and keeping recipes consistent. The indicator also makes it easier to judge an even split when sharing milk between two cups.
WIDE BODY DIAMETER
The wide body gives steaming milk more room to circulate. Better movement during texturing supports smoother, more even microfoam, which carries through to cleaner lines in the cup.
FULL HANDLE
The full handle accommodates a wide range of grip styles. At 22oz, a secure grip matters more, and the handle keeps the pitcher stable from the initial tilt through the final finishing lines.
MATTE CALAMANSI MIST FINISH
The exterior is finished in a matte lime tone named Calamansi Mist. The distinctive color makes the pitcher easy to pick out on a crowded bar, which helps when several pitcher sizes are in rotation. The finish is applied to the exterior only, so it never comes into contact with milk.
304 (18/8) STAINLESS STEEL CONSTRUCTION
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. The interior is left uncoated, keeping it food safe and easy to clean after each use.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 22oz capacity is sized for 12 to 16oz cups, including large lattes and to-go drinks. Matching pitcher size to cup size keeps milk volume appropriate for the drink and avoids steaming far more milk than the pour requires.
POURING CHARACTERISTICS
The #09 wide spout delivers a fast, natural flow that favors bold, flowing lines over fine detail. Combined with the slanted top, it supports high-contrast patterns such as tulips, stacks, and wing base tulips with thicker lines across the larger surface of a big cup.
WORKFLOW
The pitcher works equally well for to-go and in-house pours, so one tool can cover the largest drinks on the menu. Its size and volume indicator make it practical for milk sharing, where one larger batch of steamed milk is divided between two drinks. The faster flow also shortens pour time on large orders, keeping the bar moving without sacrificing presentation.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#09 |
|
Capacity |
22oz |
|
Recommended Cup Size |
12 to 16oz |
|
Spout |
#09 wide spout (previously designated round) |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicator |
9.5oz milk volume indicator |
|
Body |
Wide diameter |
|
Handle |
Full handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Matte lime (Calamansi Mist) |
|
Color Name |
Calamansi Mist, named by Howard Ki |
|
Manufacturer |
WPM |

Our largest size. The 22oz pitcher is perfect for 12-16oz cups. This is the perfect pitcher for milk sharing or to go cup sizes. Available in narrow, and wide (previously categorized as round) options.
WIDE SPOUT

The Wide Spout is known for its dramatic yet very natural flow. Available only on our 22oz Wide Spout, 15oz Rowan, Cinder, Periwinkle, Creamsicle. This versatile pitcher can achieve very bold lines, and is the perfect pitcher for service pours. Great for wing based tulips and rosetta revolution, this pitcher is also great for stacks, and any framed patterns. A pitcher with a very high flow rate.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
WPM 22oz Latte Art Pitcher with Wide Spout in Brushed Steel
Regular price $47.00 Save $-47.00A wide-spout latte art pitcher in brushed steel, sized for larger milk drinks and bold, high-flow pours. The 22oz Latte Art Pitcher with Wide Spout in Brushed Steel pairs WPM's signature slanted top with a wide-diameter body, giving baristas one pitcher that handles large to-go cups, milk sharing, and competition-style pours with clean, dramatic lines.
Built on WPM's #09 pitcher, the largest size in the Slow Pour Supply lineup, this edition combines an uncoated 304 (18/8) stainless steel interior with a brushed steel exterior. A 9.5oz milk volume indicator helps keep milk portions consistent from one drink to the next, whether you are pouring a single large latte or splitting milk between two cups.
WHY YOU'LL LOVE IT
– Wide #09 spout produces a fast, natural flow for bold lines and quick service pours.
– 22oz capacity is sized for 12 to 16oz cups, including large to-go drinks.
– 9.5oz milk volume indicator gives a visual reference for portioning and sharing milk.
– Signature WPM slanted top brings the spout closer to the crema, reducing the tilt needed to start a pour.
– Wide body diameter gives milk room to move during steaming for smoother microfoam.
– Full handle supports any grip style and keeps larger, heavier pours stable.
– Classic brushed steel exterior over an uncoated, food-safe stainless steel interior.
RECOMMENDED FOR
– 12 to 16oz milk beverages.
– Large to-go cups.
– Milk sharing between two drinks.
– High-volume café service.
– Flowing, thicker-line patterns such as tulips, stacks, and wing base tulips.
– Competition and practice pours that call for a fast, dramatic flow.
DESIGN PHILOSOPHY
WPM's approach to latte art equipment centers on matching spout profile to pour volume. Slow Pour Supply carries four pitcher sizes for this reason, each paired with a specific cup range: 10oz for cups under 6oz, 15oz for 6 to 10oz, 17oz for 8 to 12oz, and 22oz for 12 to 16oz. The #09 sits at the top of that range, built for the drinks where a pitcher needs to move more milk without losing control.
The #09 spout was previously labeled as a round spout. As part of WPM's updated packaging, it is now designated Wide, a name that more accurately describes the spout-to-pitcher size ratio at 22oz. The pitcher's specifications and pouring performance are unchanged, so baristas familiar with the #09 round spout will find the same flow they already know.
DESIGN FEATURES
WPM #09 WIDE SPOUT
The #09 wide spout is designed for a fast, natural flow rate that supports high-contrast patterns with clean, dramatic lines. A higher flow lets baristas lay down bold, thicker lines and finish large drinks quickly, which keeps service moving during busy periods. It is one of WPM's most widely used spouts across commercial cafés and specialty coffee bars.
SIGNATURE SLANTED TOP
The slanted top is original to WPM's pitcher design and angles the milk stream toward the crema sooner. This reduces how far the pitcher must tilt before milk begins to flow, letting the spout sit closer to the surface for better definition and contrast. In a pitcher this size, less tilt also means a steadier start when the pitcher is full.
9.5OZ MILK VOLUME INDICATOR
A 9.5oz milk volume indicator gives baristas a visual reference while filling and steaming. It helps standardize milk portions across drinks, reducing waste and keeping recipes consistent. The indicator also makes it easier to judge an even split when sharing milk between two pitchers or two cups.
WIDE BODY DIAMETER
The wide body gives steaming milk more room to circulate. Better movement during texturing supports smoother, more even microfoam, which carries through to cleaner lines in the cup.
FULL HANDLE
The full handle accommodates a wide range of grip styles. At 22oz, a secure grip matters more, and the handle keeps the pitcher stable from the initial tilt through the final finishing lines.
BRUSHED STEEL, UNCOATED FINISH FOR COMMERICAL USE
The exterior is finished in brushed steel, a classic, understated look that suits any bar setup, from busy cafés to the competition stage. The interior is left uncoated, so milk only ever contacts food-safe stainless steel.
304 (18/8) STAINLESS STEEL CONSTRUCTION
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. The interior is left uncoated, keeping it food safe and easy to clean after each use.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 22oz capacity is sized for 12 to 16oz cups, including large lattes and to-go drinks. Matching pitcher size to cup size keeps milk volume appropriate for the drink and avoids steaming far more milk than the pour requires.
POURING CHARACTERISTICS
The #09 wide spout delivers a fast, natural flow that favors bold, flowing lines over fine detail. Combined with the slanted top, it supports high-contrast patterns such as tulips, stacks, and wing base tulips with thicker lines across the larger surface of a big cup.
WORKFLOW
The pitcher's size and volume indicator make it practical for milk sharing, where one larger batch of steamed milk is divided between two drinks. The faster flow also helps shorten pour time on large to-go orders, keeping the bar moving without sacrificing presentation.
COMPETITION APPLICATIONS
The #09 is described by Slow Pour Supply as suited to both competition and service pours. Its predictable, high-flow stream supports routines built around bold patterns, and baristas who train on it during service can carry the same feel to the stage.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#09 |
|
SKU |
7109ST |
|
Capacity |
22oz |
|
Recommended Cup Size |
12 to 16oz |
|
Spout |
Wide spout (previously designated round) |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicator |
9.5oz milk volume indicator |
|
Body |
Wide diameter |
|
Handle |
Full handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Brushed Steel |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x 22oz Latte Art Pitcher with Wide Spout in Brushed Steel.
CARE & MAINTENANCE
Hand wash the pitcher with warm water and a mild detergent after each use, focusing on the interior where milk residue collects. Dry it immediately with a soft cloth to prevent water spots on the brushed steel finish. Avoid abrasive pads, harsh chemicals, or prolonged soaking, which can mark the brushed surface. Wipe the outside with a clean microfiber cloth to keep the finish looking its best.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 22oz capacity is designed for 12 to 16oz cups, making it well suited to large lattes, to-go drinks, and milk sharing.
WHAT IS THE DIFFERENCE BETWEEN THE WIDE SPOUT AND THE ROUND SPOUT?
For the 22oz #09, there is no difference in the pitcher itself. WPM renamed the spout from round to wide to better describe the spout-to-pitcher size ratio at this size, and the specifications and performance remain the same.
WHAT PATTERNS DOES THE WIDE SPOUT SUPPORT?
The fast, natural flow suits bold, high-contrast patterns with thicker lines, such as tulips, stacks, and wing base tulips. It favors flowing lines over very fine detail.
WHAT IS THE 9.5OZ MILK VOLUME INDICATOR USED FOR?
It gives a visual reference for how much milk is in the pitcher while filling and steaming. This helps keep portions consistent and makes it easier to divide milk evenly when sharing between two drinks.
HOW SHOULD I CARE FOR THE BRUSHED STEEL FINISH?
Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads, harsh chemicals, and prolonged soaking to protect both the stainless steel interior and the brushed steel exterior.
The 22oz Latte Art Pitcher with Wide Spout in Brushed Steel brings WPM's proven #09 pitcher and signature slanted top to the largest size in the lineup. With a fast, natural flow, a 9.5oz volume indicator, and a wide body for smooth steaming, it gives baristas a dependable tool for large drinks, milk sharing, and bold pours in both daily service and competition.

Our largest size. The 22oz pitcher is perfect for 12-16oz cups. This is the perfect pitcher for milk sharing or to go cup sizes. Available in narrow, and wide (previously categorized as round) options.
ROUND SPOUT

Lipped round spout for bolder lines, this pitcher is great for thicker lines - slozettas, rosetta revolution, tulips, wing bases with thicker lines, and stacks. This pitcher is great for a higher flow rate. Available in our 10oz and 15oz pitchers
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
WPM 10OZ LATTE ART PITCHER WITH WIDE SPOUT IN HOPE
Regular price $41.25 Save $-41.25A latte art pitcher in Hope, sized for small milk based drinks and built for steady, consistent pours. The WPM 10oz Latte Art Pitcher with Wide Spout in Hope holds 10oz (300ml) of milk and combines WPM's signature slanted top with a wide diameter body and a full handle. The pitcher uses a WPM #06 round spout and is finished in a gloss Hope exterior, a pink powder coating unique to this color series.
The wide diameter body leaves additional room for the milk to move during steaming, while the full handle supports a range of grip styles throughout the pour. WPM's slanted top directs the milk stream at an angle that reaches the crema layer sooner, producing fuller, higher contrast patterns without excessive tilt.
WHY YOU'LL LOVE IT
– Compact 10oz body sized for macchiato, cortado, and piccolo pours.
– WPM #06 round spout delivers a moderate, consistent flow for controlled placement.
– Signature slanted top brings the milk stream closer to the crema, reducing the tilt needed to start a pour.
– Wide body diameter gives steaming milk extra room to move, supporting smoother microfoam.
– Full handle accommodates a range of grip styles for comfort and stability during the pour.
– Gloss Hope finish gives the exterior a distinct, vibrant pink appearance.
RECOMMENDED FOR
– Macchiato, cortado, and piccolo service.
– Hearts, stacked tulips, and wing based tulips.
– Baristas building pattern control before moving to narrower or wider spout profiles.
– Cafes seeking a distinct color option for small format pours.
DESIGN PHILOSOPHY
Hope belongs to WPM's color series, which pairs the brand's proven pitcher bodies with distinct exterior finishes rather than changing the underlying engineering. Model #26 carries the Hope finish in a 10oz format, and the same color is also available in a 15oz pitcher fitted with a WPM #06 round spout, giving cafes a matching set across pour volumes.
At 10oz, the Hope pitcher keeps the #06 spout's round profile and moderate, consistent flow, though the opening reads proportionally wider on this smaller body than it does on WPM's larger pitchers. The spout belongs to WPM's Push and Flow series, built for continuous pouring rather than the edge controlled drag techniques used with narrower competition spouts.
DESIGN FEATURES
WPM SIGNATURE SLANTED TOP
WPM's slanted top is original to the brand's pitcher line and angles the milk stream toward the crema surface sooner than a flat top design. This reduces the tilt needed to begin a pour, letting the spout sit closer to the surface for finer detail and higher contrast patterns.
WPM #06 ROUND SPOUT
The #06 spout is part of WPM's Push and Flow series, designed for continuous pouring with a moderate, consistent flow rather than a fast or narrow one. On this 10oz body, the opening reads proportionally wider than it does on larger WPM pitchers, though the flow rate matches other #06 spouts in the line. The round profile suits hearts, stacked tulips, and wing based tulips, and its forgiving flow makes it a practical option for baristas developing pattern control.
WIDE BODY DIAMETER
Relative to its 10oz capacity, the pitcher has a wider body diameter. This gives steaming milk more room to move during texturing, supporting smoother microfoam even at this compact volume.
FULL HANDLE
The full loop handle is sized to accommodate a range of grip styles. It keeps the pitcher stable through the full motion of a pour, from initial tilt to finishing lines.
GLOSS HOPE FINISH
The exterior is finished in Hope, a gloss pink powder coating applied over a food grade stainless steel body. The gloss finish gives the pitcher a distinct, vibrant appearance that sets it apart within WPM's color series.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 10oz (300ml) capacity is sized for cups under 6oz, including macchiato, cortado, and piccolo. At this volume, there is not enough milk for hybrid, multi stage pours.
POURING CHARACTERISTICS
The WPM #06 spout produces a moderate, consistent flow that favors control over speed. Paired with the slanted top, this supports precise placement for hearts, stacked tulips, and wing based tulips.
WORKFLOW
The spout's moderate, forgiving flow suits baristas at a beginner and up skill level, while still rewarding more precise base and layering technique as skill develops. It also gives experienced baristas a dependable option for small format service pours.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#26 |
|
Name |
Hope |
|
Capacity |
10oz (300ml) |
|
Spout |
WPM #06 round spout, Push and Flow series |
|
Top Design |
Signature WPM slanted top |
|
Body |
Wide diameter relative to capacity |
|
Handle |
Full loop handle |
|
Material, Interior |
304 (18/8) food grade stainless steel, uncoated |
|
Material, Exterior |
Gloss pink powder coating (Hope finish) |
|
Origin |
China |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x WPM 10oz Latte Art Pitcher with Wide Spout in Hope.
CARE & MAINTENANCE
Hand wash the pitcher with warm water and a mild detergent after each use. Dry it immediately with a soft cloth to keep the gloss finish free of water spots. Avoid abrasive pads, harsh chemicals, or prolonged soaking, since milk residue left to sit can affect both the interior stainless steel and the exterior finish over time.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 10oz (300ml) capacity is designed for cups under 6oz, such as macchiato, cortado, and piccolo.
WHAT SPOUT DOES THIS PITCHER USE, AND WHAT PATTERNS DOES IT SUPPORT?
It uses the WPM #06 round spout from WPM's Push and Flow series. At this volume, it suits hearts, stacked tulips, and wing based tulips.
IS HOPE AVAILABLE IN OTHER SIZES?
Yes. Hope is also available in a 15oz pitcher fitted with a WPM #06 round spout.
IS THIS PITCHER SUITABLE FOR BEGINNERS?
Yes. The #06 spout's moderate, consistent flow is forgiving during the pour, making it a practical starting point for baristas building pattern control.
HOW SHOULD I CLEAN AND MAINTAIN THE FINISH?
Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads and prolonged soaking to protect both the interior stainless steel and the gloss exterior.
The WPM 10oz Latte Art Pitcher with Wide Spout in Hope brings WPM's proven slanted top design to a compact, cup matched size with a distinct gloss finish. Between the moderate flow of the #06 spout and the wider body diameter, it gives baristas a dependable tool for precise, small format pours in daily service or while building pattern control.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.

Perfect for <6oz cup sizes, these beautiful pitchers are the smallest size in our lineup. Available in both narrow, round and wide spout shape options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Please note that this product name has changed to reflect the spout: pitcher size relationship. The product remains the same.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in "Periwinkle"
Regular price $49.50 Save $-49.50Model #22 15oz Slow Pour Supply Signature Spout
A wider spout makes this a versatile pitcher for dramatic bold lines and service pours.
Product Details
-
Our widest spout for dramatic bold lines - swipe to the last photo to see comparison between Periwinkle and our regular round spout.
-
Signature WPM slanted top design with 6 oz milk volume indicator
-
Full Handle for any gripping style
-
Material: 304 18/8 Stainless Steel. Uncoated, food safe interior. Matte blue powder coated exterior.
-
Wide diameter

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
WIDE SPOUT

The Wide Spout is known for its dramatic yet very natural flow. Available only on our 22oz Wide Spout, 15oz Rowan, Cinder, Periwinkle, Creamsicle. This versatile pitcher can achieve very bold lines, and is the perfect pitcher for service pours. Great for wing based tulips and rosetta revolution, this pitcher is also great for stacks, and any framed patterns. A pitcher with a very high flow rate.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
WPM 15oz Latte Art Pitcher with Narrow Spout “Blankenburg”
Regular price $45.25 Save $-45.25WPM 15OZ LATTE ART PITCHER WITH NARROW SPOUT “BLANKENBURG”
Product Title (rendered as H1 automatically by Shopify, not repeated in the body copy)
The WPM 15oz Latte Art Pitcher with Narrow Spout “Blankenburg” is a matte white latte art pitcher built for baristas who want fine, controlled lines in 6 to 8oz milk drinks. It pairs WPM’s #07 narrow spout with the signature WPM slanted top, producing a focused, medium-rate stream suited to rosettas, stacks, wing base tulips, and combination patterns in flat whites, small lattes, and cappuccinos.
The Blankenburg finish was developed with 2025 US Barista Champion Kay Cheon to solve a specific competition problem: fingerprints and milk stains that cost points under clean pitcher judging. A 6oz milk volume indicator inside the pitcher keeps milk portions consistent, whether you are rehearsing a routine or pouring through a busy morning service.
WHY YOU'LL LOVE IT
– Matte white finish developed with 2025 US Barista Champion Kay Cheon to help the pitcher stay visually clean on the competition stage.
– WPM #07 narrow spout produces finer lines without sacrificing flow, giving precise control over placement.
– Signature WPM slanted top creates a more horizontal flow and a gentler initial contact with the crema for higher contrast.
– 6oz milk volume indicator helps standardize milk portions without a separate measuring vessel.
– Wide body diameter gives milk room to move during steaming for smoother, more even microfoam.
– Full loop handle supports any grip style and keeps the pitcher steady from first tilt to final line.
– Uncoated 304 (18/8) stainless steel interior keeps every surface that touches milk food safe and easy to clean.
RECOMMENDED FOR
– 6 to 8oz milk beverages, including flat whites, small lattes, and cappuccinos.
– Fine-line patterns such as rosettas, stacks, wing base tulips, and combination patterns.
– Barista and latte art competition routines where pitcher cleanliness is judged.
– Latte art practice that relies on consistent, measured milk portions.
– Daily café service where precise placement matters as much as speed.
ABOUT THE BLANKENBURG COLLABORATION
The Blankenburg edition began when United States Barista Championship competitor Kay Cheon, later the 2025 US Barista Champion, approached Slow Pour Supply with an idea for a pitcher built around the demands of competition. Anita, Slow Pour Supply’s owner and a USBC Lead Technical Judge, recognized a recurring issue from the judging side. A single fingerprint or small milk drip on the side of a pitcher can cost a competitor points under clean pitcher criteria.
Working with WPM, the team developed a coating with the right sheen and color to resist showing milk stains and fingerprints. The result keeps WPM’s proven pitcher bodies and spout profiles unchanged and focuses the refinement on the exterior, where competition judging and daily presentation meet. The finish is now offered across several WPM pitcher sizes and spout profiles, including this 15oz narrow spout format.
Kay named the pitcher after Mark Blankenburg, the dairy delivery driver for Dune Coffee Roasters, where Kay worked and competed from. Mark routinely went out of his way to secure the freshest possible milk before competition travel, and the name recognizes the people behind the scenes who make coffee service possible.
DESIGN FEATURES
WPM #07 NARROW SPOUT
The #07 narrow spout, previously designated a sharp spout, has a lipped, sharp, slightly rounded profile. Its narrower opening reduces the flow rate at the pour point, which gives the barista more time and control to place milk exactly where it is needed. The spout produces finer lines while maintaining a medium flow rate, making it well suited to rosettas, stacks, wing base tulips, and combination patterns.
SIGNATURE SLANTED TOP
The slanted top is original to WPM’s pitcher design and angles the pour edge so milk exits from a single, defined point. This creates a more horizontal flow than a traditional flat-top pitcher, which allows a less abrupt initial contact with the crema. A gentler start supports higher contrast and sharper color definition in the finished pattern.
6OZ MILK VOLUME INDICATOR
A 6oz milk volume indicator is marked on the interior wall of the pitcher. It gives a visual reference while filling and steaming, so milk portions stay consistent from one drink to the next. Consistent dosing reduces milk waste and removes one variable when repeating a pattern in practice or competition.
WIDE BODY DIAMETER
The body is wide in diameter relative to its 15oz capacity. This shape gives milk more room to circulate during steaming than a taller, narrower pitcher would allow. Better circulation supports smoother, more even microfoam, which carries through to cleaner lines in the cup.
FULL LOOP HANDLE
The full loop handle is sized to accommodate a range of grip positions. It keeps the pitcher balanced and stable through the full motion of a pour, from the initial tilt through the finishing lines. A secure, comfortable grip also helps reduce fatigue during long practice sessions.
BLANKENBURG MATTE WHITE FINISH
The exterior is finished in a matte white powder coat chosen for competition use. Its sheen and color were selected to minimize visible fingerprints and milk stains, helping the pitcher present cleanly under stage lighting and judge review. The coating is applied to the exterior only, so it never comes into contact with milk.
304 (18/8) STAINLESS STEEL CONSTRUCTION
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. The interior is left uncoated, keeping it food safe and easy to clean after each use. The sturdy construction helps the pitcher hold its shape and spout geometry through daily temperature changes and commercial use.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 15oz (450ml) capacity is sized for 6 to 8oz cups, including flat whites, small lattes, and cappuccinos. Slow Pour Supply’s size guide places the 15oz pitcher within a 6 to 10oz cup range, and it is the most popular size in the lineup. Matching pitcher volume to cup size keeps milk portions appropriate and avoids steaming far more milk than the drink requires.
POURING CHARACTERISTICS
The #07 narrow spout delivers a focused stream at a medium flow rate, favoring fine lines and precise placement over bold, thick strokes. Combined with the slanted top, it supports crisp, high-contrast rosettas, stacks, wing base tulips, and combination patterns. The longer pour required at 15oz stays controlled because the narrow spout limits how quickly milk leaves the pitcher.
WORKFLOW
The 6oz volume indicator lets baristas portion milk without a separate measuring vessel, which speeds up setup and keeps drinks consistent during service. The narrow spout’s steady, focused flow makes pour placement easier to learn while still rewarding advanced technique, so the pitcher works for baristas at a beginner level and above.
COMPETITION APPLICATIONS
The matte white finish was created specifically to help competitors present a clean pitcher, a detail that can affect scoring. Paired with the precise #07 spout and a consistent 6oz reference line, the pitcher supports repeatable routines on stage. Baristas who train on it during daily service can carry the same feel and flow directly into competition.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#07 |
|
Name |
Blankenburg |
|
Capacity |
15oz (450ml) |
|
Recommended Cup Size |
6 to 8oz |
|
Spout |
WPM #07 narrow spout (previously designated sharp) |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicator |
6oz milk volume indicator, interior wall |
|
Body |
Wide diameter relative to capacity |
|
Handle |
Full loop handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Matte white powder coat |
|
Weight |
263g |
|
Origin |
China |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x WPM 15oz Latte Art Pitcher with Narrow Spout “Blankenburg”.
CARE & MAINTENANCE
Wash the pitcher with warm water and a mild soap after every shift, focusing on the interior where milk residue collects. Milk fats, proteins, and sugars can leave a film that hardens over time if the pitcher is only rinsed, and spoiled milk produces lactic acid that can gradually wear down stainless steel’s protective layer.
Dry the pitcher with a towel immediately after washing, then leave it right side up to air out. Drying prevents water spots and supports long-term corrosion resistance. Avoid abrasive pads, harsh chemicals, and prolonged soaking, and wipe the exterior with a soft cloth to keep the matte white finish clean.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 15oz (450ml) capacity is designed for 6 to 8oz cups, such as flat whites, small lattes, and cappuccinos.
HOW DOES THE NARROW SPOUT DIFFER FROM THE ROUND SPOUT?
The #07 narrow spout has a sharper, slightly rounded profile that produces finer lines at a medium flow rate. The round spout produces bolder, thicker lines at a higher flow rate, so the narrow spout is the better fit for detailed rosettas, stacks, and combination patterns.
WHY IS THE MATTE WHITE FINISH USEFUL FOR COMPETITION?
Clean pitcher criteria can cost competitors points for a single fingerprint or milk drip. The Blankenburg coating was developed with Kay Cheon and WPM to resist showing fingerprints and milk stains, helping the pitcher stay visually clean on stage.
WHO IS THE BLANKENBURG PITCHER NAMED AFTER?
It is named after Mark Blankenburg, the dairy delivery driver for Dune Coffee Roasters. Kay Cheon chose the name to honor his support in sourcing the freshest milk ahead of competition travel.
WHAT IS THE 6OZ MILK VOLUME INDICATOR USED FOR?
It is a line on the interior wall that marks 6oz of milk. It helps you portion milk consistently while filling and steaming without needing a separate measuring vessel.
IS THIS PITCHER SUITABLE FOR BEGINNERS?
Yes. The narrow spout’s steady, focused flow makes pour placement easier to learn, while its precision continues to support more advanced patterns as skills develop.
The WPM 15oz Latte Art Pitcher with Narrow Spout “Blankenburg” brings WPM’s proven #07 narrow spout and signature slanted top to a matte white finish developed for the competition stage. With a 6oz volume indicator, a wide body for smooth steaming, and a coating designed to stay clean under scrutiny, it gives baristas a dependable tool for fine-line pours in both daily service and competition.

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
NARROW SPOUT

Lipped sharp, slightly rounded narrow spout enables finer lines without sacrificing the flow. This versatile pitcher is great for combination patterns, rosettas, stacks, wing base tulips, and any patterns that require finer lines with a medium flow rate. Available in 10, 15, 17, and 22oz pitchers.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
WPM 15oz Latte Art Pitcher with Round Spout in Matte Black
Regular price $45.25 Save $-45.25A versatile round-spout pitcher in matte black, balanced for multiple latte art patterns across standard cup sizes.
The WPM 15oz Latte Art Pitcher with Round Spout in Matte Black is a 15oz milk pitcher designed for standard latte and cappuccino pours. It uses WPM’s #06 spout, a round-profile spout that produces a broad, moderate pour stream compared to narrow spout profiles. This balanced flow makes it versatile across multiple latte art pattern types.
The pitcher includes a 6oz milk volume indent marked on the interior wall, allowing a set pour amount to be measured without a separate vessel, preventing milk waste. This format is commonly used for standard-size lattes and cappuccinos where baristas are learning and practicing pattern variation. The 15oz capacity provides ample milk for steaming and pouring.
Product Details
The Pitcher
The WPM 15oz Latte Art Pitcher with Round Spout in Matte Black uses WPM’s #06 spout in a 15oz format. It uses WPM’s slanted top design, an original WPM innovation where the pour edge is angled rather than flat. This slanted edge directs milk flow to a single exit point at an optimal angle, allowing the latte artist to reach the crema sooner and create fuller patterns with higher contrast. A 6oz milk volume indent is marked on the interior wall, allowing a set pour amount to be measured without a separate measuring vessel. The body is wide in diameter relative to its 15oz capacity, which allows the pitcher to hold enough milk to steam properly without the volume constraint of a taller, narrower shape. The handle is a full loop, sized to accommodate different grip positions. The exterior is finished in matte black.
Spout #06: Round Profile, Push and Flow
The #06 is a round-profile spout part of WPM’s Service Pour series. Round spouts produce a medium width ribbon of milk with a moderate, consistent flow rate. The #06 is categorized as a Push and Flow spout, meaning it’s designed for free-pour techniques using continuous, controlled milk movement rather than drag-and-draw styles.
Best for patterns: Wing base tulips, stacked hearts, medium-line rosettas (slozettas), and hybrid/combination pours. The moderate flow and broad pour stream make it forgiving for learning multiple pattern types.
Cup size fit: The 15oz pitcher volume is optimized for 6–8oz cups, making it ideal for flat white, small latte, and cappuccino. This mid-size cup format with the moderate #06 flow rate emphasizes precision and pattern definition in standard drinking vessels.
Skill level: Beginner friendly. The balanced flow of the round profile and the moderate volume of a 15oz pitcher make it a versatile choice for baristas who are learning and practicing multiple patterns without excessive difficulty.
What’s in the Box
WPM 15oz Latte Art Pitcher with Round Spout in Matte Black x 1
The Core Component
Spout: WPM #06 spout in a 15oz format. Round profile produces a moderate, consistent flow rate — broader than narrow spout profiles but more controlled than wide profiles. Part of WPM Service Pour series with engineered lip design. Includes a 6oz milk volume indent. Uses WPM’s slanted top design, an original WPM innovation that directs milk flow at an optimal angle, allowing the barista to reach crema sooner for fuller patterns and higher contrast.
Body: Wide diameter relative to capacity, holding a full 15oz for steaming. Rounded interior bottom promotes smooth frothing, promoting breaking of large bubbles into silky microfoam.
Handle: Full loop handle, sized for multiple grip positions.
Specifications
Brand WPM
Spout Type WPM #06 spout, 15oz round-spout format; Push and Flow category; Service Pour series
Volume 15oz ; 6oz milk volume indent for measured pours; optimized for 6–8oz cups
Material Interior: 304 18/8 stainless steel, uncoated, food-safe. Exterior: matte black finish – coating material/process not specified in source data; confirm with supplier before publishing.
Care Hand washed and wiped dry
Origin China

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
ROUND SPOUT

Lipped round spout for bolder lines, this pitcher is great for thicker lines - slozettas, rosetta revolution, tulips, wing bases with thicker lines, and stacks. This pitcher is great for a higher flow rate. Available in our 10oz and 15oz pitchers
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Matte White
Regular price $53.50 Save $-53.50WPM #21 Milk Pitcher — Blankenburg Edition, named by Kay Cheon, 2025 US Barista Champion A limited matte white edition named after Mark Blankenburg, the beloved milk delivery man behind Dune Coffee Roasters.
Color chosen by Kay Cheon, it is a quiet tribute to the people who make great coffee possible.
#21 Spout 17oz is a natural companion to the 10 oz and 22 oz Blankenburg for a complete bar flow setup.
Pour with definition
The WPM #21 is built for baristas who want crisp, defined lines on medium to large cups. Its protruding round tip and wider vessel make it the go-to choice for 10 to 12 oz pours where precision and contrast matter most.
Slanted Top Design
With dual volume indicators at 6 oz and 7.5 oz, the signature sloped rim gives you the same precise control WPM is known for, scaled for medium cup sizes. Tilt nearly horizontal before milk begins to flow, bringing the spout close to the surface for a gentler, more controlled pour every time.
Round Tip #21 Spout
Designed for defined, high-contrast output, the protruding round tip delivers crisp lines and a more horizontal flow that gives you greater surface coverage and expressive detail on larger canvases.
Ergonomic Handle and 304 Stainless Steel
Balanced for extended use and comfortable across grip styles, the pitcher is built to hold its shape through daily temperature swings and heavy commercial wear.

Perfect for 8-12oz cups, these 17oz pitchers provide a horizontal and intentional flow. The result is a controlled flow enabling high definition and contrast in the cup. Available in tapered sharp, narrow, round tip, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
22oz - Brushed Silver Pitcher with Round Spout by SLOW POUR SUPPLY
Regular price $47.00 Save $-47.00A versatile pitcher that is perfect for both competition and service pours. Great for large to-go cups, as well as milk sharing.
Product Details
-
Round spout, perfect for flowing, thicker lines pours
-
Signature WPM slanted top design with 9.5 oz milk volume indicator
-
Full Handle for any gripping style
-
Material: 304 18/8 Stainless Steel. Uncoated, food safe interior.
-
Brushed Silver
-
Wide diameter

Our largest size. The 22oz pitcher is perfect for 12-16oz cups. This is the perfect pitcher for milk sharing or to go cup sizes. Available in narrow, and wide (previously categorized as round) options.
ROUND SPOUT

Lipped round spout for bolder lines, this pitcher is great for thicker lines - slozettas, rosetta revolution, tulips, wing bases with thicker lines, and stacks. This pitcher is great for a higher flow rate. Available in our 10oz and 15oz pitchers
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Matte Black
Regular price $53.50 Save $-53.50A round tip latte art pitcher in matte black, built for baristas who want crisp, defined lines on medium to large cups. The 17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Matte Black pairs WPM's #21 protruding round tip spout with a wider vessel, making it a dependable choice for 10 to 12oz pours where precision and contrast matter most.
Built on WPM's signature slanted top design, this edition adds dual milk volume indicators at 6oz and 7.5oz to keep portions consistent across drink sizes. An uncoated 304 (18/8) stainless steel interior and a matte black exterior make it a practical tool for daily service, competition practice, and home bars alike.
WHY YOU'LL LOVE IT
– Protruding #21 round tip produces crisp, high-contrast lines with expressive detail.
– More horizontal flow gives greater surface coverage on larger cups.
– Dual volume indicators at 6oz and 7.5oz support consistent milk portioning.
– Signature WPM slanted top lets the spout start close to the crema for a gentler, more controlled pour.
– Wider vessel is sized for 10 to 12oz drinks without excess milk.
– Full ergonomic handle stays comfortable across grip styles during extended service.
– Uncoated 304 (18/8) stainless steel interior is food safe and easy to clean.
RECOMMENDED FOR
– 10 to 12oz milk beverages, including lattes and to-go cups.
– Pours that call for crisp, defined, high-contrast lines.
– Detailed patterns on larger cup surfaces.
– Consistent milk portioning across two drink sizes.
– Café service paired with 10oz and 22oz pitchers for a complete bar flow.
– Home baristas moving up to medium and large cup sizes.
DESIGN PHILOSOPHY
WPM's approach to latte art equipment centers on matching the spout to the pour volume. Slow Pour Supply carries four pitcher sizes for this reason, each paired with a cup range: 10oz for cups under 6oz, 15oz for 6 to 10oz, 17oz for 8 to 12oz, and 22oz for 12 to 16oz. The 17oz size fills the medium to large range, where a pitcher needs enough volume for a full latte without giving up control.
The #21 applies that philosophy to definition. Its protruding round tip shapes the milk stream for crisp lines, while the slanted top and dual volume indicators bring the precise control WPM is known for to medium cup sizes. The 17oz pitcher is offered in several spout profiles, and the round tip is the choice for baristas who prioritize contrast and clean line work on larger canvases.
DESIGN FEATURES
PROTRUDING ROUND TIP #21 SPOUT
The #21 spout extends a round tip beyond the rim of the pitcher. This shape is designed for defined, high-contrast output, producing crisp lines rather than soft, diffuse ones. Combined with a more horizontal flow, the round tip gives greater surface coverage and room for expressive detail on larger cups.
SIGNATURE SLANTED TOP
The slanted top is original to WPM's pitcher design. It allows the pitcher to tilt nearly horizontal before milk begins to flow, which brings the spout close to the crema surface at the start of the pour. A lower starting point means a gentler initial contact and more control over where the milk lands.
DUAL VOLUME INDICATORS AT 6OZ AND 7.5OZ
Two milk volume indicators are integrated into the slanted top at 6oz and 7.5oz. They give baristas a visual reference while filling and steaming, which helps standardize milk portions from one drink to the next. Having two marks makes it easier to keep recipes consistent when moving between cup sizes during service.
WIDER VESSEL
The 17oz body uses a wider vessel that holds enough milk for 10 to 12oz drinks. Matching vessel size to the cup keeps milk volume appropriate for the pour and limits the amount of steamed milk left over afterward.
FULL ERGONOMIC HANDLE
The full handle is balanced for extended use and accommodates a range of grip styles. It keeps the pitcher stable from the initial tilt through the final lines, which matters more as milk volume and pitcher weight increase.
304 (18/8) STAINLESS STEEL CONSTRUCTION
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. It is designed to hold its shape through daily temperature swings and heavy commercial use. The interior is left uncoated, keeping it food safe and easy to clean after each shift.
MATTE BLACK FINISH
The exterior is finished in matte black for a clean, understated look on the bar. The finish is applied to the exterior only, so the milk contacts uncoated stainless steel.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 17oz capacity is sized for 8 to 12oz cups and performs best on 10 to 12oz pours. This covers standard lattes and many to-go cups, keeping milk volume matched to the drink.
POURING CHARACTERISTICS
The protruding round tip delivers crisp, defined lines with a more horizontal flow. Paired with the slanted top, it allows a gentle, controlled start close to the surface, which supports high-contrast patterns with expressive detail across the larger surface of a medium to large cup.
WORKFLOW
The dual volume indicators make it simple to portion milk consistently during busy service. The 17oz size also pairs naturally with 10oz and 22oz pitchers, giving cafés a complete set that covers small, medium, and large drinks without forcing one pitcher to handle every cup size.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#21 |
|
SKU |
HC7121BK |
|
Capacity |
17oz |
|
Recommended Cup Size |
8 to 12oz, best suited to 10 to 12oz pours |
|
Spout |
#21 protruding round tip |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicators |
Dual milk volume indicators at 6oz and 7.5oz |
|
Handle |
Full ergonomic handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Matte black |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x 17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Matte Black.
CARE & MAINTENANCE
Wash the pitcher with soap and warm water after every shift, focusing on the interior. Milk contains fats, proteins, and sugars that rinsing alone will not remove, and residue left behind can harden and become difficult to clean. As milk spoils, it becomes more acidic, and prolonged exposure can wear down the protective layer of stainless steel.
After washing, dry the pitcher with a towel and leave it right side up to air out. Proper drying prevents water spots and protects the stainless steel over the long term. Avoid abrasive pads and harsh chemicals to protect the matte black finish.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 17oz capacity is designed for 8 to 12oz cups and is best suited to 10 to 12oz pours, including lattes and many to-go drinks.
WHAT DOES THE PROTRUDING ROUND TIP DO?
The round tip extends beyond the rim to shape a defined milk stream. It produces crisp, high-contrast lines and a more horizontal flow for greater surface coverage on larger cups.
WHAT ARE THE 6OZ AND 7.5OZ VOLUME INDICATORS FOR?
They are visual references for milk volume while filling and steaming. Using them helps keep portions consistent across drinks and reduces wasted milk.
HOW DOES THE SLANTED TOP IMPROVE MY POUR?
The slanted top lets you tilt the pitcher nearly horizontal before milk begins to flow. This brings the spout close to the surface for a gentler, more controlled start.
WHICH PITCHERS PAIR WELL WITH THE 17OZ?
The 17oz fits between WPM's 10oz and 22oz pitchers. Together they cover small, medium, and large cup sizes for a complete bar flow setup.
HOW SHOULD I CLEAN THIS PITCHER?
Wash with soap and warm water after every shift, then towel dry and leave it right side up to air out. Avoid abrasive pads and harsh chemicals to protect the finish.
The 17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Matte Black brings WPM's slanted top and #21 protruding round tip to medium and large cups. With crisp, defined lines, dual volume indicators, and durable 304 stainless steel construction, it gives baristas a precise, dependable tool for high-contrast pours in daily service and practice.

Perfect for 8-12oz cups, these 17oz pitchers provide a horizontal and intentional flow. The result is a controlled flow enabling high definition and contrast in the cup. Available in tapered sharp, narrow, round tip, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
WPM 17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Brushed Steel
Regular price $42.00 Save $-42.00A round tip latte art pitcher in brushed steel, built for baristas who want crisp, defined lines on medium to large cups. The 17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Brushed Steel pairs WPM's #21 protruding round tip spout with a wider vessel, making it a dependable choice for 10 to 12oz pours where precision and contrast matter most.
Built on WPM's signature slanted top design, this edition adds dual milk volume indicators at 6oz and 7.5oz to keep portions consistent across drink sizes. An uncoated 304 (18/8) stainless steel interior and a brushed steel exterior make it a practical tool for daily service, competition practice, and home bars alike.
WHY YOU'LL LOVE IT
– Protruding #21 round tip produces crisp, high-contrast lines with expressive detail.
– More horizontal flow gives greater surface coverage on larger cups.
– Dual volume indicators at 6oz and 7.5oz support consistent milk portioning.
– Signature WPM slanted top lets the spout start close to the crema for a gentler, more controlled pour.
– Wider vessel is sized for 10 to 12oz drinks without excess milk.
– Full ergonomic handle stays comfortable across grip styles during extended service.
– Uncoated 304 (18/8) stainless steel interior is food safe and easy to clean.
RECOMMENDED FOR
– 10 to 12oz milk beverages, including lattes and to-go cups.
– Pours that call for crisp, defined, high-contrast lines.
– Detailed patterns on larger cup surfaces.
– Consistent milk portioning across two drink sizes.
– Café service paired with 10oz and 22oz pitchers for a complete bar flow.
– Home baristas moving up to medium and large cup sizes.
DESIGN PHILOSOPHY
WPM's approach to latte art equipment centers on matching the spout to the pour volume. Slow Pour Supply carries four pitcher sizes for this reason, each paired with a cup range: 10oz for cups under 6oz, 15oz for 6 to 10oz, 17oz for 8 to 12oz, and 22oz for 12 to 16oz. The 17oz size fills the medium to large range, where a pitcher needs enough volume for a full latte without giving up control.
The #21 applies that philosophy to definition. Its protruding round tip shapes the milk stream for crisp lines, while the slanted top and dual volume indicators bring the precise control WPM is known for to medium cup sizes. The 17oz pitcher is offered in several spout profiles, and the round tip is the choice for baristas who prioritize contrast and clean line work on larger canvases.
DESIGN FEATURES
PROTRUDING ROUND TIP #21 SPOUT
The #21 spout extends a round tip beyond the rim of the pitcher. This shape is designed for defined, high-contrast output, producing crisp lines rather than soft, diffuse ones. Combined with a more horizontal flow, the round tip gives greater surface coverage and room for expressive detail on larger cups.
SIGNATURE SLANTED TOP
The slanted top is original to WPM's pitcher design. It allows the pitcher to tilt nearly horizontal before milk begins to flow, which brings the spout close to the crema surface at the start of the pour. A lower starting point means a gentler initial contact and more control over where the milk lands.
DUAL VOLUME INDICATORS AT 6OZ AND 7.5OZ
Two milk volume indicators are integrated into the slanted top at 6oz and 7.5oz. They give baristas a visual reference while filling and steaming, which helps standardize milk portions from one drink to the next. Having two marks makes it easier to keep recipes consistent when moving between cup sizes during service.
WIDER VESSEL
The 17oz body uses a wider vessel that holds enough milk for 10 to 12oz drinks. Matching vessel size to the cup keeps milk volume appropriate for the pour and limits the amount of steamed milk left over afterward.
FULL ERGONOMIC HANDLE
The full handle is balanced for extended use and accommodates a range of grip styles. It keeps the pitcher stable from the initial tilt through the final lines, which matters more as milk volume and pitcher weight increase.
304 (18/8) STAINLESS STEEL CONSTRUCTION
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. It is designed to hold its shape through daily temperature swings and heavy commercial use. The interior is left uncoated, keeping it food safe and easy to clean after each shift.
BRUSHED STEEL FINISH PERFECT FOR COMMERCIAL SPACES
The exterior is finished in brushed steel for a clean, understated look on the bar, perfect for commercial use. The finish is applied to the exterior only, so the milk contacts uncoated stainless steel.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 17oz capacity is sized for 8 to 12oz cups and performs best on 10 to 12oz pours. This covers standard lattes and many to-go cups, keeping milk volume matched to the drink.
POURING CHARACTERISTICS
The protruding round tip delivers crisp, defined lines with a more horizontal flow. Paired with the slanted top, it allows a gentle, controlled start close to the surface, which supports high-contrast patterns with expressive detail across the larger surface of a medium to large cup.
WORKFLOW
The dual volume indicators make it simple to portion milk consistently during busy service. The 17oz size also pairs naturally with 10oz and 22oz pitchers, giving cafés a complete set that covers small, medium, and large drinks without forcing one pitcher to handle every cup size.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#21 |
|
SKU |
HC7121BK |
|
Capacity |
17oz |
|
Recommended Cup Size |
8 to 12oz, best suited to 10 to 12oz pours |
|
Spout |
#21 protruding round tip |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicators |
Dual milk volume indicators at 6oz and 7.5oz |
|
Handle |
Full ergonomic handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Matte black |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x 17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Matte Black.
CARE & MAINTENANCE
Wash the pitcher with soap and warm water after every shift, focusing on the interior. Milk contains fats, proteins, and sugars that rinsing alone will not remove, and residue left behind can harden and become difficult to clean. As milk spoils, it becomes more acidic, and prolonged exposure can wear down the protective layer of stainless steel.
After washing, dry the pitcher with a towel and leave it right side up to air out. Proper drying prevents water spots and protects the stainless steel over the long term. Avoid abrasive pads and harsh chemicals to protect the brushed steel finish.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 17oz capacity is designed for 8 to 12oz cups and is best suited to 10 to 12oz pours, including lattes and many to-go drinks.
WHAT DOES THE PROTRUDING ROUND TIP DO?
The round tip extends beyond the rim to shape a defined milk stream. It produces crisp, high-contrast lines and a more horizontal flow for greater surface coverage on larger cups.
WHAT ARE THE 6OZ AND 7.5OZ VOLUME INDICATORS FOR?
They are visual references for milk volume while filling and steaming. Using them helps keep portions consistent across drinks and reduces wasted milk.
HOW DOES THE SLANTED TOP IMPROVE MY POUR?
The slanted top lets you tilt the pitcher nearly horizontal before milk begins to flow. This brings the spout close to the surface for a gentler, more controlled start.
WHICH PITCHERS PAIR WELL WITH THE 17OZ?
The 17oz fits between WPM's 10oz and 22oz pitchers. Together they cover small, medium, and large cup sizes for a complete bar flow setup.
HOW SHOULD I CLEAN THIS PITCHER?
Wash with soap and warm water after every shift, then towel dry and leave it right side up to air out. Avoid abrasive pads and harsh chemicals to protect the finish.
The 17oz Latte Art Pitcher with Round Tip and Dual Volume Indicator in Brushed Steel brings WPM's slanted top and #21 protruding round tip to medium and large cups. With crisp, defined lines, dual volume indicators, and durable 304 stainless steel construction, it gives baristas a precise, dependable tool for high-contrast pours in daily service and practice.

Perfect for 8-12oz cups, these 17oz pitchers provide a horizontal and intentional flow. The result is a controlled flow enabling high definition and contrast in the cup. Available in tapered sharp, narrow, round tip, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
WPM 22oz Latte Art Pitcher with Wide Spout in Rose Gold
Regular price $53.25 Save $-53.25A wide-spout latte art pitcher in metallic rose gold, sized for larger milk drinks and bold, high-flow pours. The 22oz Latte Art Pitcher with Wide Spout in Rose Gold pairs WPM's signature slanted top with a wide-diameter body, giving baristas one pitcher that handles large to-go cups, milk sharing, and competition-style pours with clean, dramatic lines.
Built on WPM's #09 pitcher, the largest size in the Slow Pour Supply lineup, this edition combines an uncoated 304 (18/8) stainless steel interior with a metallic rose gold exterior. A 9.5oz milk volume indicator helps keep milk portions consistent from one drink to the next, whether you are pouring a single large latte or splitting milk between two cups.
WHY YOU'LL LOVE IT
– Wide #09 spout produces a fast, natural flow for bold lines and quick service pours.
– 22oz capacity is sized for 12 to 16oz cups, including large to-go drinks.
– 9.5oz milk volume indicator gives a visual reference for portioning and sharing milk.
– Signature WPM slanted top brings the spout closer to the crema, reducing the tilt needed to start a pour.
– Wide body diameter gives milk room to move during steaming for smoother microfoam.
– Full handle supports any grip style and keeps larger, heavier pours stable.
– Metallic rose gold exterior over an uncoated, food-safe stainless steel interior.
RECOMMENDED FOR
– 12 to 16oz milk beverages.
– Large to-go cups.
– Milk sharing between two drinks.
– High-volume café service.
– Bold, thicker-line patterns such as tulips, stacks, and wing base tulips.
– Competition and practice pours that call for a fast, dramatic flow.
DESIGN PHILOSOPHY
WPM's approach to latte art equipment centers on matching spout profile to pour volume. Slow Pour Supply carries four pitcher sizes for this reason, each paired with a specific cup range: 10oz for cups under 6oz, 15oz for 6 to 10oz, 17oz for 8 to 12oz, and 22oz for 12 to 16oz. The #09 sits at the top of that range, built for the drinks where a pitcher needs to move more milk without losing control.
The #09 spout was previously labeled as a round spout. As part of WPM's updated packaging, it is now designated Wide, a name that more accurately describes the spout-to-pitcher size ratio at 22oz. The pitcher's specifications and pouring performance are unchanged, so baristas familiar with the #09 round spout will find the same flow they already know.
DESIGN FEATURES
WPM #09 WIDE SPOUT
The #09 wide spout is designed for a fast, natural flow rate that supports high-contrast patterns with clean, dramatic lines. A higher flow lets baristas lay down bold, thicker lines and finish large drinks quickly, which keeps service moving during busy periods. It is one of WPM's most widely used spouts across commercial cafés and specialty coffee bars.
SIGNATURE SLANTED TOP
The slanted top is original to WPM's pitcher design and angles the milk stream toward the crema sooner. This reduces how far the pitcher must tilt before milk begins to flow, letting the spout sit closer to the surface for better definition and contrast. In a pitcher this size, less tilt also means a steadier start when the pitcher is full.
9.5OZ MILK VOLUME INDICATOR
A 9.5oz milk volume indicator gives baristas a visual reference while filling and steaming. It helps standardize milk portions across drinks, reducing waste and keeping recipes consistent. The indicator also makes it easier to judge an even split when sharing milk between two pitchers or two cups.
WIDE BODY DIAMETER
The wide body gives steaming milk more room to circulate. Better movement during texturing supports smoother, more even microfoam, which carries through to cleaner lines in the cup.
FULL HANDLE
The full handle accommodates a wide range of grip styles. At 22oz, a secure grip matters more, and the handle keeps the pitcher stable from the initial tilt through the final finishing lines.
METALLIC ROSE GOLD FINISH
The exterior is finished in metallic rose gold, giving the pitcher a distinctive look on the bar or the competition stage. The finish is applied to the exterior only, so it never comes into contact with milk.
304 (18/8) STAINLESS STEEL CONSTRUCTION
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. The interior is left uncoated, keeping it food safe and easy to clean after each use.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 22oz capacity is sized for 12 to 16oz cups, including large lattes and to-go drinks. Matching pitcher size to cup size keeps milk volume appropriate for the drink and avoids steaming far more milk than the pour requires.
POURING CHARACTERISTICS
The #09 wide spout delivers a fast, natural flow that favors bold, flowing lines over fine detail. Combined with the slanted top, it supports high-contrast patterns such as tulips, stacks, and wing base tulips with thicker lines across the larger surface of a big cup.
WORKFLOW
The pitcher's size and volume indicator make it practical for milk sharing, where one larger batch of steamed milk is divided between two drinks. The faster flow also helps shorten pour time on large to-go orders, keeping the bar moving without sacrificing presentation.
COMPETITION APPLICATIONS
The #09 is described by Slow Pour Supply as suited to both competition and service pours. Its predictable, high-flow stream supports routines built around bold patterns, and baristas who train on it during service can carry the same feel to the stage.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#09 |
|
Capacity |
22oz |
|
Recommended Cup Size |
12 to 16oz |
|
Spout |
Wide spout (previously designated round) |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicator |
9.5oz milk volume indicator |
|
Body |
Wide diameter |
|
Handle |
Full handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Metallic rose gold |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x 22oz Latte Art Pitcher with Wide Spout in Rose Gold.
CARE & MAINTENANCE
Hand wash the pitcher with warm water and a mild detergent after each use, focusing on the interior where milk residue collects. Dry it immediately with a soft cloth to prevent water spots on the rose gold finish. Avoid abrasive pads, harsh chemicals, or prolonged soaking, which can dull the exterior finish. Wipe the outside with a clean microfiber cloth to keep the metallic surface looking its best.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 22oz capacity is designed for 12 to 16oz cups, making it well suited to large lattes, to-go drinks, and milk sharing.
WHAT IS THE DIFFERENCE BETWEEN THE WIDE SPOUT AND THE ROUND SPOUT?
For the 22oz #09, there is no difference in the pitcher itself. WPM renamed the spout from round to wide to better describe the spout-to-pitcher size ratio at this size, and the specifications and performance remain the same.
WHAT PATTERNS DOES THE WIDE SPOUT SUPPORT?
The fast, natural flow suits bold, high-contrast patterns with thicker lines, such as tulips, stacks, and wing base tulips. It favors flowing lines over very fine detail.
WHAT IS THE 9.5OZ MILK VOLUME INDICATOR USED FOR?
It gives a visual reference for how much milk is in the pitcher while filling and steaming. This helps keep portions consistent and makes it easier to divide milk evenly when sharing between two drinks.
HOW SHOULD I CARE FOR THE ROSE GOLD FINISH?
Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads, harsh chemicals, and prolonged soaking to protect both the stainless steel interior and the metallic exterior.
The 22oz Latte Art Pitcher with Wide Spout in Rose Gold brings WPM's proven #09 pitcher and signature slanted top to the largest size in the lineup. With a fast, natural flow, a 9.5oz volume indicator, and a wide body for smooth steaming, it gives baristas a dependable tool for large drinks, milk sharing, and bold pours in both daily service and competition.

Our largest size. The 22oz pitcher is perfect for 12-16oz cups. This is the perfect pitcher for milk sharing or to go cup sizes. Available in narrow, and wide (previously categorized as round) options.
NARROW SPOUT

Lipped sharp, slightly rounded narrow spout enables finer lines without sacrificing the flow. This versatile pitcher is great for combination patterns, rosettas, stacks, wing base tulips, and any patterns that require finer lines with a medium flow rate. Available in 10, 15, 17, and 22oz pitchers.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in Moss Green "ROWAN"
Regular price $49.50 Save $-49.50The 15oz Slow Pour Supply® x WPM Latte Art Pitcher with Wide Spout in Moss Green "Rowan" is built for baristas who want bold, confident lines without sacrificing control. Its Model #22 Slow Pour Supply Signature Spout delivers a high, natural flow that suits busy service pours and dramatic, thick-line patterns in 6 to 10oz cups.
The Rowan is finished in a matte moss green inspired by evergreen mountains and hiking trails. It takes its name from the rowan, the wayfarer’s tree, long associated with protecting travelers and guiding them wherever they are going.
WHY YOU'LL LOVE IT
– Slow Pour Supply’s widest 15oz spout produces dramatic, bold lines with a very natural flow.
– High flow rate keeps service pours fast and consistent during busy periods.
– Sized for 6 to 10oz cups, including cappuccinos and small lattes.
– Built-in 6oz milk volume indicator helps standardize milk portions drink after drink.
– Signature WPM slanted top reduces the tilt needed to begin a pour.
– Wide body diameter gives milk room to circulate for smoother microfoam.
– Matte moss green powder coat over an uncoated, food-safe stainless steel interior.
RECOMMENDED FOR
– 6 to 10oz milk beverages.
– Fast, consistent café service pours.
– Wing base tulips and rosetta revolutions.
– Stacks and framed patterns built on thicker lines.
– Throwdowns and practice sessions focused on bold, high-contrast art.
ABOUT THE SLOW POUR SUPPLY X WPM COLLABORATION
The Rowan is part of Slow Pour Supply’s ongoing collaboration with WPM, pairing WPM’s pitcher manufacturing with spout and size combinations selected by Slow Pour Supply for specialty cup sizes. The Model #22 Signature Spout sits alongside the Periwinkle, Cinder, and Creamsicle editions, and Slow Pour Supply describes this wide spout and 15oz pairing as its most popular spout-size combination for service pours and throwdowns.
Slow Pour Supply WPM pitchers are used from neighborhood cafés to national competitions, and they have accompanied National Latte Art Champions, Barista Champions, and Coffeefest Latte Art World Championship Open winners on stage. The Rowan carries that same proven spout in a new colorway, named by Fernando Hernandez.
DESIGN FEATURES
SLOW POUR SUPPLY SIGNATURE WIDE SPOUT
The Model #22 Signature Spout is the widest spout Slow Pour Supply offers on a 15oz pitcher, sharing the same spout shape as the popular Periwinkle. Its broad opening releases milk at a high but natural rate, letting baristas lay down thick, defined lines with less effort. This makes it well suited to bold patterns and to service pours where speed and consistency matter.
SIGNATURE WPM SLANTED TOP
The slanted top is original to WPM’s pitcher design and angles the milk stream toward the crema sooner. Less tilt is needed before milk begins to flow, so the spout can sit closer to the surface for cleaner contact and better definition. On a 15oz pitcher, this supports a more horizontal flow and a less drastic initial contact with the cup.
6OZ MILK VOLUME INDICATOR
A 6oz milk volume indicator gives baristas a clear visual reference while filling and steaming. Consistent fill levels lead to consistent texture and pour volume, which reduces waste and keeps drinks uniform across a shift.
WIDE BODY DIAMETER
The wide body gives steaming milk more room to circulate. Better movement during texturing supports smoother, more even microfoam, which translates into cleaner lines and better contrast in the cup.
FULL HANDLE
The full handle accommodates any gripping style. It keeps the pitcher stable through the entire pour, from the initial tilt to the final finishing line.
MATTE MOSS GREEN POWDER COATED FINISH
The exterior is finished with a matte moss green powder coating and a laser-etched "SLOW POUR X WPM" logo. The coating is applied to the exterior only, so it never comes into contact with milk.
304 (18/8) STAINLESS STEEL CONSTRUCTION
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. The interior is left uncoated, keeping it food safe and easy to clean after each use.
PERFORMANCE
RECOMMENDED DRINK SIZES
Slow Pour Supply matches each pitcher size to a specific cup range, and the 15oz pitcher is designed for 6 to 10oz cups. Paired with the 6oz milk volume indicator, it is especially well matched to 6 to 8oz drinks, replacing a traditional 12oz pitcher with one that offers a more horizontal flow.
POURING CHARACTERISTICS
The wide spout delivers a high, natural flow that favors bold, flowing lines over very fine detail. Combined with the slanted top, it supports wing base tulips, rosetta revolutions, stacks, and framed patterns with thick, high-contrast lines.
WORKFLOW
A faster flow shortens pour time without making the stream hard to manage, which helps keep the bar moving during peak hours. The volume indicator and wide body support repeatable steaming, so each drink starts from the same milk quantity and texture.
COMPETITION APPLICATIONS
The Model #22 wide spout and 15oz combination is popular for throwdowns, where bold, quickly executed patterns stand out. Baristas who train on it during service can carry the same familiar flow into competition settings.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
Slow Pour Supply® x WPM |
|
Model |
#22 |
|
SKU |
7122ROWAN |
|
Capacity |
15oz |
|
Recommended Cup Size |
6 to 10oz |
|
Spout |
Slow Pour Supply Signature Wide Spout (same spout shape as Periwinkle) |
|
Flow Rate |
High |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicator |
6oz milk volume indicator |
|
Body |
Wide diameter |
|
Handle |
Full handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Matte moss green powder coating |
|
Branding |
Laser-etched "SLOW POUR X WPM" logo |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x 15oz Slow Pour Supply® x WPM Latte Art Pitcher with Wide Spout in Moss Green "Rowan."
CARE & MAINTENANCE
Wash the pitcher with warm water and soap after every shift, focusing on the interior where milk residue collects. Dry it thoroughly with a soft cloth, since proper drying extends the life of stainless steel kitchenware. Avoid abrasive pads, harsh chemicals, or prolonged soaking to protect the matte powder coated finish.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 15oz pitcher is designed for 6 to 10oz cups and includes a 6oz milk volume indicator, making it a natural fit for cappuccinos and small lattes.
HOW DOES THE WIDE SPOUT DIFFER FROM A ROUND OR NARROW SPOUT?
The wide spout is Slow Pour Supply’s widest option at 15oz and produces a high, natural flow for bold, thick lines. Round and narrow spouts deliver a more restrained flow suited to finer detail work.
IS THE ROWAN SPOUT THE SAME AS THE PERIWINKLE?
Yes. The Rowan uses the same Model #22 Signature Spout shape as the Periwinkle, as well as the Cinder and Creamsicle editions. The difference is the matte moss green finish.
WHAT PATTERNS DOES THIS PITCHER SUIT BEST?
It excels at wing base tulips, rosetta revolutions, stacks, and framed patterns, along with any design built on bold, high-contrast lines.
HOW SHOULD I CARE FOR THE MOSS GREEN FINISH?
Wash with warm water and soap, then dry thoroughly with a soft cloth. Avoid abrasive pads, harsh chemicals, and prolonged soaking to protect both the stainless steel interior and the powder coated exterior.
The 15oz Slow Pour Supply® x WPM Latte Art Pitcher with Wide Spout in Moss Green "Rowan" brings Slow Pour Supply’s most popular service spout to a calm, trail-inspired colorway. With a high, natural flow, a 6oz volume indicator, and WPM’s signature slanted top, it gives baristas a dependable tool for bold lines in daily service, practice, and throwdowns.

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
WIDE SPOUT

The Wide Spout is known for its dramatic yet very natural flow. Available only on our 22oz Wide Spout, 15oz Rowan, Cinder, Periwinkle, Creamsicle. This versatile pitcher can achieve very bold lines, and is the perfect pitcher for service pours. Great for wing based tulips and rosetta revolution, this pitcher is also great for stacks, and any framed patterns. A pitcher with a very high flow rate.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
Acrylic Matcha Whisk with Stand
Regular price $26.75 Save $-26.75A non-porous resin matcha whisk that comes apart to clean, for daily use at home and matcha drinks mixed with milk in café service
The Acrylic Matcha Whisk is a resin chasen made in Japan for commercial use. Its polypropylene tines are sturdy and resist bending under frequent use, and the whisk comes apart for thorough cleaning and drying. Because the resin does not absorb liquid, it is also a more hygienic choice wherever matcha is whisked with milk or other ingredients. It comes with an ABS plastic stand that keeps the whisk off the counter between uses.
Why a Resin Chasen Is the Hygienic Choice
Bamboo whisk breaks over time. Each session flexes the tines against the bowl, and over weeks of daily whisking they splay, soften, and snap, which leaves fewer working tines and a coarser, less stable foam. That means replacing the whisk on a regular schedule is necessary.
Bamboo is also a natural, porous material. It absorbs water along with whatever is mixed into the bowl, and residue that works into the fibers is difficult to rinse out. That matters most where matcha is whisked with milk, plant milk, sweeteners, or other ingredients, since milk and sugar left in a damp whisk spoil quickly.
Food safe polypropylene is non-porous, so milk, sugar, and matcha stay on the surface of the tines and rinse away instead of soaking in. It also holds its shape through repeated use, so the tines keep the spacing and stiffness the whisking stroke depends on.
Matcha residue tends to collect where the tines meet the handle, the part of any chasen that is hardest to rinse and slowest to dry. This whisk can be dismantled, so each part can be washed properly and set out to dry on its own before you put it back together.
Product Details
Whisking with the Resin Chasen
For a standard usucha, sift about 2g of matcha into a chawan, add 60 to 80ml of water at 70 to 80°C, and whisk from the wrist in a quick W or M stroke, keeping the tines just off the bottom of the bowl. Once a fine foam forms, slow down and draw the whisk up through the center to finish.
After whisking, rinse the whisk, take it apart, and let the parts dry fully. Reassemble it and rest it on the stand until the next session.
Using It in Café Service
On a café bar, one whisk might go from a straight usucha to a matcha latte whisked with milk, then to a drink built with plant milk or syrup. A resin whisk rinses clean between drinks, which helps keep milk residue from carrying over into the next order.
At the end of service, take the whisk apart and clean the base of the tines, where residue would otherwise build up, then let each part dry fully before the next shift.
The Whisk and Stand
• Non-porous polypropylene tines: The tines do not absorb liquid, so milk and other ingredients rinse out instead of soaking in, and they resist bending with frequent use.
• Dismantles for cleaning: The whisk comes apart, so residue at the base of the tines can be rinsed out and every part dried thoroughly.
• ABS plastic stand: Holds the whisk between uses, keeping the tines clear of the counter.
What's in the Box
• Whisk: Resin Whisk (Chasen) x 1
• Stand: Stand x 1
Specifications
|
Product Name |
Acrylic Matcha Whisk |
|
Weight |
16g by itself |
|
Material |
Chasen: polypropylene. Stand: ABS plastic |
|
Care |
Rinse after use. Take the whisk apart for thorough cleaning and let each part dry before storing. |
|
Origin |
Made in Japan (whisk and stand) |
|
Type |
Resin matcha whisk (chasen) with stand |
|
Suited For |
Daily usucha at home; café service, including matcha whisked with milk, plant milk, and other ingredients |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Differente Coffee - Pacamara Experimental Washed by Jhonatan Gasca
Regular price $66.00 Save $-66.00Part of an initiative to support Colombian coffee producers through a difficult period. Carlos Escobar will donate part of the proceeds to support the redevelopment of his home region in Colombia.
All coffee are final sale.
PACAMARA EXPERIMENTAL WASHED – JHONATAN GASCA
Pacamara Experimental Washed comes from Zarza Coffee in Bruselas, Huila, Colombia, where producer Jhonatan Gasca grows the Pacamara variety. Differente Coffee, the Colombian roastery founded by Carlos Escobar, selected and roasted this lot as part of its program of origin-focused Colombian coffees.
Lot details
- Farm: Zarza Coffee
- Region: Bruselas, Huila, Colombia
- Producer: Jhonatan Gasca
- Variety: Pacamara
- Process: Experimental Washed
- Roaster: Differente Coffee
Variety. Pacamara is a cross between Pacas and Maragogipe, first developed in El Salvador. It is known for its unusually large beans and distinctive sensory potential, which makes it a favorite among producers who want to push the boundaries of what a single variety can express.
Process. The washed process removes the skin and fruit from the seed and breaks down the remaining sticky layer, called mucilage, through fermentation. The coffee is then rinsed and dried in its parchment. Differente labels this lot “Experimental Washed,” which means the fermentation stage departs from a standard washed protocol. Jhonatan’s experimental washed approach explores how controlled fermentation can influence the expression of Pacamara.
In the cup. Differente deliberately don’t provide specific tasting notes for our coffees.
Carlos strongly believes coffee is a subjective experience. Everyone perceives flavors differently depending on their memories, culture, experiences, and personal preferences.
Differente doesn’t want to tell people what they should taste before taking their first sip. Instead, Carlos want them to explore and discover their own interpretation of each coffee.
That’s why Differente focus on describing the experience, intensity, character, and feeling behind each coffee rather than providing a list of flavors.
Their selection focuses on coffees that are far from ordinary. Carlos works with some of Colombia’s most innovative producers to showcase expressions of Colombian coffee that go well beyond what people traditionally expect.
About the Roaster – Carlos Escobar, Differente Coffee
Carlos Escobar is the son of a Colombian coffee farmer. He returned to coffee after 12 years in Australia, where he won the 2020 Australian Brewers Cup. He placed third at the 2025 World Brewers Cup in Jakarta, representing Colombia with Differente Coffee. On October 18, 2026, he won the Colombian Brewers Cup (Campeonato Colombiano de Cafés Filtrados) in Bogotá. This is his second Colombian national title, and it qualifies him to represent Colombia at the World Brewers Cup again. He founded Differente in Colombia to roast the country’s top lots where they are grown, instead of exporting them as green coffee.
Each coffee Carlos selects is roasted in Colombia, close to the farm that produced it.
Differente Coffee - Pink Bourbon Washed by Jhonatan Gasca
Regular price $64.00 Save $-64.00Part of an initiative to support Colombian coffee producers through a difficult period. Carlos Escobar will donate part of the proceeds to support the redevelopment of his home region in Colombia.
All coffee are final sale.
PINK BOURBON WASHED – JHONATAN GASCA
Pink Bourbon Washed comes from Zarza Coffee in Bruselas, Huila, Colombia, where producer Jhonatan Gasca grows the Pink Bourbon variety. Differente Coffee, the Colombian roastery founded by Carlos Escobar, selected and roasted this lot as part of its program of standout Colombian coffees. Where many of Differente’s lots push the limits of fermentation, this one takes a more traditional path, letting the variety and the land it grows on speak for themselves.
Lot details
- Farm: Zarza Coffee
- Region: Bruselas, Huila, Colombia
- Producer: Jhonatan Gasca
- Variety: Pink Bourbon
- Process: Washed
- Roaster: Differente Coffee
Process. The washed process removes the skin and fruit from the seed and breaks down the remaining sticky layer, called mucilage, through fermentation. The coffee is then rinsed and dried in its parchment. For this lot, Jhonatan follows a classic washed approach without highly experimental fermentation techniques. The goal is clarity and precision: a clean, transparent cup that shows the natural character of Pink Bourbon and the terroir of Bruselas, rather than flavors shaped by the processing.
In the cup. Differente deliberately don’t provide specific tasting notes for our coffees.
Carlos strongly believes coffee is a subjective experience. Everyone perceives flavors differently depending on their memories, culture, experiences, and personal preferences.
Differente doesn’t want to tell people what they should taste before taking their first sip. Instead, Carlos want them to explore and discover their own interpretation of each coffee.
That’s why Differente focus on describing the experience, intensity, character, and feeling behind each coffee rather than providing a list of flavors.
Their selection focuses on coffees that are far from ordinary. Carlos works with some of Colombia’s most innovative producers to showcase expressions of Colombian coffee that go well beyond what people traditionally expect.
About the Roaster – Carlos Escobar, Differente Coffee
Carlos Escobar is the son of a Colombian coffee farmer. He returned to coffee after 12 years in Australia, where he won the 2020 Australian Brewers Cup. He placed third at the 2025 World Brewers Cup in Jakarta, representing Colombia with Differente Coffee. On October 18, 2026, he won the Colombian Brewers Cup (Campeonato Colombiano de Cafés Filtrados) in Bogotá. This is his second Colombian national title, and it qualifies him to represent Colombia at the World Brewers Cup again. He founded Differente in Colombia to roast the country’s top lots where they are grown, instead of exporting them as green coffee.
Each coffee Carlos selects is roasted in Colombia, close to the farm that produced it.
WPM 15oz Latte Art Milk Pitcher with Round Spout - "Latte Art with a Soul"
Regular price $47.50 Save $-47.50The WPM 15oz Round Spout Latte Art Pitcher in Gloss White, “Latte Art with a Soul,” pairs WPM’s #06 round spout and slanted top with a gloss white body and a skull-and-lightning illustration. It is a milk pitcher sized for 6 to 8oz drinks, the range that covers flat whites, small lattes, and cappuccinos.
The Story Behind “Latte Art with a Soul”
Latte art usually gets talked about in terms of symmetry, contrast, and line definition. Anyone who has poured through a morning rush knows there is more to it than that. The name “Latte Art with a Soul” points at the part you cannot measure: the barista behind the pitcher, and the hundreds of practice pours that show up in a clean rosetta at 7am.
The illustration reads like a sheet of tattoo flash pinned up behind the bar. A black skull, drawn in profile with its jaw wide open, is the latte artist at full volume. White lightning bolts cut across the crown, the charge that hits when a pour finally comes together. A nail is driven into the side of the skull, a nod to the shorthand every barista knows for a pattern that lands exactly as planned: you nailed it.
Beneath the jaw, a single yellow bolt is the only color on the pitcher, set against bold black linework and the gloss white body. “LATTE ARTIST” runs horizontally beside the skull, so the pitcher says plainly who it was dedicated for.
How the #06 Round Spout Shapes Your Lines
The #06 is WPM’s round-profile spout. It lays down a medium-width ribbon of milk at a moderate, consistent flow rate, between #07 narrow spout #22 wide. A versatile spout for patterns like solid and ripple hearts, rosettas, stacked tulips, wing-base tulips, and swans.
Featuring original WPM slanted top design. The rim is angled rather than flat, which sets a defined exit point for the milk and lets you tilt the pitcher closer to horizontal before the pour begins. When it is time to draw, the spout can sit about a centimeter above the surface.
Pouring that close makes the first contact between milk and crema less abrupt. The microfoam rides on top instead of diving, so the pattern sets with brighter whites against a deeper brown base.
WPM pitchers are a regular sight on the competition stage, used by national latte art champions, barista champions, and Coffee Fest Latte Art World Championship Open winners.
Product Details
Steaming and Pouring with the 15oz
Fill to the 6oz indent on the interior wall before you steam. That volume leaves room for a short stretch to build air and a longer roll to polish it into glossy microfoam, without the milk climbing the spout as it expands. Starting from the same line each time keeps foam depth and the milk-to-espresso ratio repeatable from drink to drink.
The full handle wraps around the back of the body, so it holds securely whether you pinch high near the rim or grip lower for more leverage on the tilt.
Slow Pour Supply pairs the 15oz round spout pitcher with ORIGAMI latte bowls in its Barista Latte Art Sets, including the ORIGAMI Latte Bowl with Saucer Set (10oz).
The Spout and Body
• #06 round spout: A medium line width at a moderate, consistent flow, for hearts, rosettas, and tulips with clean definition.
• Slanted top: The angled rim lets the pitcher tilt further before milk exits, bringing the spout within about 1cm of the crema.
• 6oz volume indent: An internal marking for a measured fill, sized for 6 to 8oz cups.
What’s in the Box
• Pitcher: WPM 15oz Round Spout Latte Art Pitcher in Gloss White, “Latte Art with a Soul” x 1
Specifications
|
Brand |
WPM |
|
Product Name |
15oz Round Spout Latte Art Pitcher in Gloss White, “Latte Art with a Soul” |
|
Weight |
193 grams net |
|
Material |
Food-grade 304 stainless steel body with gloss white exterior finish (coating type TBC) |
|
Care |
Hand wash and wipe dry |
|
Origin |
China |
|
Capacity |
15oz (450ml), with 6oz internal volume indent |
|
Cup Size |
6 to 8oz drinks: flat white, small latte, cappuccino |
|
Spout |
WPM #06 round spout with slanted top; Push and Flow category, Service Pour series |
|
Handle |
Full Ergonomic handle |
|
Color |
Gloss White body and handle |
|
Artwork |
Black skull in profile with lightning bolts and a nail, yellow bolt accent, “LATTE ARTIST” lettering |

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
― David Orr
ROUND SPOUT

Lipped round spout for bolder lines, this pitcher is great for thicker lines - slozettas, rosetta revolution, tulips, wing bases with thicker lines, and stacks. This pitcher is great for a higher flow rate. Available in our 10oz and 15oz pitchers
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
20oz WPM x KJ Latte Art Pitcher in #67 Competition Spout - Matte Black
Regular price $76.00 Save $-76.00Designed in collaboration with KJ, the 2024 Hong Kong Latte Art Champion and WLAC Semi-Finalist, this pitcher is the newest addition to our #30 Competition Series—crafted for baristas aspiring to elevate their free-pour artistry.
Precision Spout Design
The finely engineered narrow spout delivers unparalleled control, enabling intricate line work and keeping your foam "wet" longer. Perfect for executing sharp, visually striking designs with ease.
Unmatched Stability
Engineered for stability, the fine-tip spout reduces unnecessary hand movement, allowing for smoother, more consistent pours and flawless leaf creation.
Ergonomic and Comfortable
The thoughtfully designed handle offers a secure, ergonomic grip, minimizing hand fatigue. Ideal for extended practice or high-pressure competitions, it ensures comfort with every pour.
Lightweight Yet Durable
With a weight of just 187g and a capacity of 600mL, this pitcher strikes the perfect balance between lightweight usability and long-lasting durability, making it a reliable choice for professionals and enthusiasts alike.
Enhanced Foam Longevity
Keep your foam silky and stable for extended periods, allowing you to focus on crafting intricate designs. Designed to perform best at 60°C, this pitcher ensures your latte art stays crisp and captivating until the final pour.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
DragonFly Design Center “Caisson Ceiling” CC62 Dripper (with CT62 Groove)
Regular price $50.00 Save $-50.00Coming soon - sign up for notification
A 62° conical dripper with carved guide grooves, built to hold a steady drawdown from bloom to finish
On a small-dose cone, balance depends on how evenly the slurry drains. Water that bypasses the bed, or a flow that chokes near the outlet, pulls the cup toward under- or over-extraction.
The “Caisson Ceiling” CC62 Dripper from DragonFly Design Center is a new bone china conical dripper built on the CT62 interior, pairing a 62° cone with recessed guide grooves to keep the flow rate consistent through the brew. It brews 1-2 cups with small conical filters and comes in Pink and Green.
How the CC62 Manages Flow
At 62°, the cone wall holds the paper in close contact, limiting bypass so the water you pour travels through the coffee bed rather than around it.
Where most conical drippers use raised ribs, the CC62 carves its channels into the wall. Water runs down these recessed longitudinal grooves, and a ring of channels at the base meters the outflow at the bottom of the cone.
The placement of that ring of channels, together with the shape and depth of the bottom cross-section, governs the final stage of the brew, when the bed settles toward the outlet. The result is a flow rate that neither rushes early nor stalls late, avoiding the bitterness and astringency of over-extraction and the sharp sourness of under-extraction.
Product Details
Brewing with the CC62
It takes 1 to 2 cup cone filters, including ORIGAMI 1-2 cup filters, Sibarist Cone S, and Hiflux Folding V 01.
The new bone china body is heat resistant to 120°C (248°F) and dishwasher safe.
The CT62 Groove Interior
• 62° cone: Shared with the CT62, holding the paper close to the wall.
• Recessed longitudinal grooves: Carved into the wall in place of raised ribs.
• Transverse base ring: Regulates outflow at the bottom of the cone.
The Bamboo Weave Exterior and the Caisson Ceiling Name
The exterior is based on a Chinese bamboo weaving technique, with strips interlaced horizontally and vertically in dense layers. Designed for the Year of the Snake, the weave’s outermost strip becomes a snake’s body.
Inverted and viewed from above, the pattern resembles a caisson ceiling, a structure that ancient Chinese architecture reserved for prestigious buildings. Like bamboo weaving, it is both structural and decorative, and the dripper takes its name from it.

What’s in the Box
• Dripper: DragonFly “Caisson Ceiling” CC62 Dripper x 1
Specifications
|
Brand |
DragonFly Design Center |
|
Product Name |
“Caisson Ceiling” CC62 Dripper (with CT62 Groove) |
|
Weight |
TBC |
|
Dimensions |
113mm top diameter x 30mm bottom diameter x 70mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
Made in China |
|
Capacity |
1 to 2 cups |
|
Filter |
1 to 2 cup cone filter: ORIGAMI 1-2 cup, Sibarist Cone S, Hiflux Folding V 01 |
|
Cone Angle |
62° |
|
Heat Resistance |
Up to 120°C (248°F) |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in Creamsicle
Regular price $49.25 Save $-49.25The 15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in Creamsicle is built for baristas who want a fast, natural flow for bold, high-contrast latte art. It pairs Slow Pour Supply's signature Model #22 wide spout with WPM's slanted top and wide-diameter body, a spout and size combination that has become a favorite for service pours and latte art throwdowns.
Released as a 2024 colorway, Creamsicle features a summer-like pastel peach exterior over an uncoated, food-safe 304 (18/8) stainless steel interior. A 6oz milk volume indicator and a full handle complete a pitcher designed for consistent results from the morning rush to the competition stage.
WHY YOU'LL LOVE IT
– Slow Pour Supply's widest spout produces bold, dramatic lines with a fast, natural flow.
– Shares the same Model #22 spout shape as the popular Periwinkle, Rowan, and Cinder pitchers.
– 15oz capacity is matched to 6 to 10oz cups, Slow Pour Supply's most popular pitcher size.
– 6oz milk volume indicator helps keep milk portions consistent from drink to drink.
– Signature WPM slanted top creates a more horizontal flow and a gentler first contact with the crema.
– Wide body diameter gives milk room to circulate during steaming.
– Full handle supports any grip style for stable, repeatable pours.
– Pastel peach Creamsicle exterior with a laser-etched "SLOW POUR X WPM" logo.
RECOMMENDED FOR
– 6 to 10oz milk beverages, with 6 to 8oz cups as the sweet spot.
– High-volume café service pours.
– Latte art throwdowns and competition practice.
– Tulips, wing base tulips, and rosetta revolutions.
– Stacks and framed patterns that call for thick, confident lines.
– Replacing a traditional 12oz pitcher for a more horizontal pouring angle.
ABOUT THE SLOW POUR SUPPLY® X WPM COLLABORATION
Slow Pour Supply has supported the specialty coffee community since 2018 as a distributor of latte art pitchers and brewing equipment. Its collaboration with WPM pairs WPM's established pitcher bodies and signature slanted top with Slow Pour Supply's own spout profiles, colorways, and branding.
The Model #22 Slow Pour Supply Signature Wide Spout sits at the center of that partnership. It is available only on the 15oz Rowan, Cinder, Periwinkle, and Creamsicle pitchers and on Slow Pour Supply's 22oz wide spout pitcher. According to Slow Pour Supply, this spout and size combination is its most tried and tested for service pours and throwdowns, and it has accompanied many baristas to wins at the Coffee Fest Latte Art Championship Open. Creamsicle brings that same spout to a pastel peach colorway released in 2024.
DESIGN FEATURES
MODEL #22 SLOW POUR SUPPLY SIGNATURE WIDE SPOUT
The wide spout is the widest profile in Slow Pour Supply's pitcher lineup and shares the same spout shape as the Periwinkle pitcher. It produces a very high flow rate that still feels natural in the hand, letting baristas lay down bold, dramatic lines without forcing the pour. That combination makes it equally useful for quick service pours and for patterns built on thick, well-defined layers.
SIGNATURE WPM SLANTED TOP
The slanted top is a defining detail of WPM's pitcher design. It angles the milk stream toward the cup sooner, producing a more horizontal flow and a less drastic initial contact with the crema. A gentler start helps the milk sit on the surface rather than diving beneath it, which gives the finished pattern more contrast and higher color definition.
6OZ MILK VOLUME INDICATOR
A 6oz milk volume indicator gives a clear visual reference while filling and steaming. It helps standardize milk portions across drinks, which reduces waste and keeps recipes consistent during service. For baristas training on patterns, a repeatable milk volume also removes one variable from practice.
WIDE BODY DIAMETER
The wide body gives milk more room to move while steaming. Better circulation during texturing supports smoother, more even microfoam, and it also makes it easier to see how foam is distributed before the pour begins.
FULL HANDLE
The full handle accommodates any gripping style, from a relaxed hold to a firm, controlled grip. It keeps the pitcher stable from the initial tilt through the final finishing line, which matters when a fast-flowing spout leaves little room for hesitation.
CREAMSICLE PASTEL PEACH FINISH
Creamsicle is finished in a summer-like pastel peach, giving the pitcher a distinctive presence on the bar or the competition stage. The color is applied to the exterior only, so the interior that holds milk remains bare stainless steel.
LASER-ETCHED SLOW POUR X WPM LOGO
A laser-etched "SLOW POUR X WPM" logo identifies the pitcher as part of the collaboration. Etching marks the surface directly rather than adding a printed layer that can wear with handling.
304 (18/8) STAINLESS STEEL CONSTRUCTION
The pitcher is built from 304 (18/8) stainless steel, a food-grade alloy valued for its corrosion resistance. The interior is left uncoated, keeping it food safe and easy to clean after every shift.
PERFORMANCE
RECOMMENDED DRINK SIZES
Slow Pour Supply recommends its 15oz pitchers for 6 to 10oz cups, and it notes that this size is especially well suited to 6 to 8oz drinks. Matching pitcher size to cup size keeps milk volume appropriate for the drink and avoids steaming far more milk than the pour requires. The 15oz is Slow Pour Supply's most popular size.
POURING CHARACTERISTICS
The wide spout delivers a dramatic yet natural, high-volume flow that favors bold lines over very fine detail. Combined with the slanted top, it supports tulips, wing base tulips, rosetta revolutions, stacks, and framed patterns with clean, thick definition. Baristas who want delicate, fine lines may prefer a narrow spout profile instead.
WORKFLOW
A faster flow shortens pour time, which keeps tickets moving during busy service without giving up presentation. The 6oz volume indicator supports consistent portioning, so each drink starts from the same amount of milk.
COMPETITION APPLICATIONS
The Model #22 wide spout is one of Slow Pour Supply's go-to choices for throwdowns, and Slow Pour Supply reports that it has accompanied many winners of the Coffee Fest Latte Art Championship Open. Its predictable, high-flow stream suits routines built around bold patterns, and baristas who train on it during service can carry the same feel to the stage.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
SLOW POUR SUPPLY® x WPM |
|
Model |
#22 |
|
Capacity |
15oz |
|
Recommended Cup Size |
6 to 10oz |
|
Spout |
Slow Pour Supply Signature Wide Spout |
|
Top Design |
Signature WPM slanted top |
|
Volume Indicator |
6oz milk volume indicator |
|
Body |
Wide diameter |
|
Handle |
Full handle |
|
Material, Interior |
304 (18/8) stainless steel, uncoated, food safe |
|
Finish, Exterior |
Creamsicle pastel peach |
|
Branding |
Laser-etched "SLOW POUR X WPM" logo |
|
Colorway Release |
2024 |
|
SKU |
7122PF |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x 15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in Creamsicle.
CARE & MAINTENANCE
Wash the pitcher with warm water and soap after every shift, focusing on the interior. Milk contains fats, proteins, and sugars that can leave residue when only rinsed with water, and that residue can harden over time. As milk spoils, lactose ferments into lactic acid, which can gradually wear down the protective layer of stainless steel.
After washing, dry the pitcher with a towel and leave it right side up to air out. Water left on stainless steel can cause water spots and may encourage corrosion over the long term. Avoid abrasive pads and harsh chemicals to protect the Creamsicle exterior finish.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 15oz capacity is designed for 6 to 10oz cups, and Slow Pour Supply notes that it is especially well suited to 6 to 8oz drinks.
IS THE CREAMSICLE SPOUT THE SAME AS PERIWINKLE, ROWAN, AND CINDER?
Yes. Creamsicle uses the same Model #22 Slow Pour Supply Signature Wide Spout shape as Periwinkle, Rowan, and Cinder. The pitchers differ in colorway, not in pouring performance.
HOW DOES THE WIDE SPOUT COMPARE TO A ROUND SPOUT?
The wide spout is Slow Pour Supply's widest profile and produces a higher flow rate than its regular round spout. That extra flow makes it easier to lay down bold, dramatic lines and to finish service pours quickly.
WHAT LATTE ART PATTERNS DOES THE WIDE SPOUT SUPPORT?
The fast, natural flow suits tulips, wing base tulips, rosetta revolutions, stacks, and framed patterns. It favors bold, thick lines over very fine detail work.
WILL THE COLOR LOOK EXACTLY LIKE THE PRODUCT PHOTOS?
Colors can appear slightly different depending on your screen and the lighting at the time a photo was taken. The Creamsicle finish may also look warmer or cooler under different light sources, such as fluorescent or warm-toned bulbs.
HOW SHOULD I CLEAN THE PITCHER?
Wash with warm water and soap after every shift, focusing on the interior, then dry with a towel and leave it right side up to air out.
The 15oz SLOW POUR SUPPLY® x WPM Latte Art Pitcher with Wide Spout in Creamsicle brings Slow Pour Supply's signature wide spout and WPM's slanted top together in a bright 2024 colorway. With a fast, natural flow, a 6oz volume indicator, and a wide body for smooth steaming, it gives baristas a dependable tool for bold service pours, throwdowns, and competition practice.

Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
WIDE SPOUT

The Wide Spout is known for its dramatic yet very natural flow. Available only on our 22oz Wide Spout, 15oz Rowan, Cinder, Periwinkle, Creamsicle. This versatile pitcher can achieve very bold lines, and is the perfect pitcher for service pours. Great for wing based tulips and rosetta revolution, this pitcher is also great for stacks, and any framed patterns. A pitcher with a very high flow rate.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
Acaia Titan Brew Stand
Regular price $150.00 Save $-150.00Built for brewers who want the weight of the beverage alone. The Titan elevates your dripper or AeroPress above the scale, isolating exactly what you need to measure and nothing else. Constructed from sturdy aluminum alloy, it's rigid enough to handle the downward force of an AeroPress press without compromising your reading. Assembles easily and sits cleanly over any Pearl series scale.
Precise by design. Straightforward by intention.
Care: Wipe clean with a damp cloth. Do not use abrasive cleaners. Handle with care to preserve the aluminum alloy finish. Do not press an AeroPress directly onto the scale surface.
Product Specs
Material: Aluminum alloy
Compatible With: Pearl series scales
Compatible Brewers: Drippers, AeroPress
Function: Beverage weight isolation
Assembly: Tool-free
Note: Do not press AeroPress directly onto the scale
Country of Origin: Taiwan
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
MOTORS x APAX LAB limited Edition 20ml
Regular price $28.00 Save $-28.00APAX LABS x MOTORS COFFEE
Clarity – Florals – Terroir Expression
Apax Lab has joined forces with Motors Coffee to bring you a collaborative mineral profile in a 20 mL format.
Inspired by Motors Coffee’s role in redefining Parisian specialty coffee, this limited-edition profile reflects a shared passion for precision, curiosity, and pushing the boundaries of flavour. Known for highlighting bright, expressive coffees from leading roasters around the world, Motors continues to elevate the coffee experience through innovation.
This MOTORS x APAX LAB profile is designed to highlight terroir, enhance clarity, and unlock vibrant floral notes. The mineral balance allows each cup to express the coffee’s true origin and complexity with precision and transparency.
Please click here to download APAX LAB user guide
TANAT x APAX LAB Lucid [2.1] Mineral Concentrate in 20ml
Regular price $28.00 Save $-28.00Lucid [2.1] is a mineral concentrate developed to sharpen aromatic clarity and brightness in the brews of light roast coffee.
A light roast shows what it's made of in the details you can taste past the surface: the fruit, the florals, the fine acidity that either comes through clean or gets lost in translation. Water plays a larger part in that outcome than most brewers give it credit for. Lucid [2.1] is a mineral concentrate designed to work with a clean, expressive, bright roasting style, sharpening the aromatics and the finish rather than covering them up.
A Collaboration with APAX LAB
Lucid [2.1] was co-created with APAX LAB, an Australian company that designs high-precision mineral concentrates for coffee. Their work centers on isolating the mineral ratios that shape how aroma and acidity present in the cup, then concentrating them into a form that's simple to dose and easy to repeat.
Paired with TANAT's roasting approach, Lucid [2.1] was tuned to bring out what a bright, expressive light roast is built to show: clearer aromatics, elevated brightness, and a more refined finish. The result is a cup that reads as clean and precise, without asking the brewer to change anything else about how they already brew.
How to Use
Shake well before use, so the concentrate is evenly mixed.
Dose per cup add 1 to 2 drops to a cup of freshly brewed coffee, about 200 ml.
Water Remineralization
Lucid [2.1] can also be used to remineralize brewing water directly. Add it to distilled water at a rate of 1.5 to 2.5 grams per liter, ahead of brewing, for a version of the same clarity built into the water itself.
What's in the Box
Lucid [2.1] Mineral Concentrate x 1 bottle size TBC, confirm with supplier before publishing.
Ingredients: Water, magnesium chloride, magnesium sulfate, magnesium citrate, potassium chloride, potassium bicarbonate, sodium bicarbonate.
Please click here to download APAX LAB user guide
ORIGAMI Asymmetry Cup - 7.4 oz
Regular price $24.50 Save $-24.50A porcelain tasting cup with a thin rim on one side and a thick rim on the other, so you can read acidity and aroma from one edge and body and texture from the other
When you evaluate a coffee at the brew bar or on a cupping table, the cup is part of the assessment. Rim thickness changes how the liquid enters the mouth: how much arrives at once, how fast it moves, and where it lands on the palate. That decides whether acidity and aromatics register first, or sweetness and body.
The ORIGAMI Sensory Asymmetry Cup is a porcelain cup from ORIGAMI's Sensory Series, made in Japan with a rim that is thin on one side and thick on the other. Turn it in your hand and you taste the same coffee two ways, with a comfortable fit at the lip from either side. It comes in White and Black.
How the Sensory Asymmetry Cup Changes the Sip
ORIGAMI shaped the cup around where coffee travels on the tongue. Sipped from the thin side, the coffee flows toward the back of the tongue. According to ORIGAMI, this brings forward aroma and floral notes, makes acidity easier to perceive, and draws out the finish.
Sipped from the thick side, the coffee lands at the front and center of the tongue. ORIGAMI describes the result as sweeter and richer, with heavier body and more texture. The outer wall follows the change in rim thickness, so the foot sits visibly offset from one side to the other.
The Sensory Series is ORIGAMI's professional line, made for baristas who serve in competition. In a judged service or at the café bar, you can suggest a drinking side to match the coffee in front of the guest: its origin, process, roast level, or whether it is served with milk.
Product Details
Serving with the Sensory Asymmetry Cup
Pour your brew into the cup, taste from the thin side, then turn it and taste from the thick side. In a tasting flight, this gives you two readings of one coffee from a single vessel, which is useful when you are dialing in a recipe or calibrating with your team.
ORIGAMI suggests serving it with a teaspoon set on the saucer, so the guest can stir as they drink and pick up more of the coffee's aroma and flavor as it cools.
The porcelain body is heat resistant to 120°C (248°F) and safe for dishwashers and microwave ovens.
The Asymmetric Rim
• Thin side: Directs coffee toward the back of the tongue, bringing forward acidity, aromatics, and a longer finish.
• Thick side: Places coffee at the front and center of the tongue for more sweetness, body, and texture.
The Kiln-Fired Rim and Sensory Colors
The cup is fired in the kiln mouth down. This leaves the rim unglazed, so your lip meets bare porcelain at the edge while the rest of the body carries a full glaze.
It is offered in White and Black, the two colors of the Sensory Series. The black cup works as a blind: it hides the color of the liquid, so the taster reads aroma and flavor without visual cues shaping their expectations.
What's in the Box
• Cup: ORIGAMI Sensory Asymmetry Cup (220ml) x 1
Specifications
|
Brand |
ORIGAMI |
|
Product Name |
Sensory Asymmetry Cup (220ml) |
|
Weight |
Approx. 210g net (gross, packaged: TBC) |
|
Dimensions |
90mm (Φ) x 88mm (W) x 73mm (H), 50mm foot diameter |
|
Material |
Porcelain, glazed body with unglazed rim |
|
Care |
Dishwasher safe. Also safe in microwave ovens. |
|
Origin |
Made in Japan |
|
Capacity |
220ml when full (approx. 7.4 fl oz) |
|
Heat Resistance |
Up to 120°C (248°F) |
|
Collection |
ORIGAMI Sensory Series |
|
Color |
White, Black |
We work very diligently to provide products that are clean and in unused conditions. In observance of the current situation, we will not be able to accept return of cups and sip-wares.
We appreciate your understanding.Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Knot Knot x WPM 600cc / 20oz Free Pour Latte Art Competition Pitcher
Regular price $52.00 Save $-52.00Revolutionary-smooth foam roll - perfect for any drawing style
The WPM #30 600cc flat top pitcher is a collaborative creation with Bangkok-based barista Knot Knot. This limited edition pitcher is designed for competition, blending WPM's expertise with Knot Knot's artistic touch.
This pitcher focuses on optimizing the commonly available pitcher design - incorporating new elements to functionally improve the common flat top pitcher.
The spout of this flat top pitcher has been redesigned to provide a flow that benefits mix foam use. Excellent for drawing style, its round-bottom design enables a smooth rollover of foam - and latte artists are able to fully utilize every drop of milk for their pours.
At 600cc / 20oz size - this pitcher is perfect for pouring 10oz combination pour style patterns. The lengthened spout at a carefully designed angle works in tandem with a specially designed spout for a controlled flow.
- The curved base promotes a larger vortex during frothing, ensuring smoother foam transition and consistent microfoam.
- An elongated spout facilitates precise drawing and controlled pouring.
- A slanted top design incorporates a volume gauge for exacting volume control.
- The ergonomic handle accommodates diverse gripping styles, ensuring supreme comfort and command during pouring.
- Crafted from premium 304 18/8 stainless steel, this pitcher guarantees enduring durability and performance.
Volume: 600cc/ 20oz
Color: Matte Black
Angled handle for a natural, pencil-like grip
Are you interested in showcasing your drawing style latte art with this pitcher?
Contact and provide us with your drawing style (combo pour / etched pour) latte art portfolio to work with us on product review and testing. Email to support@slowpoursupply.co for more details!
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
WPM 17oz Competition Pitcher with Long Spout in Brushed Steel
Regular price $45.00 Save $-45.00Revolutionary-smooth foam roll - perfect for any drawing style
The 17oz Brushed Steel Competition Pitcher (#37) with Long Spout was developed for baristas who work in drawing style latte art and need precise control over how foam leaves the pitcher. The #37 built on the WPM #39 with a 500cc flat top body, it pairs a lengthened, carefully angled spout with a redesigned round-bottom profile that lets foam roll over the lip smoothly during combination pours.
Sized for 8oz combination pour drinks and finished in brushed steel, the #37 refines the familiar flat top pitcher rather than replacing it. An angled handle supports a natural, pencil-like grip, giving the fine, deliberate control that detailed drawing and etched pours depend on.
WHY YOU'LL LOVE IT
– Round-bottom spout lets foam roll over the lip smoothly, so more of the milk in the pitcher can be used in the pour.
– Lengthened spout, set at a carefully designed angle, delivers a controlled flow for combination pour patterns.
– Spout geometry redesigned specifically for mixed foam use in drawing style latte art.
– 500cc / 17oz capacity is sized for 8oz combination pour drinks.
– Angled handle supports a natural, pencil-like grip for fine placement and detail work.
– Flat top body keeps the familiar feel of a common pitcher while improving how it performs.
– Brushed steel exterior gives the pitcher a clean, understated look on the bar or competition stage.
RECOMMENDED FOR
– 8oz combination pour beverages.
– Drawing style latte art.
– Combination pour and etched pour work.
– Latte art competition routines and practice sessions.
– Café service in 8 to 12oz cups.
– Baristas refining foam control for detailed, multi-element designs.
DESIGN PHILOSOPHY
The WPM #37 starts from a simple idea: the common flat top pitcher already works, so the goal is to improve it functionally rather than reinvent it. WPM kept the flat top body that baristas know and focused its changes on the elements that most affect foam movement, the spout profile and its angle. The same approach shapes WPM's 600cc #30 flat top pitcher, and the #37 applies it in a smaller 500cc format.
Drawing style latte art asks something different of a pitcher than a standard free pour. Foam needs to leave the spout smoothly and predictably so it can be placed, layered, and then refined. The #39 spout was redesigned around that mixed foam workflow, with a round-bottom shape for smooth rollover and a lengthened, angled profile that keeps the flow controlled.
DESIGN FEATURES
WPM #37 FLAT TOP
The #37 is built on a 500cc flat top body base the on #39 model, the familiar pitcher shape found behind most espresso bars. Keeping this body means baristas moving from a standard pitcher can adapt quickly, since the balance and handling feel recognizable. The improvements are concentrated in the spout, where they have the greatest effect on the pour.
ROUND-BOTTOM SPOUT PROFILE
The spout has a rounded bottom rather than a sharp or pinched channel. This shape allows foam to roll over the lip smoothly instead of breaking or catching at the edge. For drawing style work, a smooth rollover means foam arrives in the cup consistently, and baristas can make full use of the milk in the pitcher for their pour.
LENGTHENED, ANGLED SPOUT
The spout is lengthened and set at a carefully designed angle. It works together with the round-bottom profile to produce a controlled flow, letting the barista place foam deliberately rather than fight a fast or unpredictable stream. That control is especially useful in combination pours, where several elements must be positioned accurately in a single cup.
ANGLED PENCIL-GRIP HANDLE
The handle is angled to support a natural, pencil-like grip. Holding the pitcher this way brings fine wrist and finger control into the pour, similar to drawing with a pen. This helps with small adjustments in placement and flow that detailed drawing style patterns require.
BRUSHED STEEL, UNCOATED FINISH
The uncoated exterior has a brushed steel finished suitable for commercial use. The non-reflective surface gives the pitcher a clean, understated appearance that is fingerprint friendly, suits both café service and the competition stage.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 500cc (17oz) capacity is designed for 8oz combination pour style drinks. Within Slow Pour Supply's pitcher lineup, the 17oz size is matched to 8 to 12oz cups, keeping the steamed milk volume appropriate for the drink and limiting waste.
POURING CHARACTERISTICS
The lengthened spout and round-bottom profile work together to deliver a controlled flow with a smooth foam rollover. Foam leaves the pitcher predictably, which supports accurate placement and helps the barista use the milk in the pitcher efficiently through the final stages of the pour.
DRAWING STYLE AND ETCHED POURS
Because the spout was redesigned for mixed foam use, the #39 suits drawing style latte art, including combination pours and etched pours. The smooth rollover lays down foam cleanly for later detail work, and the pencil-like grip supports the precise movements these designs require.
COMPETITION APPLICATIONS
Controlled flow, a familiar flat top body, and an 8oz-focused capacity make the #39 a practical tool for latte art competition routines built around combination and drawing style patterns. Baristas who practice with it during service can carry the same feel to the stage.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#37 |
|
Capacity |
500cc (17oz) |
|
Recommended Drink Size |
8oz combination pour beverages |
|
Recommended Cup Range |
8 to 12oz (Slow Pour Supply 17oz pitcher class) |
|
Top Design |
Flat top |
|
Spout |
Long spout with redesigned round-bottom profile |
|
Handle |
Angled handle for a pencil-like grip |
|
Finish, Exterior |
Brushed Steel |
|
SKU |
7137ST |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x WPM 17oz Competition Pitcher with Long Spout in Brushed Steel.
CARE & MAINTENANCE
Wash the pitcher with soap and warm water after every use or shift, focusing on the interior. Milk contains fats, proteins, and sugars that leave residue, and soap breaks down fats that water alone cannot remove. As milk spoils, lactose ferments into lactic acid, which can slowly wear down the protective layer of stainless steel if residue is left to sit.
After washing, dry the pitcher with a towel and leave it right side up to air out. Water left on stainless steel can cause water spots and may encourage corrosion over time. Avoid abrasive pads and harsh chemicals to protect the brushed steel exterior.
FREQUENTLY ASKED QUESTIONS
WHAT DRINK SIZE IS THIS PITCHER DESIGNED FOR?
The 500cc (17oz) capacity is designed for 8oz combination pour style drinks. It also falls within Slow Pour Supply's 17oz pitcher class, which is matched to 8 to 12oz cups.
WHAT MAKES THIS PITCHER SUITED TO DRAWING STYLE LATTE ART?
Its spout was redesigned for mixed foam use. The round-bottom profile lets foam roll over the lip smoothly, and the lengthened, angled spout keeps the flow controlled, which supports the precise foam placement that combination and etched pours rely on.
HOW IS THE #39 DIFFERENT FROM WPM'S SLANTED TOP PITCHERS?
The #39 uses a flat top body, the familiar shape of a common milk pitcher, rather than WPM's signature slanted top. Its performance improvements come from the redesigned long spout and angled handle instead of the rim design.
WHAT DOES THE ANGLED HANDLE DO?
The handle is angled to support a natural, pencil-like grip. This grip brings finer finger and wrist control into the pour, which helps with small, deliberate movements in detailed patterns.
HOW SHOULD I CLEAN THE PITCHER?
Wash it with soap and warm water after every use or shift, focusing on the interior. Dry it with a towel, then leave it right side up to air out to prevent water spots and long-term corrosion.
The 17oz Brushed Steel Competition Pitcher with Long Spout brings WPM's functional refinements to the familiar flat top pitcher. With a round-bottom spout for smooth foam rollover, a lengthened spout for controlled flow, and an angled handle for a pencil-like grip, the #39 gives drawing style artists a dependable tool for 8oz combination pours in daily service and competition.
Interested in showcasing your drawing style latte art with this pitcher? Send your combination pour or etched pour portfolio to support@slowpoursupply.co to learn about working with Slow Pour Supply on product review and testing.

Perfect for 8-12oz cups, these 17oz pitchers provide a horizontal and intentional flow. The result is a controlled flow enabling high definition and contrast in the cup. Available in tapered sharp, narrow, round tip, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
THAMES x WPM 20oz Free Pour Latte Art Competition Pitcher in Brushed Rose Gold
Regular price $61.50 Save $-61.50The THAMES × WPM 20oz Free Pour Latte Art Competition Pitcher was developed for baristas who pour drawing style latte art, where a free pour base is combined with etched or layered detail. Built on WPM's #30 flat top platform, this limited edition collaboration with Bangkok-based barista Platoon "Thames" Seangcharoen introduces a redesigned spout and a curved base that support smooth foam rollover and controlled combination pours.
Finished in Brushed Rose Gold, this edition pairs competition-focused engineering with a satin metallic exterior over 304 (18/8) stainless steel. The goal of the collaboration was not to reinvent the flat top pitcher, but to refine the details that most affect how milk moves, rolls, and leaves the spout.
WHY YOU'LL LOVE IT
– Smooth foam rollover helps you use nearly every drop of milk in the pitcher for your pour.
– Redesigned round-bottom spout supports the mixed foam flow that drawing style and combination pours rely on.
– Elongated, precisely angled spout delivers a controlled stream for detailed placement.
– Curved vortex base encourages a larger vortex while steaming for smoother, more consistent microfoam.
– Integrated volume gauge in the slanted top gives a visual reference for exact milk volumes.
– Built on the proven WPM #30 flat top body used by baristas in cafés and competitions.
– Laser-etched THAMES design on the body and handle marks this limited edition collaboration.
RECOMMENDED FOR
– 10oz combination pour beverages.
– Drawing style latte art, including combo pour and etched pour designs.
– Competition routines and practice sessions.
– Café service where consistent milk texture matters.
– Latte art training for baristas moving beyond basic free pour patterns.
– Home baristas refining advanced pouring techniques.
ABOUT THE THAMES × WPM COLLABORATION
This pitcher is the result of a collaboration between WPM and Bangkok-based barista Platoon "Thames" Seangcharoen, whose competition experience spans Thailand, Malaysia, Singapore, Hong Kong, and Vietnam, including a First Runner-Up finish at the Thailand Latte Art Championship. The project blends WPM's manufacturing expertise with Thames's background in artistic, drawing style pours.
Rather than designing an entirely new pitcher, the collaboration focused on optimizing the widely used flat top format. New elements were added where they improve function: a spout reshaped for mixed foam flow, a curved base for better milk circulation, and a volume gauge for repeatable measurements. The result keeps the familiar feel of WPM's #30 body while making it more capable for detailed combination pours.
DESIGN FEATURES
REDESIGNED ROUND-BOTTOM SPOUT
The spout was redesigned specifically to benefit mixed foam pours, where the barista needs both fluid milk and lighter foam to leave the pitcher in a controlled way. Its round-bottom profile lets foam roll over smoothly instead of catching at the lip. This allows latte artists to use nearly every drop of milk in the pitcher, which is especially useful when a design depends on finishing details at the end of the pour.
ELONGATED, ANGLED SPOUT
The spout is lengthened and set at a carefully designed angle so it works in tandem with the redesigned spout profile. A longer spout brings the point of release closer to the cup and narrows the stream. This makes precise drawing and controlled placement easier during the detailed stages of a combination pour.
CURVED VORTEX BASE
The curved base promotes a larger vortex during steaming. Better circulation helps air incorporate evenly and supports a smoother foam transition, producing consistent microfoam from one drink to the next. Consistent texture is the foundation for repeatable latte art, both on bar and in competition.
SLANTED TOP WITH INTEGRATED VOLUME GAUGE
The slanted top incorporates a volume gauge that gives a visual reference while filling and steaming. Measuring milk the same way every time supports exact volume control, reduces waste, and helps baristas reproduce the same pour across practice sessions and competition runs.
90° ERGONOMIC HANDLE
The 90° handle accommodates a range of grip styles. It keeps the pitcher stable and comfortable through the full motion of a pour, giving the barista steady command during the fine movements that drawing style patterns require.
WPM #30 FLAT TOP BODY
The pitcher is built on WPM's #30 flat top body, a familiar platform with balanced handling and predictable pouring characteristics. Baristas who already train on the #30 can move to this edition without relearning the basic feel of the pitcher.
BRUSHED ROSE GOLD FINISH AND THAMES ETCHING
The Brushed Rose Gold finish gives the pitcher a satin rose gold look with a textured surface rather than a mirror shine. A unique THAMES design is laser etched on both the body and the handle, identifying this limited edition collaboration without affecting how the pitcher handles.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 600cc (20oz) capacity is sized for approximately 10oz combination pour patterns. This gives enough milk volume for multi-element designs without steaming far more milk than the cup requires.
POURING CHARACTERISTICS
The round-bottom spout and elongated, angled tip work together to produce a smooth, controlled stream with clean foam rollover. This supports drawing style pours where the barista builds a free pour base and then adds etched or layered detail. Because foam leaves the pitcher smoothly, the final portion of milk remains usable for finishing touches.
COMPETITION APPLICATIONS
The integrated volume gauge, curved vortex base, and stable 90° handle support repeatable milk texture and pour control. Those qualities matter on the competition stage, where a routine must be reproduced under pressure. The same consistency also benefits busy café service.
SPECIFICATIONS
|
Specification |
Details |
|
Capacity |
600cc (20oz) |
|
Recommended Drink Size |
Approximately 10oz combination pour beverages |
|
Model |
WPM #30 Flat Top |
|
Material |
304 (18/8) food-grade stainless steel |
|
Finish |
Brushed Rose Gold |
|
Spout |
THAMES collaboration spout, elongated with a round-bottom profile |
|
Base |
Curved vortex base |
|
Handle |
90° ergonomic handle |
|
Volume Gauge |
Integrated into slanted top |
|
Branding |
Laser-etched THAMES design on body and handle |
|
Edition |
Limited edition collaboration |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 × THAMES × WPM 20oz Free Pour Latte Art Competition Pitcher in Brushed Rose Gold.
CARE & MAINTENANCE
Hand wash with warm water and a mild detergent after each use, paying attention to the interior where milk residue collects. Dry the pitcher immediately with a soft cloth to prevent water spots on the brushed finish. Avoid abrasive pads, harsh chemicals, or prolonged soaking. Wipe the exterior with a clean microfiber cloth to keep the rose gold surface looking its best.
FREQUENTLY ASKED QUESTIONS
WHAT MAKES THIS PITCHER DIFFERENT FROM A STANDARD WPM #30 PITCHER?
It keeps the familiar WPM #30 flat top body but adds a redesigned round-bottom spout, an elongated angled tip, a curved vortex base, an integrated volume gauge, and laser-etched THAMES branding.
IS THIS PITCHER GOOD FOR DRAWING STYLE LATTE ART?
Yes. The spout was redesigned to benefit mixed foam pours, and its smooth foam rollover makes it well suited to combo pour and etched pour designs.
WHAT BEVERAGE SIZE IS THIS PITCHER DESIGNED FOR?
The 600cc (20oz) capacity is best suited for approximately 10oz combination pour beverages.
WHY DOES THE CURVED VORTEX BASE MATTER?
The curved base encourages a larger vortex while steaming. This supports a smoother foam transition and more consistent microfoam.
HOW SHOULD I CARE FOR THE BRUSHED ROSE GOLD FINISH?
Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads, harsh chemicals, and prolonged soaking.
The THAMES × WPM 20oz Free Pour Latte Art Competition Pitcher in Brushed Rose Gold reflects a focused collaboration between WPM and Platoon "Thames" Seangcharoen. Each refinement supports smooth foam rollover, consistent milk texture, and controlled pouring for drawing style latte art in both competition and daily service.
Pour drawing style latte art and want to work with us? Send your combo pour or etched pour portfolio to support@slowpoursupply.co to learn about product review and testing opportunities.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
WPM 17oz Competition Pitcher with Long Spout in Gloss White
Regular price $51.00 Save $-51.00Revolutionary-smooth foam roll - perfect for any drawing style
The 17oz Gloss White Competition Pitcher (#37) with Long Spout was developed for baristas who work in drawing style latte art and need precise control over how foam leaves the pitcher. The #37 built on the WPM #39 with a 500cc flat top body, it pairs a lengthened, carefully angled spout with a redesigned round-bottom profile that lets foam roll over the lip smoothly during combination pours.
Sized for 8oz combination pour drinks and finished in gloss white, the #37 refines the familiar flat top pitcher rather than replacing it. An angled handle supports a natural, pencil-like grip, giving the fine, deliberate control that detailed drawing and etched pours depend on.
WHY YOU'LL LOVE IT
– Round-bottom spout lets foam roll over the lip smoothly, so more of the milk in the pitcher can be used in the pour.
– Lengthened spout, set at a carefully designed angle, delivers a controlled flow for combination pour patterns.
– Spout geometry redesigned specifically for mixed foam use in drawing style latte art.
– 500cc / 17oz capacity is sized for 8oz combination pour drinks.
– Angled handle supports a natural, pencil-like grip for fine placement and detail work.
– Flat top body keeps the familiar feel of a common pitcher while improving how it performs.
– Gloss white exterior gives the pitcher a clean, understated look on the bar or competition stage.
RECOMMENDED FOR
– 8oz combination pour beverages.
– Drawing style latte art.
– Combination pour and etched pour work.
– Latte art competition routines and practice sessions.
– Café service in 8 to 12oz cups.
– Baristas refining foam control for detailed, multi-element designs.
DESIGN PHILOSOPHY
The WPM #37 starts from a simple idea: the common flat top pitcher already works, so the goal is to improve it functionally rather than reinvent it. WPM kept the flat top body that baristas know and focused its changes on the elements that most affect foam movement, the spout profile and its angle. The same approach shapes WPM's 600cc #30 flat top pitcher, and the #37 applies it in a smaller 500cc format.
Drawing style latte art asks something different of a pitcher than a standard free pour. Foam needs to leave the spout smoothly and predictably so it can be placed, layered, and then refined. The #39 spout was redesigned around that mixed foam workflow, with a round-bottom shape for smooth rollover and a lengthened, angled profile that keeps the flow controlled.
DESIGN FEATURES
WPM #37 FLAT TOP
The #37 is built on a 500cc flat top body base the on #39 model, the familiar pitcher shape found behind most espresso bars. Keeping this body means baristas moving from a standard pitcher can adapt quickly, since the balance and handling feel recognizable. The improvements are concentrated in the spout, where they have the greatest effect on the pour.
ROUND-BOTTOM SPOUT PROFILE
The spout has a rounded bottom rather than a sharp or pinched channel. This shape allows foam to roll over the lip smoothly instead of breaking or catching at the edge. For drawing style work, a smooth rollover means foam arrives in the cup consistently, and baristas can make full use of the milk in the pitcher for their pour.
LENGTHENED, ANGLED SPOUT
The spout is lengthened and set at a carefully designed angle. It works together with the round-bottom profile to produce a controlled flow, letting the barista place foam deliberately rather than fight a fast or unpredictable stream. That control is especially useful in combination pours, where several elements must be positioned accurately in a single cup.
ANGLED PENCIL-GRIP HANDLE
The handle is angled to support a natural, pencil-like grip. Holding the pitcher this way brings fine wrist and finger control into the pour, similar to drawing with a pen. This helps with small adjustments in placement and flow that detailed drawing style patterns require.
GLOSS WHITE FINISH
The uncoated exterior has a gloss white finished suitable for commercial use. This gives the pitcher a clean, understated appearance that is milk-stain friendly, suits both café service and the competition stage.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 500cc (17oz) capacity is designed for 8oz combination pour style drinks. Within Slow Pour Supply's pitcher lineup, the 17oz size is matched to 8 to 12oz cups, keeping the steamed milk volume appropriate for the drink and limiting waste.
POURING CHARACTERISTICS
The lengthened spout and round-bottom profile work together to deliver a controlled flow with a smooth foam rollover. Foam leaves the pitcher predictably, which supports accurate placement and helps the barista use the milk in the pitcher efficiently through the final stages of the pour.
DRAWING STYLE AND ETCHED POURS
Because the spout was redesigned for mixed foam use, the #39 suits drawing style latte art, including combination pours and etched pours. The smooth rollover lays down foam cleanly for later detail work, and the pencil-like grip supports the precise movements these designs require.
COMPETITION APPLICATIONS
Controlled flow, a familiar flat top body, and an 8oz-focused capacity make the #39 a practical tool for latte art competition routines built around combination and drawing style patterns. Baristas who practice with it during service can carry the same feel to the stage.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#37 |
|
Capacity |
500cc (17oz) |
|
Recommended Drink Size |
8oz combination pour beverages |
|
Recommended Cup Range |
8 to 12oz (Slow Pour Supply 17oz pitcher class) |
|
Top Design |
Flat top |
|
Spout |
Long spout with redesigned round-bottom profile |
|
Handle |
Angled handle for a pencil-like grip |
|
Finish, Exterior |
Gloss White |
|
SKU |
7137ST |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x WPM 17oz Competition Pitcher with Long Spout in Gloss White.
CARE & MAINTENANCE
Wash the pitcher with soap and warm water after every use or shift, focusing on the interior. Milk contains fats, proteins, and sugars that leave residue, and soap breaks down fats that water alone cannot remove. As milk spoils, lactose ferments into lactic acid, which can slowly wear down the protective layer of stainless steel if residue is left to sit.
After washing, dry the pitcher with a towel and leave it right side up to air out. Water left on stainless steel can cause water spots and may encourage corrosion over time. Avoid abrasive pads and harsh chemicals to protect the gloss white exterior.
FREQUENTLY ASKED QUESTIONS
WHAT DRINK SIZE IS THIS PITCHER DESIGNED FOR?
The 500cc (17oz) capacity is designed for 8oz combination pour style drinks. It also falls within Slow Pour Supply's 17oz pitcher class, which is matched to 8 to 12oz cups.
WHAT MAKES THIS PITCHER SUITED TO DRAWING STYLE LATTE ART?
Its spout was redesigned for mixed foam use. The round-bottom profile lets foam roll over the lip smoothly, and the lengthened, angled spout keeps the flow controlled, which supports the precise foam placement that combination and etched pours rely on.
HOW IS THE #39 DIFFERENT FROM WPM'S SLANTED TOP PITCHERS?
The #39 uses a flat top body, the familiar shape of a common milk pitcher, rather than WPM's signature slanted top. Its performance improvements come from the redesigned long spout and angled handle instead of the rim design.
WHAT DOES THE ANGLED HANDLE DO?
The handle is angled to support a natural, pencil-like grip. This grip brings finer finger and wrist control into the pour, which helps with small, deliberate movements in detailed patterns.
HOW SHOULD I CLEAN THE PITCHER?
Wash it with soap and warm water after every use or shift, focusing on the interior. Dry it with a towel, then leave it right side up to air out to prevent water spots and long-term corrosion.
The 17oz Gloss White Competition Pitcher with Long Spout brings WPM's functional refinements to the familiar flat top pitcher. With a round-bottom spout for smooth foam rollover, a lengthened spout for controlled flow, and an angled handle for a pencil-like grip, the #39 gives drawing style artists a dependable tool for 8oz combination pours in daily service and competition.
Interested in showcasing your drawing style latte art with this pitcher? Send your combination pour or etched pour portfolio to support@slowpoursupply.co to learn about working with Slow Pour Supply on product review and testing.

Perfect for 8-12oz cups, these 17oz pitchers provide a horizontal and intentional flow. The result is a controlled flow enabling high definition and contrast in the cup. Available in tapered sharp, narrow, round tip, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
WPM 10oz Standard Commercial Pitcher in Brushed Steel
Regular price $29.00 Save $-29.00The WPM 10oz Standard Commercial Pitcher in Brushed Steel is a compact working pitcher built for the pace of daily café service. Sized for 6 to 8oz drinks, it focuses on volume consistency, with two printed milk volume indicators that give bar teams a dependable reference for steaming consistent milk portions drink after drink. Its design pairs a classic flat top body with a wide base, long-necked spout.
Where many latte art pitchers are tuned around a single pour style, this pitcher is built around consistency and durability. Its brushed, uncoated 304 stainless steel construction, inside and out, is made for heavy daily handling and frequent washing, while delivering the same WPM build quality baristas already rely on across the brand's pitcher range.
WHY YOU'LL LOVE IT
– Compact 10oz capacity is sized for 6 to 8oz drinks, keeping milk volume matched to the cup.
– Printed volume indicators at 6oz and 4oz help standardize milk portions across the whole bar team.
– Narrow spout tip with a wide spout base and long neck supports a controlled, balanced service pour.
– Standard flat top provides a familiar, level rim that feels natural to most commercial service baristas.
– Brushed, uncoated 304 stainless steel inside and out is built to handle commercial use and repeated washing.
– The same WPM build quality found throughout its professional pitcher lineup.
RECOMMENDED FOR
– 6 to 8oz milk beverages.
– High-volume café service.
– Steaming repeatable milk portions to the 4oz or 6oz mark.
– Everyday small-format milk drinks in high-volume spaces.
– Shared bar stations where several baristas use the same pitchers each shift.
– Baristas who prefer a traditional flat top pitcher.
– Cafés looking for an uncoated, commercial-grade pitcher that holds up to constant use.
DESIGN PHILOSOPHY
WPM is widely recognized for latte art pitchers built around specialized spouts and its signature slanted top. The Standard Commercial Pitcher takes a different approach. It returns to the commercial flat top form and focuses on the details that matter most behind a busy bar: portion consistency, a controlled pour, and a construction that keeps performing through long service days.
Rather than relying on coatings or decorative finishes, the pitcher is left as brushed, uncoated stainless steel inside and out. The result is a practical service pitcher with nothing to chip or wear away, designed to be filled, steamed, poured, and washed repeatedly while maintaining WPM's quality standards.
DESIGN FEATURES
STANDARD FLAT TOP
The flat top gives the pitcher a level rim, the traditional form most beginner baristas learn on. Its standard shape makes it easy for any barista on shift to pick up and pour without adjusting their technique. This familiarity supports consistency across a team where latte art is not the main focus, and pitchers are shared between stations and drinks.
NARROW SPOUT WITH WIDE BASE AND LONG NECK
The spout combines a narrow tip with a wide spout base and a long spout neck. The wide base gathers milk from the body and guides it smoothly into the spout, while the long neck extends the pour point and the narrow tip shapes the milk into a focused stream. Together, these elements help beginner baristas place milk accurately and draw cleaner, more defined lines during service pours.
DUAL PRINTED VOLUME INDICATORS
Two printed milk volume indicators mark the 6oz and 4oz fill levels. They give baristas a quick visual reference while filling the pitcher, so milk portions stay consistent from drink to drink and from one barista to the next. Filling to a set mark also reduces milk waste and helps keep drink recipes standardized across busy periods.
10OZ COMMERCIAL CAPACITY
The 10oz body is sized for 6 to 8oz drinks, so baristas steam only the milk the cup needs. It still leaves headroom above the indicated fill levels, giving milk space to expand and circulate as it is steamed. This helps prevent overflow during texturing and keeps the compact pitcher easy to control in high-volume service.
BRUSHED, UNCOATED 304 STAINLESS STEEL
The pitcher is built from 304 (18/8) food-grade stainless steel, an alloy valued for its corrosion resistance. Both the interior and exterior are left uncoated with a brushed finish. With no coating to chip or wear, the pitcher is suited to the constant handling and washing of commercial use, and the brushed texture helps disguise the light scuffs that come with daily service.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 10oz capacity is designed for 6 to 8oz drinks. Matching pitcher size to cup size keeps the milk volume appropriate for the drink and avoids steaming far more milk than the pour requires, which reduces leftover milk at the end of each drink.
MILK PORTIONING
The 6oz and 4oz indicators give two consistent fill points for common milk portions. Steaming to a set mark helps each drink come out the same, regardless of who is on bar, and reduces the guesswork that often leads to over-steaming and wasted milk.
POURING CHARACTERISTICS
The narrow spout tip produces a focused stream, while the wide spout base and long neck guide milk smoothly from the body to the pour point. This combination supports controlled placement and defined lines, making the pitcher well suited to everyday latte art patterns during service.
WORKFLOW
The flat top, printed indicators, and uncoated construction are designed around repetition. Baristas can fill, steam, pour, and rinse quickly between drinks, and the durable stainless steel build is made to keep up with heavy daily use across long shifts.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Product |
Standard Commercial Pitcher |
|
Capacity |
10oz |
|
Recommended Cup Size |
6 to 8oz |
|
Volume Indicators |
Two printed milk volume indicators at 6oz and 4oz |
|
Top Design |
Standard flat top |
|
Spout |
Standard narrow spout with wide spout base and long spout neck |
|
Material |
304 (18/8) food-grade stainless steel |
|
Finish, Interior |
Brushed, uncoated |
|
Finish, Exterior |
Brushed, uncoated |
|
Intended Use |
Commercial café service |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x WPM 10oz Standard Commercial Pitcher in Brushed Steel.
CARE & MAINTENANCE
Hand wash the pitcher with warm water and a mild detergent after each use, focusing on the interior where milk residue collects. Dry it promptly with a soft cloth to prevent water spots. Avoid abrasive pads, harsh chemicals, and prolonged soaking, which can wear the printed volume indicators over time. Do not leave milk residue sitting in the pitcher, as it can build up and affect cleanliness and flavor.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 10oz capacity is designed for 6 to 8oz drinks. Its compact size keeps milk volume matched to the cup, which helps reduce leftover steamed milk.
HOW IS THIS DIFFERENT FROM A WPM LATTE ART PITCHER?
This pitcher uses a standard flat top instead of WPM's signature slanted top, and it is finished in brushed, uncoated stainless steel inside and out. It is designed primarily for commercial service, with dual printed volume indicators for consistent milk portioning.
WHAT ARE THE 6OZ AND 4OZ INDICATORS USED FOR?
They mark two fill levels so baristas can measure milk quickly and consistently. Filling to a set mark keeps drinks uniform across the bar team and helps reduce milk waste.
IS THE PITCHER COATED?
No. Both the interior and exterior are brushed, uncoated 304 (18/8) food-grade stainless steel. There is no coating to chip or wear during commercial use.
CAN I POUR LATTE ART WITH THIS PITCHER?
Yes. The narrow spout tip, wide spout base, and long neck work together to produce a focused, controlled stream that supports defined lines for everyday service patterns.
HOW SHOULD I CARE FOR THE PRINTED VOLUME INDICATORS?
Hand wash with warm water and a mild detergent, and avoid abrasive pads, harsh chemicals, and prolonged soaking. Gentle cleaning helps the printed markings stay legible over time.
The WPM 10oz Standard Commercial Pitcher in Brushed Steel brings WPM's build quality to a compact, classic flat top form designed for the realities of café service. With dual printed volume indicators, a controlled narrow spout, and a fully uncoated stainless steel construction, it gives bar teams a dependable pitcher for consistent milk portions in 6 to 8oz drinks, shift after shift.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
WPM 20oz Standard Commercial Pitcher in Brushed Steel
Regular price $31.00 Save $-31.00The WPM 20oz Standard Commercial Pitcher in Brushed Steel is a working pitcher built for the pace of daily café service. It focuses on volume consistency with the two printed milk volume indicators gives bar teams a dependable tool for steaming consistent milk portions and pouring drink after drink. Its design pairs a classic flat top body with a wide base, long-necked spout.
Where many latte art pitchers are tuned around a single pour style, this pitcher is built around consistency and durability. Its brushed, uncoated 304 stainless steel construction, inside and out, is made for heavy daily handling and frequent washing, while delivering the same WPM build quality baristas already rely on across the brand's pitcher range.
WHY YOU'LL LOVE IT
– 20oz capacity gives room to steam larger milk batches for busy service.
– Printed volume indicators at 9oz and 7.5oz help standardize milk portions across the whole bar team.
– Narrow spout tip with a wide spout base and long neck supports a controlled, balanced service pour.
– Standard flat top provides a familiar, level rim that feels natural to most commercial service baristas.
– Brushed, uncoated 304 stainless steel inside and out is built to handle commercial use and repeated washing.
– The same WPM build quality found throughout its professional pitcher lineup.
RECOMMENDED FOR
– High-volume café service.
– Steaming repeatable milk portions to the 7.5oz or 9oz mark.
– Everyday lattes and other milk-based drinks at high volume spaces.
– Shared bar stations where several baristas use the same pitchers each shift.
– Baristas who prefer a traditional flat top pitcher.
– Cafés looking for an uncoated, commercial-grade pitcher that holds up to constant use.
DESIGN PHILOSOPHY
WPM is widely recognized for latte art pitchers built around specialized spouts and its signature slanted top. The Standard Commercial Pitcher takes a different approach. It returns to the commerical flat top form and focuses on the details that matter most behind a busy bar: portion consistency, a controlled pour, and a construction that keeps performing through long service days.
Rather than relying on coatings or decorative finishes, the pitcher is left as brushed, uncoated stainless steel inside and out. The result is a practical service pitcher with nothing to chip or wear away, designed to be filled, steamed, poured, and washed repeatedly while maintaining WPM's quality standards.
DESIGN FEATURES
STANDARD FLAT TOP
The flat top gives the pitcher a level rim, the traditional form most beginner baristas learn on. Its standard shape makes it easy for any barista on shift to pick up and pour without adjusting their technique. This familiarity supports consistency across a team where latte art is not the main focus, and pitchers are shared between stations and drinks.
NARROW SPOUT WITH WIDE BASE AND LONG NECK
The spout combines a narrow tip with a wide spout base and a long spout neck. The wide base gathers milk from the body and guides it smoothly into the spout, while the long neck extends the pour point and the narrow tip shapes the milk into a focused stream. Together, these elements help beginner baristas place milk accurately and draw cleaner, more defined lines during service pours.
DUAL PRINTED VOLUME INDICATORS
Two printed milk volume indicators mark the 9oz and 7.5oz fill levels. They give baristas a quick visual reference while filling the pitcher, so milk portions stay consistent from drink to drink and from one barista to the next. Filling to a set mark also reduces milk waste and helps keep drink recipes standardized across busy periods.
20OZ COMMERCIAL CAPACITY
The 20oz body leaves headroom above the indicated fill levels, giving milk space to expand and circulate as it is steamed. This extra room helps prevent overflow during texturing and keeps the pitcher manageable when steaming larger portions in high-volume service.
BRUSHED, UNCOATED 304 STAINLESS STEEL
The pitcher is built from 304 (18/8) food-grade stainless steel, an alloy valued for its corrosion resistance. Both the interior and exterior are left uncoated with a brushed finish. With no coating to chip or wear, the pitcher is suited to the constant handling and washing of commercial use, and the brushed texture helps disguise the light scuffs that come with daily service.
PERFORMANCE
MILK PORTIONING
The 9oz and 7.5oz indicators give two consistent fill points for common milk portions. Steaming to a set mark helps each drink come out the same, regardless of who is on bar, and reduces the guesswork that often leads to over-steaming and wasted milk.
POURING CHARACTERISTICS
The narrow spout tip produces a focused stream, while the wide spout base and long neck guide milk smoothly from the body to the pour point. This combination supports controlled placement and defined lines, making the pitcher well suited to everyday latte art patterns during service.
WORKFLOW
The flat top, printed indicators, and uncoated construction are designed around repetition. Baristas can fill, steam, pour, and rinse quickly between drinks, and the durable stainless steel build is made to keep up with heavy daily use across long shifts.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Product |
Standard Commercial Pitcher |
|
Capacity |
20oz |
|
Volume Indicators |
Two printed milk volume indicators at 9oz and 7.5oz |
|
Top Design |
Standard flat top |
|
Spout |
Standard narrow spout with wide spout base and long spout neck |
|
Material |
304 (18/8) food-grade stainless steel |
|
Finish, Interior |
Brushed, uncoated |
|
Finish, Exterior |
Brushed, uncoated |
|
Intended Use |
Commercial café service |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x WPM 20oz Standard Commercial Pitcher in Brushed Steel.
CARE & MAINTENANCE
Hand wash the pitcher with warm water and a mild detergent after each use, focusing on the interior where milk residue collects. Dry it promptly with a soft cloth to prevent water spots. Avoid abrasive pads, harsh chemicals, and prolonged soaking, which can wear the printed volume indicators over time. Do not leave milk residue sitting in the pitcher, as it can build up and affect cleanliness and flavor.
FREQUENTLY ASKED QUESTIONS
HOW IS THIS DIFFERENT FROM A WPM LATTE ART PITCHER?
This pitcher uses a standard flat top instead of WPM's signature slanted top, and it is finished in brushed, uncoated stainless steel inside and out. It is designed primarily for commercial service, with dual printed volume indicators for consistent milk portioning.
WHAT ARE THE 9OZ AND 7.5OZ INDICATORS USED FOR?
They mark two fill levels so baristas can measure milk quickly and consistently. Filling to a set mark keeps drinks uniform across the bar team and helps reduce milk waste.
IS THE PITCHER COATED?
No. Both the interior and exterior are brushed, uncoated 304 (18/8) food-grade stainless steel. There is no coating to chip or wear during commercial use.
CAN I POUR LATTE ART WITH THIS PITCHER?
Yes. The narrow spout tip, wide spout base, and long neck work together to produce a focused, controlled stream that supports defined lines for everyday service patterns.
HOW SHOULD I CARE FOR THE PRINTED VOLUME INDICATORS?
Hand wash with warm water and a mild detergent, and avoid abrasive pads, harsh chemicals, and prolonged soaking. Gentle cleaning helps the printed markings stay legible over time.
The WPM 20oz Standard Commercial Pitcher in Brushed Steel brings WPM's build quality to a classic flat top form designed for the realities of café service. With dual printed volume indicators, a controlled narrow spout, and a fully uncoated stainless steel construction, it gives bar teams a dependable pitcher for consistent milk portions and repeatable pours, shift after shift.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
UFO Dripper V2 in Midnight with the option to add filter
Regular price $45.00 Save $-45.00The UFO Dripper is compatible with a wide range of filters. Please make your selection to find your fit!
An unprecedented 80º interior angle
The team at UFO Dripper aimed at creating the cup profiles they love from conicals brewers. They have found that the 80º interior angle of this brewer design slows down the brew to maintain a respectable contact time even with the air channels, and means that it's less sensitive to smaller doses. This is because the shallower the brewer walls, the less the bed depth changes with varying doses. The angle also contributes to greater accumulation of fines above the bed, further increasing clarity.
UFO is designed to be the most forgiving conical brewer, using an unprecedented 80º interior angle, creating consistency the UFO team is looking for.
Air Channel Technology
UFO incorporates air channels instead of protruding ribs, which combined with the Disputer tool allows for the perfect filter set and consistent bypass. The air channels also contribute to equalizing the air pressure above and below the carafe, mitigating any risk of stalling.
Thermal Stability
The UFO team conducted extensive thermal testing, leading them to the current single-walled, solid Tritan design for the injection-molded V2. The Tritan material maintains superior thermal stability in the slurry, while also being extremely resistant to warping at boiling temperatures.
Filters Compatibility
Compatible with variety of filters.
UFO Type A, Sibarist UFO Special Edition, Sibarist UFO B3 Flat
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Using Sibarist Flat Papers
UFO was designed for use with Sibarist Fast flat and B3 papers, although this template can be used to fold any flat filter. Simply fold once in half, then fold to match the angle below (feel free to take a screenshot and print this diagram).

WPM x IVY MTS 17oz Tapered Spout Milk Pitcher #15 SPOUT - Gloss Silver
Regular price $44.00 Save $-44.00The IVY is precision-engineered for intermediate-to-advanced baristas who require stable, repeatable control over fine-line patterning. Its tapered sharp spout is specifically optimized for drag-and-draw technique, channeling milk flow into a narrow, controlled stream capable of producing intricate detail work that broader spout geometries cannot replicate.
The wide 2.75" body diameter maintains milk volume and temperature stability during the pour, while the seamless trapezoid handle provides a consistent grip across multiple hand positions. The signature WPM slanted top design integrates triple volume indicators at 120, 180, and 240 mL, allowing precise milk-to-espresso ratio management without interrupting workflow.
Specifications
- Spout tapered sharp-tip profile, optimized for drag-and-draw latte art
- Volume indicators three-point engraved scale at 120 / 180 / 240 mL
- Handle seamless trapezoid construction, full-grip compatibility
- Body diameter 2.75" wide base for pour stability
- Coating fingerprint-resistant exterior finish
- Material 304 18/8 stainless steel, uncoated food-safe interior
- Weight lightweight build for reduced hand fatigue during high-volume service
Intermediate – Advanced Level

Perfect for 8-12oz cups, these 17oz pitchers provide a horizontal and intentional flow. The result is a controlled flow enabling high definition and contrast in the cup. Available in tapered sharp, narrow, round tip, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
TAPERED SHARP SPOUT

Designed by 2016 New York Coffeefest Latte Art Champion IVY LKY, you can find this lipped sharp, tapered spout on our 8oz and 17oz IVY LKY Pitchers. Suitable for fine, delicate lines. it is perfect for a very precise, controlled flow. Suitable for combination patterns, free pour drawings, and finer line rosettas
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz







































































































































![TANAT x APAX LAB Lucid [2.1] Mineral Concentrate in 20ml](http://sluwpuursupply.com/cdn/shop/files/TanatApaxLucid2.1-2_{width}x.png?v=1785894813)
![TANAT x APAX LAB Lucid [2.1] Mineral Concentrate in 20ml](http://sluwpuursupply.com/cdn/shop/files/TanatApaxLucid2.1-3_{width}x.png?v=1785894813)
![TANAT x APAX LAB Lucid [2.1] Mineral Concentrate in 20ml](http://sluwpuursupply.com/cdn/shop/files/TanatApaxLucid2.1-4_{width}x.png?v=1785894813)
![TANAT x APAX LAB Lucid [2.1] Mineral Concentrate in 20ml](http://sluwpuursupply.com/cdn/shop/files/TanatApaxLucid2.1-5_{width}x.png?v=1785894813)
![TANAT x APAX LAB Lucid [2.1] Mineral Concentrate in 20ml](http://sluwpuursupply.com/cdn/shop/files/TanatApaxLucid2.1-7_{width}x.png?v=1785894813)
![TANAT x APAX LAB Lucid [2.1] Mineral Concentrate in 20ml](http://sluwpuursupply.com/cdn/shop/files/TanatApaxLucid2.1_{width}x.png?v=1785894813)




























































